OSG Radius End Mills

Osg 3101011 Corner Radius End Mill: Carbide, Wxs Coated, 2 Flute, 1 Mm Mill Dia, 0.8 Mm Loc, 0.2 Mm Rad

Osg 3101012 Corner Radius End Mill: Carbide, Wxs Coated, 2 Flute, 1 Mm Mill Dia, 0.8 Mm Loc, 0.2 Mm Rad

Osg 3101013 Corner Radius End Mill: Carbide, Wxs Coated, 2 Flute, 1 Mm Mill Dia, 0.8 Mm Loc, 0.2 Mm Rad

Osg 3101014 Corner Radius End Mill: Carbide, Wxs Coated, 2 Flute, 1 Mm Mill Dia, 0.8 Mm Loc, 0.2 Mm Rad

Osg 37700019 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 6 Mm Mill Dia, 13 Mm Loc, 0.5 Mm Rad

Osg 37700020 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 6 Mm Mill Dia, 13 Mm Loc, 1 Mm Rad

Osg 37700013 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 4 Mm Mill Dia, 11 Mm Loc, 0.5 Mm Rad

Osg 37700014 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 4 Mm Mill Dia, 11 Mm Loc, 1 Mm Rad

Osg 37700015 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 5 Mm Mill Dia, 13 Mm Loc, 0.2 Mm Rad

Osg 37700016 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 5 Mm Mill Dia, 13 Mm Loc, 0.5 Mm Rad

Osg 37700017 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 5 Mm Mill Dia, 13 Mm Loc, 1 Mm Rad

Osg 37700018 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 6 Mm Mill Dia, 13 Mm Loc, 0.2 Mm Rad

Osg 37700021 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 6 Mm Mill Dia, 13 Mm Loc, 1.5 Mm Rad

Osg 37700022 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 6 Mm Mill Dia, 13 Mm Loc, 2 Mm Rad

Osg 37700023 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 8 Mm Mill Dia, 19 Mm Loc, 0.5 Mm Rad

Osg 37700024 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 8 Mm Mill Dia, 19 Mm Loc, 1 Mm Rad

Osg 37700025 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 8 Mm Mill Dia, 19 Mm Loc, 1.5 Mm Rad

Osg 37700026 Corner Radius End Mill: Carbide, Wxl Coated, 2 Flute, 8 Mm Mill Dia, 19 Mm Loc, 2 Mm Rad

Osg 37700027 Cor Rad End Mill, 10.00mm, Carb, 0.50mm Rad

Osg 37700028 Cor Rad End Mill, 10.00mm, Carb, 1.00mm Rad

Osg 37700029 Cor Rad End Mill, 10.00mm, Carb, 1.50mm Rad

Osg 37700030 Cor Rad End Mill, 10.00mm, Carb, 2.00mm Rad

Osg 37700031 Cor Rad End Mill, 10.00mm, Carb, 3.00mm Rad

Osg 3097423 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097424 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097425 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097426 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097441 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097442 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097443 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097444 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097453 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097454 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097461 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097462 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097472 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 4 Mm Mill Dia, 6 Mm Loc, 1 Mm Rad

Osg 3097627 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 6 Mm Mill Dia, 9 Mm Loc, 1.5 Mm Rad

Osg 3098046 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 10 Mm Mill Dia, 15 Mm Loc, 2 Mm Rad

Osg 3098051 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 10 Mm Mill Dia, 15 Mm Loc, 2 Mm Rad

Osg 3098053 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 10 Mm Mill Dia, 15 Mm Loc, 2 Mm Rad

Osg 3098061 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 10 Mm Mill Dia, 15 Mm Loc, 2 Mm Rad

Osg 3098064 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 10 Mm Mill Dia, 15 Mm Loc, 2 Mm Rad

Osg 3098224 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 12 Mm Mill Dia, 18 Mm Loc, 2 Mm Rad

Osg 3098241 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 12 Mm Mill Dia, 18 Mm Loc, 2 Mm Rad

Osg 3098242 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 12 Mm Mill Dia, 18 Mm Loc, 2 Mm Rad

Osg 3098243 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 12 Mm Mill Dia, 18 Mm Loc, 2 Mm Rad

Osg 3098244 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 12 Mm Mill Dia, 18 Mm Loc, 2 Mm Rad

Osg 3098254 Corner Radius End Mill: Carbide, Wxs Coated, 3 Flute, 12 Mm Mill Dia, 18 Mm Loc, 2 Mm Rad

Osg 36700111 Corner Radius End Mill: Carbide, Wxl Coated, 4 Flute, 1/16" Mill Dia, 3/16" Loc, 0.01" Rad

Osg 36700211 Corner Radius End Mill: Carbide, Wxl Coated, 4 Flute, 5/64" Mill Dia, 1/4" Loc, 0.01" Rad

Osg 36700311 Corner Radius End Mill: Carbide, Wxl Coated, 4 Flute, 3/32" Mill Dia, 3/8" Loc, 0.01" Rad

Osg 36702611 Corner Radius End Mill: Carbide, Wxl Coated, 4 Flute, 1/2" Mill Dia, 1" Loc, 0.02" Rad, 3" Oal

Osg 36702711 Corner Radius End Mill: Carbide, Wxl Coated, 4 Flute, 1/2" Mill Dia, 1" Loc, 0.03" Rad, 3" Oal

Osg 36702811 Corner Radius End Mill: Carbide, Wxl Coated, 4 Flute, 1/2" Mill Dia, 1" Loc, 0.045" Rad, 3" Oal

Osg 36702911 Corner Radius End Mill: Carbide, Wxl Coated, 4 Flute, 1/2" Mill Dia, 1" Loc, 0.06" Rad, 3" Oal

Osg 37700032 Cor Rad End Mill, 12.00mm, Carb, 0.50mm Rad

Osg 37700033 Cor Rad End Mill, 12.00mm, Carb, 1.00mm Rad

Osg 37700034 Cor Rad End Mill, 12.00mm, Carb, 1.50mm Rad

Osg 37700035 Cor Rad End Mill, 12.00mm, Carb, 2.00mm Rad

Osg 37700036 Cor Rad End Mill, 12.00mm, Carb, 3.00mm Rad