Henkel Authorized Distributor

Certification of Quality (COQ) included

LOCTITE 518 Gasket Eliminator Flange Sealant

LOCTITE 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminium and steel flanged mating surfaces. Fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.

Features:

• Semi-flexible, medium-strength anaerobic flange gasket
• For active and inactive rigid metal flanges
• Cures through minor surface contamination
• Adapts to flange surface irregularities and gaps up to 0.25 mm
• Gel-type consistency
• Seals instantly against low pressure
• Reduces inventory costs – no need for large inventory of cut gaskets
• Resists high pressure when fully cured
• No compression set or misaligned gaskets
• Easy to automate
• Reduces process costs – eliminates manual assembly of conventional gaskets
• LOCTITE 518 Providing:
• Higher strength on contaminated surfaces
• Better flexibility and improved adhesion
• Enhanced sealing capability
• Improved gap cure
• High performance on passive metals without an activator

Specification:

• Brand: LOCTITE
• Product Type: Flange Sealant
• Colour: Red
• Fixture Time: 25 min
• Fixture Time Temperature: 77°F
• Full Cure Temperature: 77°F
• Gap Fill: 0.012 inch
• Specific Gravity: 1.1 gal/L
• Specific Gravity Temperature: 25°C
• Substrates: Aluminium
• Temperature: -65-300°F
• Tensile Shear Strength: 1087.78 psi
• Viscosity: 500000-1000000
• Viscosity Temperature: 77°F
• Applications: Rigid Assembly Gasketing
• Weight: 300 ml