Construction

construction

Building Materials

building-materials

Abrasives

abrasives

Cutting Disc

cutting-disc

Safety

safety

Fire Extinguishers

fire-extinguishers

Grinding Abrasives

grinding-abrasives

Machinery Lubricants

machinery-lubricants

Sealants

sealants

Azfast

TCT saw blade for smooth cutting of  hardwoods, softwoods, chipboards, plywood.

TCT saw blade for smooth cutting of hardwoods, softwoods, chipboards, plywood.

TCT saw blade for smooth cutting of hardwoods, softwoods, chipboards, plywood.

Andy Mo

7" TCT Saw Blade Wood

7" tct saw blade wood "tct cutting disc azfast kayu gergaji azfast/阿兹法斯特 7“ tct锯片木 阿兹法斯特

7-tct-saw-blade-wood

Teeth

Elide Fire

Product type: Indoor Installation for Buildings

Alarm Noise Signal: 113 – 139 dB (Impact Noise as ACGIH 1999 Standard)

Usability and Storage Temperature: Not lower than -40° C and not exceed than +85° C.

The ball is spherical and fit to the hand used for attack fire by throwing, pitching and rolling into fire.

Used for surveillance and automatic fire control at the risk area.

Lightweight and easy to use for people who have not been trained before (children, adults, women and elders).

The materials and chemicals are not harmful to human and environment.

5 years of product lifetime without any maintenance.

Automatically activate within 3-10 seconds when touched to the frame.

Effective extinguish area 360˚ cover 1.80 cubic meter.

The warning sound while the fireball working by created a loud noise not over 140 dB which are under the universal standard.

Class 1-A* fires are fires in ordinary flammable materials such as wood, cloth, paper, rubber, and plastic. Use for surveillance and extinguish the fire by throwing, rolling and tossing to the firebase and can be thrown many units at the same time.

Class 5-B* fires:  install for surveillance at risk area such as chemical storage connection point LPG or NGV when ball touch to the flame. ELIDE FIRE® will activate within 3 – 10 second Effective extinguish area 360˚ cover 1.80 cubic meter. The ball has an alert sound level which is not over 140 dB under international standard level.

Class C*: the fire that cannot use water to extinguish such as electric boards. Install above risk area, when ball touch the flame of fire ELIDE FIRE® will activate within 3 – 10 second Effective extinguish area 360˚ cover 1.80 cubic meter. When the ball activates, it has an alert sound level which is not over 140 dB under international standard level.

Model: ELB01 (6”)Product type: Indoor Installation for BuildingsSize: 6 inchesWeight: 1.3 ± 0.2 kg.Useful life: 5 years (No maintenance)Alarm Noise Signal: 113 – 139 dB (Impact Noise as ACGIH 1999 Standard)Usability and Storage Temperature: Not lower than -40° C and not exceed than +85° C. Specification Gross Weigh 1.3 ± 0.2 Kgs.The ball is spherical and fit to the hand used for attack fire by throwing, pitching and rolling into fire.Used for surveillance and automatic fire control at the risk area.Lightweight and easy to use for people who have not been trained before (children, adults, women and elders).The materials and chemicals are not harmful to human and environment.5 years of product lifetime without any maintenance. OperationAutomatically activate within 3-10 seconds when touched to the frame.Effective extinguish area 360˚ cover 1.80 cubic meter.The warning sound while the fireball working by created a loud noise not over 140 dB which are under the universal standard. The ability to extinguish the fireClass 1-A* fires are fires in ordinary flammable materials such as wood, cloth, paper, rubber, and plastic. Use for surveillance and extinguish the fire by throwing, rolling and tossing to the firebase and can be thrown many units at the same time. Class 5-B* fires: install for surveillance at risk area such as chemical storage connection point LPG or NGV when ball touch to the flame. ELIDE FIRE® will activate within 3 – 10 second Effective extinguish area 360˚ cover 1.80 cubic meter. The ball has an alert sound level which is not over 140 dB under international standard level. Class C*: the fire that cannot use water to extinguish such as electric boards. Install above risk area, when ball touch the flame of fire ELIDE FIRE® will activate within 3 – 10 second Effective extinguish area 360˚ cover 1.80 cubic meter. When the ball activates, it has an alert sound level which is not over 140 dB under international standard level.

Model: ELB01 (6”)
Product type: Indoor Installation for Buildings
Size: 6 inches
Weight: 1.3 ± 0.2 kg.
Useful life: 5 years (No maintenance)
Alarm Noise Signal: 113 – 139 dB (Impact Noise as ACGIH 1999 Standard)
Usability and Storage Temperature: Not lower than -40° C and not exceed than +85° C.

Specification

Gross Weigh 1.3 ± 0.2 Kgs.
The ball is spherical and fit to the hand used for attack fire by throwing, pitching and rolling into fire.
Used for surveillance and automatic fire control at the risk area.
Lightweight and easy to use for people who have not been trained before (children, adults, women and elders).
The materials and chemicals are not harmful to human and environment.
5 years of product lifetime without any maintenance.

Operation
Automatically activate within 3-10 seconds when touched to the frame.
Effective extinguish area 360˚ cover 1.80 cubic meter.
The warning sound while the fireball working by created a loud noise not over 140 dB which are under the universal standard.

The ability to extinguish the fire
Class 1-A* fires are fires in ordinary flammable materials such as wood, cloth, paper, rubber, and plastic. Use for surveillance and extinguish the fire by throwing, rolling and tossing to the firebase and can be thrown many units at the same time.

Class 5-B* fires: install for surveillance at risk area such as chemical storage connection point LPG or NGV when ball touch to the flame. ELIDE FIRE® will activate within 3 – 10 second Effective extinguish area 360˚ cover 1.80 cubic meter. The ball has an alert sound level which is not over 140 dB under international standard level.

Class C*: the fire that cannot use water to extinguish such as electric boards. Install above risk area, when ball touch the flame of fire ELIDE FIRE® will activate within 3 – 10 second Effective extinguish area 360˚ cover 1.80 cubic meter. When the ball activates, it has an alert sound level which is not over 140 dB under international standard level.

Andy

JAPAN

Cutting Abrasives

Epoxy

buyerIntroduction

Elide Fire Extinguishing Ball

elide fire extinguishing ball bola pemadam api extinguishers alat 灭火球 灭火器 艾利德火

elide-fire-extinguishing-ball

Backer rod, also called backer material or back-up rod, is a flexible foam  product used behind caulking to increase elasticity, reduce  consumption, force the caulking into contact with the sides of the joint  creating a better bond, determine the thickness of the caulking, and  define the cross-section hour-glass shape of the caulk. The backer rod  also acts as a bond breaker to keep the caulking from sticking to the  bottom of the opening called a three-sided bond; with the caulking only  adhering to the sides of the opening in an hour-glass shape it can flex  more easily and is less likely to tear. Backer rods can also be used to  reduce consumption of the caulking by filling part of the joints.

Backer rod is often round and rope-like in shape but many special  types and shaped such as square, rectangular and D-shapes are available.  High temperature backer rods are available. It is available in  different diameters and firmness, and in polyethylene and polyurethane  materials. Backer rod also comes in open-cell and closed-cell types of  foam.

Open-cell foam is porous so it will let gasses through which could  otherwise cause blistering of the sealant. Also, open-cell backer rod  allows air to get to the back side of the sealant which accelerates  curing when used with air-cured sealants such as silicone. Open-cell rod  is more compressible than closed-cell foam and should be 25% larger  diameter than the joint.

Closed-cell foam does not absorb water and is impermeable. Closed-cell rods are less compressible and should not  be compressed more than 25%. Closed-cell rod will also lose firmness  and out-gas if damaged during installation or overcompressed or at sharp  bends. The gasses cannot pass through this backer rod and can deform,  weaken, and even cause holes (leaks) in the sealant as it escapes.  Out-gassing is the reason open-cell backer rod was developed.

Color: Grey
Approval: Approved by HDB
Size and length: 10mm at 400m per box

Backer rod, also called backer material or back-up rod, is a flexible foam product used behind caulking to increase elasticity, reduce consumption, force the caulking into contact with the sides of the joint creating a better bond, determine the thickness of the caulking, and define the cross-section hour-glass shape of the caulk. The backer rod also acts as a bond breaker to keep the caulking from sticking to the bottom of the opening called a three-sided bond; with the caulking only adhering to the sides of the opening in an hour-glass shape it can flex more easily and is less likely to tear. Backer rods can also be used to reduce consumption of the caulking by filling part of the joints.Backer rod is often round and rope-like in shape but many special types and shaped such as square, rectangular and D-shapes are available. High temperature backer rods are available. It is available in different diameters and firmness, and in polyethylene and polyurethane materials. Backer rod also comes in open-cell and closed-cell types of foam.Open-cell foam is porous so it will let gasses through which could otherwise cause blistering of the sealant. Also, open-cell backer rod allows air to get to the back side of the sealant which accelerates curing when used with air-cured sealants such as silicone. Open-cell rod is more compressible than closed-cell foam and should be 25% larger diameter than the joint.Closed-cell foam does not absorb water and is impermeable. Closed-cell rods are less compressible and should not be compressed more than 25%. Closed-cell rod will also lose firmness and out-gas if damaged during installation or overcompressed or at sharp bends. The gasses cannot pass through this backer rod and can deform, weaken, and even cause holes (leaks) in the sealant as it escapes. Out-gassing is the reason open-cell backer rod was developed. Color: Grey Approval: Approved by HDB Size and length: 10mm at 400m per box

Backer rod, also called backer material or back-up rod, is a flexible foam product used behind caulking to increase elasticity, reduce consumption, force the caulking into contact with the sides of the joint creating a better bond, determine the thickness of the caulking, and define the cross-section hour-glass shape of the caulk. The backer rod also acts as a bond breaker to keep the caulking from sticking to the bottom of the opening called a three-sided bond; with the caulking only adhering to the sides of the opening in an hour-glass shape it can flex more easily and is less likely to tear. Backer rods can also be used to reduce consumption of the caulking by filling part of the joints.
Backer rod is often round and rope-like in shape but many special types and shaped such as square, rectangular and D-shapes are available. High temperature backer rods are available. It is available in different diameters and firmness, and in polyethylene and polyurethane materials. Backer rod also comes in open-cell and closed-cell types of foam.
Open-cell foam is porous so it will let gasses through which could otherwise cause blistering of the sealant. Also, open-cell backer rod allows air to get to the back side of the sealant which accelerates curing when used with air-cured sealants such as silicone. Open-cell rod is more compressible than closed-cell foam and should be 25% larger diameter than the joint.
Closed-cell foam does not absorb water and is impermeable. Closed-cell rods are less compressible and should not be compressed more than 25%. Closed-cell rod will also lose firmness and out-gas if damaged during installation or overcompressed or at sharp bends. The gasses cannot pass through this backer rod and can deform, weaken, and even cause holes (leaks) in the sealant as it escapes. Out-gassing is the reason open-cell backer rod was developed. 
 
Color: Grey 
Approval: Approved by HDB 
Size and length: 10mm at 400m per box

Others

Azfast Backer Rod (carton)

azfast backer rod (carton) (karton) building materials bahan bangunan (kadbod) binaan azfast/阿兹法斯特 靠背杆（纸箱） 建筑材料 阿兹法斯特

azfast-backer-rod-carton

10mm

20mm, 250M length

Size

Azfoam 750ml is a self-expanding , one component polyurethane foam use for filling cavities, break-throughs, crack and void, sealing, bonding, insulate , stop air infiltrate and deaden sound.

Azfoam 750ml is a self-expanding , one component polyurethane foam use for filling cavities, break-throughs, crack and void, sealing, bonding, insulate , stop air infiltrate and deaden sound.

Azfoam 750ml is a self-expanding , one component polyurethane foam use for filling cavities, break-throughs, crack and void, sealing, bonding, insulate , stop air infiltrate and deaden sound.

Expanding Foam 750ml

expanding foam 750ml busa ekspansi sealants sealant azfast mengembangkan buih pengedap azfast/阿兹法斯特 膨胀泡沫 密封胶 阿兹法斯特

expanding-foam-750ml

4" X-TEC fibre grinding disc for metals and stainless steel.

4&quot; X-TEC fibre grinding disc for metals and stainless steel.

4" X-TEC fibre grinding disc for metals and stainless steel.

Fibre Grinding Disc

fibre grinding disc fiber abrasives gerinda abrasif azfast pelelas mencanai azfast/阿兹法斯特 纤维磨盘 研磨磨料 阿兹法斯特

fibre-grinding-disc

9" TCT Saw Blade Wood

9" tct saw blade wood "tct cutting disc azfast kayu gergaji azfast/阿兹法斯特 9“ tct锯片木 阿兹法斯特

9-tct-saw-blade-wood

For 24 hrs. automatic fire surveillance firefighting.

To install for automatic fire surveillance firefighting,

automatically operates when touched the flame of fire.

Install the ball at the risky areas in houses, buildings and

high buildings where have small electric appliance such

as mobile chargers, UPS, computer, above electric kettle

ELIDE FIRE® extinguishing chemical certified by

European Standard EN615 which prove that do not

No maintenance cost is required for a period of 5 years

to save costs in households, governmental

For 24 hrs. automatic fire surveillance firefighting.To install for automatic fire surveillance firefighting,automatically operates when touched the flame of fire.Install the ball at the risky areas in houses, buildings andhigh buildings where have small electric appliance suchas mobile chargers, UPS, computer, above electric kettleand WIFI router.ELIDE FIRE® extinguishing chemical certified byEuropean Standard EN615 which prove that do notharmful to human and the environment.No maintenance cost is required for a period of 5 yearsto save costs in households, governmentaland private sectors.

For 24 hrs. automatic fire surveillance firefighting.
To install for automatic fire surveillance firefighting,
automatically operates when touched the flame of fire.
Install the ball at the risky areas in houses, buildings and
high buildings where have small electric appliance such
as mobile chargers, UPS, computer, above electric kettle
and WIFI router.
ELIDE FIRE® extinguishing chemical certified by
European Standard EN615 which prove that do not
harmful to human and the environment.
No maintenance cost is required for a period of 5 years
to save costs in households, governmental
and private sectors.

Elide Mini Fire Extinguishing Ball

elide mini fire extinguishing ball extinguishers pemadam api bola alat 迷你灭火球 灭火器 艾利德火

elide-mini-fire-extinguishing-ball

4" X-TEC fibre cutting disc for metals and stainless steel.

4&quot; X-TEC fibre cutting disc for metals and stainless steel.

4" X-TEC fibre cutting disc for metals and stainless steel.