Lumberg Automation 935702003 0980 LSL 3210-121-0006-004 LioN-Xlight 4xIO-Link Class A, 8DI With Ethercat

• Product Family: I/O Systems: Active - Standalone
• Product Sub Family: LioN-Xlight
• Item Description: 0980 LSL 3210-121-0006-004
• Device Type: IO-Link Master
• Protocol: EtherCAT
• I/O Function: 4 IOL (Class A) + 8 DI
• Bus Connection: M12, 4-poles, D-coded
• Power Connection (System Supply): M12 Power, 5-poles, L-coded
• I/O Connection: M12, 5-poles, A-coded
• I/O Type: IO-Link Master

General Data:

• Housing Material: Metal, zinc die-cast
• Housing Plating: Nickel, matt
• Housing Color: Grey Metallic
• Protection Degree / IP Rating: IP65, IP67, IP69K
• Potted: Yes
• Dimensions (W x H x D): 60 mm x 31 mm x 200 mm
• Weight: 500 g
• Ambient Temperature (Operation): -20 °C to 60 °C
• Ambient Temperature (Storage/Transport): -20 °C to 60 °C
• Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)
• Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)
• Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)
• Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)
• Flammability Class: UL 94 (IEC 61010)
• Protection Class: III, IEC 61140, EN 61140, VDE 0140-1
• Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1
• Vibration Resistance: 15 g / 5 -500 Hz
• Shock Resistance: 50 g / 11ms
• Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated
• Contact Bearer Material: PA / TPU
• O-Ring Material: FKM
• Mounting: 2 hole screw mounting (Use standard M4 x 25 / 30 screws with toothed lock washer and self-locking nuts)
• Fastening Torque (Fixing Screw): M4: 1 Nm
• Fastening Torque (Ground Connection (FE)): M4: 1 Nm
• Fastening Torque (Bus Connection): M12: 0.5 Nm
• Fastening Torque (Power Connection): M12: 0.5 Nm
• Fastening Torque (I/O Connection): M12: 0.5 Nm
• Accessories to Order Separately: Ethernet cable, mounting adapter, sensor/actuator cable, power cable

EtherCAT:

• Protocol: EtherCAT
• Connection: M12 4-poles, D-coded
• Number of Connections: 2
• Specification: ETG.1000 V1.2
• Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex
• Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing
• Cycle Time / Update Rate: min. 250 µs
• Addressing: Auto-increment addressing, fixed position addressing
• Mailbox Protocols: CANopen over EtherCAT (CoE), File access over EtherCAT (FoE), Ethernet over EtherCAT (EoE), ADS over EtherCAT (AoE)
• Supported Network Protocols (Other): Over EoE: HTTP, Ping, TCP/IP, Modbus TCP, REST API
• Cyclic Data Read/Write, Diagnosis Data, Event Data

Power Supply:

• Connection Module Supply Voltage: M12 Power, 5-poles, L-coded
• Number of Connections: 2
• Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)
• Module Supply Voltage (Range): 20V DC to 30 V DC
• Reverse Polarity Protection: Yes
• Status Indicator (System Supply): LED green
• Diagnostic Indicator: LED red
• Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded
• Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)
• Sensor Supply Voltage (Range): 20V DC to 30 V DC
• Reverse Polarity Protection: Yes
• Status Indicator (Sensor Supply): LED green
• Diagnostic Indicator: LED red

IO-Link Master Channels:

• Number of IO-Link Master Channels: max. 4, configurable
• Connection: M12, 5-poles, A-coded
• IO-Link Class A Ports: 4x, X1 to X4
• IO-Link Specification: V1.1.3
• Parameter Storage: Supported
• Supported COM Modes: 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)
• Cycle Time / Update Rate: min. 1 ms for all channels at 32 Byte IN / OUT
• Nominal Current 1L+ (Pin 1): 2A
• Nominal Voltage: 24 V DC via US (system power supply)
• Nominal Current C/Q (Pin 4): 500mA
• Perm. Conductor Length to Device: ≤ 20 m
• Status Indicator (IOL): LED green per channel
• Diagnostic Indicator: LED red per port

Digital Input Channels:

• Number of Digital Input Channels: up to 16
• Connection: M12, 5-poles, A-coded
• Number of Ports: 8x, X1 to X8
• Channel Type: Type 1 acc. to IEC 61131-2
• Input Wiring: 2-, 3-, 4-wire
• Nominal Voltage: 24 V DC via US (module power supply)
• Sensor Current Supply: max. 4A per port via Pin1L+
• Sensor Type: PNP
• Input Voltage Range "0" signal: -3 V DC …+5 V DC
• Input Voltage Range "1" signal: 15 V DC ... 30 V DC
• Input Filter Time: configurable
• Protective Circuit: Electronically: Overload protection, short-circuit protection
• Status Indicator (Inputs): LED white or yellow per channel
• Diagnostic Indicator: LED red per port

Digital Output Channels:

• Number of Digital Output Channels: up to 4
• Connection: M12, 5-poles, A-coded
• Number of Ports: 8x, X1 to X4
• Channel Type: p-switching
• Output Wiring: 2-, 3-wire
• Nominal Voltage: 24 V DC via US
• Output Current per Channel: max. 500mA
• Galvanically Isolated: No
• Protective Circuit: Electronically: Overload protection, short-circuit protection
• Overload Behavior: Auto off and on switching / Manual restart
• Status Indicator (Outputs): LED white or yellow per channel
• Diagnostic Indicator: LED red per port

Electrical Isolation:

• US (System Supply Voltage) / FE: 500 V DC
• US / UL (Actuator Supply Voltage): 500 V DC
• UL / FE: 500 V DC
• Uaux / FE: 500 V DC
• Bus connection / FE: 2000 V DC

EMC Conformance:

• EMC Directive: 2014/30/EU
• EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge
• EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m
• EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV
• EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m
• EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V
• EN 55032 Radio Interference Properties: Class A

Safety & Environmental Compliance:

• CE: Yes
• RoHS Compliant: Yes
• China RoHS-Compliant: Yes

Approvals:

• UL: cULus Listed, UL 61010-1
• CSA: Yes, via UL
• ETG: Yes
• IO-Link: Yes

Notes:

• Protection Degree / IP Rating Note: IP Rating test performed by Belden with Belden Connectors only
• System Power Supply Connection Note: Do not connect / disconnect under voltage!