Schneider Electric NSYCVF85M24DPF Climasys Forced Vent. IP54, 85m3/h, 24V Dc, With Outlet Grille and Filter G2

ClimaSys CV Axial motor ventilator. 24V DC 50Hz or 60Hz. 7.6W 50 Hz. Free flow rate with standard filter of 80 m3/h at 50 Hz. 170 x 150 x 62 mm. Cut-out dimensions of 125 x 125 mm. Outlet grille injected thermoplastic (ASA PC), Grey RAL 7035. Connections terminals by cable. 2 protective grille on the front and rear surfaces. Protection IP54.

Main

• Range: ClimaSys
• Product name: ClimaSys CV
• Product or Component Type: Fan
• Type of Filter: Standard
• Flow Rate: Free flow rate with standard filter: 80 m3/h
• Rated Supply Voltage: 10...27.6 V (Us)
• Input Voltage: 24 V DC

Complementary:

• Absorbed Power: 7.6 W
• Rated Current: 0.3 A (In)
• Noise Level (dB): 46…49 dB
• Bearing Type: Ball
• Height: External: 170 mm
• Width: External: 150 mm
• Depth: External: 62 mm
• Cut-Out Dimensions: 125 x 125 mm
• Net Weight: 0.48 kg
• Material: Outlet grille: injected thermoplastic (ASA PC)
• Colour: Outlet grille: grey (RAL 7035)
• Ambient Air Temperature for Operation: -10…70 °C
• Ambient Air Temperature for Storage: -40…70 °C
• Maximum Pressure: 50 Pa flow rate 0 m³/h
• Connections - Terminals: Cable
• IP Degree of Protection: IP54
• Device Composition:
• 1 axial motor
• 2 protective grille: on the front and rear surfaces
• 1 filter: front of axial motor
• 1 outlet grille: front
• 1 cut-out template
• 1 power cord
• Condition of Use:
• Overfrequent filter replacement should be avoided
• Outside temperature must be 5 °C lower than inside temperature
• Surrounding environment must be relatively clean
• Filter must be cleaned and replaced regularly
• Flow Rates Depend on the Work Point, see ProClima software