Abb PSR12-600-70 Soft Starter 600V 5.5KW

• The softstarter PSR12-600-70 has a rated maximum operational current of 12 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.
• Product netto breedte:114 mm
• Product netto hoogte:140 mm
• Product netto diepte:45 mm
• Product netto gewicht:0.4 kg
• Unit of measurement : Pcs

Technical specifications

• Rated operating voltage:208 ... 600 V AC
• Nominal control voltage (U s ):100 ... 240 V AC
• Rated control circuit voltage ( Uc ):24VDC
• Assigned frequency (f):50/60 Hz
• Main Circuit 50/60 Hz
• Rated operating power - In-line connection (Pe):(230 V) 3 kW
• (400 V) 5.5 kW
• (500 V) 5.5 kW
• Rated operating current - In-line connection (Ie):12 A
• Service factor percentage:100%
• Overload protection:Recommended MS132 10.00 ... 16.00
• Integrated electronic overload:No
• Adjustable rated motor current, Ie:No
• Starting capacity at maximum rated current, i.e.:4xIe for 6s
• Ramp time:0 ... 20 seconds
• 1 ... 10 seconds
• Initial voltage during start:40 ... 70%
• Step down voltage special ramp:100 ... 60 %
• Current limiting function:No
• Switch for Inside Delta connection:No
• Walking signal relay:Yes
• By-pass signal relay:No
• Error signal relay:No
• Overload signal relay:No
• Start ramp completed signal indication (LED):Green
• Signal indication ready to start/standby ON (LED):Green
• Signal indication running R (LED):Green
• Signal indication slope up/down (LED):Green
• Number of starts per hour at 3.5*Ie for 7 sec. 50% ON time 50% OFF time:10
• Communication:FiledBusPlug(Optional)
• Protection degree:IP20
• Terminal Type:Screw
• Main circuit connection capacity:Rigid 1/2 x 0.75 ... 2.5 mm²
• Control circuit connection capacity:1 x 0.75 ... 2.5
• 2 x 0.75 ... 2.5 mm²
• Rigid 1/2 x 0.75 ... 2.5 mm²
• Supply circuit connection capacity:Rigid 1/2 x 0.75 ... 2.5 mm²
• Tightening torque:Control Circuit 1 N·m
• Main Circuit 1 N·m
• Supply Circuit 1 N·m
• Product main type:PSR12
• Function:Soft start with voltage ramp
• Soft stop with voltage ramp