AF Hydro

MJ Technos

Oleo Tecnica

RFS Hydraulics

RS Pro

Fasteners

fasteners

Bolts

bolts

Tube and Tubing

tube-and-tubing

Carbon Steel Tubes

carbon-steel-tubes

Plumbing & Sanitary

plumbing-sanitary

Flanges

flanges

Stainless Steel Tubes

stainless-steel-tubes

Mj Technos FL-SQ-H-SSAB-20 Ssab Type Complete Square Flange Set, 1 1/4" Socket Weld,carbon Steel Material, Working Pressure up to 210 kg/cm²  

This is a complete set SSAB square flange. Size availability between 1/2" to 3" with socket weld (weld-in) connection. This complete set square flanges are able to withstand maximum pressure up to 210 KGF/CM2 and are made to JIS F7806 standard. 

Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring. 

There are 4 types of square flange configurations;

· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts. 

· SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws. 

· KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB. 

· Blind square flange is used to terminate the end connection of a fluid flow.

1. Ensure the surface of the flanges are clean.

3. Next, position the flanges & the bolts correspondingly to the holes.

4. Tighten with a spanner for maximum tightness. 

<h3 class="md-block-header-three">Mj Technos FL-SQ-H-SSAB-20 Ssab Type Complete Square Flange Set, 1 1/4&quot; Socket Weld,carbon Steel Material, Working Pressure up to 210 kg/cm² </h3>This is a complete set SSAB square flange. Size availability between 1/2&quot; to 3&quot; with socket weld (weld-in) connection. This complete set square flanges are able to withstand maximum pressure up to 210 KGF/CM2 and are made to JIS F7806 standard. WHAT IS A SQUARE FLANGE?Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring. WHAT ARE THE AVAILABLE CONFIGURATIONS?There are 4 types of square flange configurations;· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts. · SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws. · KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB. · Blind square flange is used to terminate the end connection of a fluid flow.HOW DO I INSTALL SQUARE FLANGE?1. Ensure the surface of the flanges are clean.2. Lubricate the o-ring.3. Next, position the flanges &amp; the bolts correspondingly to the holes.4. Tighten with a spanner for maximum tightness.

<h3>Mj Technos FL-SQ-H-SSAB-20 Ssab Type Complete Square Flange Set, 1 1/4" Socket Weld,carbon Steel Material, Working Pressure up to 210 kg/cm²&nbsp;&nbsp;</h3>
This is a complete set SSAB square flange. Size availability between 1/2" to 3" with socket weld (weld-in) connection. This complete set square flanges are able to withstand maximum pressure up to 210 KGF/CM2 and are made to JIS F7806 standard.&nbsp;
WHAT IS A SQUARE FLANGE?
Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring.&nbsp;
WHAT ARE THE AVAILABLE CONFIGURATIONS?
There are 4 types of square flange configurations;
· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts.&nbsp;
· SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws.&nbsp;
· KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB.&nbsp;
· Blind square flange is used to terminate the end connection of a fluid flow.
HOW DO I INSTALL SQUARE FLANGE?
1. Ensure the surface of the flanges are clean.
2. Lubricate the o-ring.
3. Next, position the flanges &amp; the bolts correspondingly to the holes.
4. Tighten with a spanner for maximum tightness.&nbsp;

BOTHWELL

LAME

Stauff

Others

LY Metal

Pipe Clamps

Pipe Coupling

Ferrule Fittings

Pipe Adaptor

Pipe Elbow

Pipe Nipple

Pipe Tee

Camlock Fittings

Copper Tubing

Kelvin How

buyerIntroduction

Mj Technos FL-SQ-H-SSAB-20 Ssab Type Complete Square Flange Set, 1 1/4" Socket Weld,carbon Steel Material, Working Pressure up to 210 kg/cm²

mj technos fl-sq-h-ssab-20 ssab type complete square flange set, 1/4" socket weld,carbon steel material, working pressure 210 kg/cm² set persegi lengkap tipe fl-sq-h-ssab-20, las soket 1/4", bahan baja karbon, tekanan kerja hingga flanges bebibir jenis ssab, kimpalan keluli sehingga technos/mj 科技 型完整方形法兰套件，1 1/4 英寸承插焊，碳钢材料，工作压力高达

mj-technos-fl-sq-h-ssab-20-ssab-type-complete-square-flange-set-1-1-4-socket-weld-carbon-steel-material-working-pressure-up-to-210-kg-cm

Rfs FL-SQ-H-SHAB-20 Shab Type Complete Square Flange Set, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²  

This is a complete set SHAB square flange. Size availability between 1/4" to 6" with socket weld (weld-in) connection. This complete set square flanges are able to withstand maximum pressure up to 210 KGF/CM2 and are made to JIS F7806 standard. 

<h3 class="md-block-header-three">Rfs FL-SQ-H-SHAB-20 Shab Type Complete Square Flange Set, 1 1/4&quot; Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm² </h3>This is a complete set SHAB square flange. Size availability between 1/4&quot; to 6&quot; with socket weld (weld-in) connection. This complete set square flanges are able to withstand maximum pressure up to 210 KGF/CM2 and are made to JIS F7806 standard. WHAT IS A SQUARE FLANGE?Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring. WHAT ARE THE AVAILABLE CONFIGURATIONS?There are 4 types of square flange configurations;· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts. · SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws. · KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB. · Blind square flange is used to terminate the end connection of a fluid flow.HOW DO I INSTALL SQUARE FLANGE?1. Ensure the surface of the flanges are clean.2. Lubricate the o-ring.3. Next, position the flanges &amp; the bolts correspondingly to the holes.4. Tighten with a spanner for maximum tightness.

<h3>Rfs FL-SQ-H-SHAB-20 Shab Type Complete Square Flange Set, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²&nbsp;&nbsp;</h3>
This is a complete set SHAB square flange. Size availability between 1/4" to 6" with socket weld (weld-in) connection. This complete set square flanges are able to withstand maximum pressure up to 210 KGF/CM2 and are made to JIS F7806 standard.&nbsp;
WHAT IS A SQUARE FLANGE?
Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring.&nbsp;
WHAT ARE THE AVAILABLE CONFIGURATIONS?
There are 4 types of square flange configurations;
· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts.&nbsp;
· SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws.&nbsp;
· KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB.&nbsp;
· Blind square flange is used to terminate the end connection of a fluid flow.
HOW DO I INSTALL SQUARE FLANGE?
1. Ensure the surface of the flanges are clean.
2. Lubricate the o-ring.
3. Next, position the flanges &amp; the bolts correspondingly to the holes.
4. Tighten with a spanner for maximum tightness.&nbsp;

Rfs FL-SQ-H-SHAB-20 Shab Type Complete Square Flange Set, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²

rfs fl-sq-h-shab-20 shab type complete square flange set, 1/4" socket weld, carbon steel material, working pressure 210 kg/cm² set persegi lengkap tipe fl-sq-h-shab-20, las soket 1/4", bahan baja karbon, tekanan kerja hingga flanges hydraulics kimpalan soket, keluli sehingga hydraulics/rfs 液压 型完整方形法兰套件，1 1/4 英寸承插焊，碳钢材料，工作压力高达

rfs-fl-sq-h-shab-20-shab-type-complete-square-flange-set-1-1-4-socket-weld-carbon-steel-material-working-pressure-up-to-210-kg-cm

1. Made of Carbon Steel, Grade ST37.4/E235 or ST52.4/E355 and is conform to DIN2391 / DIN2445 standard. 

- ST52.4 is a high tensile strength tube, which means that it has higher permissible working pressures by reduced tube wall thickness, and leading to reduced system overall weight. 

2. Working Pressure for each material grade: 

3. Available Size: 4MM OD to 130MM OD or 1/4”OD to 2”OD

4. Tube Surface Finishing: NBK (Phosphate and Normalized), Oiled internally and externally which provides corrosion resistance. 

- Metals that have been through Normalized process are more formable, harder, and ductile as the metals will be heated at a high temperature, and it allowed to naturally cool back down to room temperature by exposure after heating. 

Hydraulic Tube is also known as Steel Tubes or ”Ermeto” Tubes. It is a cylinder-like shaped tubing device that allow for the passage of fluids within and among components when attach to hydraulic systems. Each of the tube come with standard length of 6 meters long. The tubes are made in Seamless and Cold Drawn process. Cold Drawn process provides the tube with close dimensional tolerances, increase material strength, and enhance machinability. Therefore, the tubes are suitable in high performance piping system application.

Step 1 : Cut the tube with a wheel cutter or mechanically. 

Step 2 : Bend the tube manually or by using a hydraulic tube bender. 

*A bending radius of 3x the external tube outer diameter is recommended for cold bending of 

*Ensure that you go through 3 processes when welding. The weld bevel process; choose the appropriate methods; check your handiwork after welding. 

Step 4 : The installation is done when both the hydraulic component and connected equipment has been installed.

Tips: It is recommended to use Pipe Clamps to reduce the tube vibration when fluid went through! 

About Hydraulic Tube1. Made of Carbon Steel, Grade ST37.4/E235 or ST52.4/E355 and is conform to DIN2391 / DIN2445 standard. - ST52.4 is a high tensile strength tube, which means that it has higher permissible working pressures by reduced tube wall thickness, and leading to reduced system overall weight. 2. Working Pressure for each material grade: - ST52.4 : 490N/mm² to 630N/mm²- ST37.4 : 340N/mm² to 480N/mm²3. Available Size: 4MM OD to 130MM OD or 1/4”OD to 2”OD4. Tube Surface Finishing: NBK (Phosphate and Normalized), Oiled internally and externally which provides corrosion resistance. - Metals that have been through Normalized process are more formable, harder, and ductile as the metals will be heated at a high temperature, and it allowed to naturally cool back down to room temperature by exposure after heating. What is Hydraulic Tube?Hydraulic Tube is also known as Steel Tubes or ”Ermeto” Tubes. It is a cylinder-like shaped tubing device that allow for the passage of fluids within and among components when attach to hydraulic systems. Each of the tube come with standard length of 6 meters long. The tubes are made in Seamless and Cold Drawn process. Cold Drawn process provides the tube with close dimensional tolerances, increase material strength, and enhance machinability. Therefore, the tubes are suitable in high performance piping system application.Hydraulic Tube installation guidelines: Step 1 : Cut the tube with a wheel cutter or mechanically. Step 2 : Bend the tube manually or by using a hydraulic tube bender. *A bending radius of 3x the external tube outer diameter is recommended for cold bending of Tube.Step 3 : Welding.*Ensure that you go through 3 processes when welding. The weld bevel process; choose the appropriate methods; check your handiwork after welding. Step 4 : The installation is done when both the hydraulic component and connected equipment has been installed.Tips: It is recommended to use Pipe Clamps to reduce the tube vibration when fluid went through!

About Hydraulic Tube
1. Made of Carbon Steel, Grade ST37.4/E235 or ST52.4/E355 and is conform to DIN2391 / DIN2445 standard.&nbsp;
- ST52.4 is a high tensile strength tube, which means that it has higher permissible working pressures by reduced tube wall thickness, and leading to reduced system overall weight. 
2. Working Pressure for each material grade:&nbsp;
- ST52.4 : 490N/mm² to 630N/mm²
- ST37.4 : 340N/mm² to 480N/mm²
3. Available Size: 4MM OD to 130MM OD or 1/4”OD to 2”OD
4. Tube Surface Finishing: NBK (Phosphate and Normalized), Oiled internally and externally which provides corrosion resistance.&nbsp;
- Metals that have been through Normalized process are more formable, harder, and ductile as the metals will be heated at a high temperature, and it allowed to naturally cool back down to room temperature by exposure after heating. 
What is Hydraulic Tube?
Hydraulic Tube is also known as Steel Tubes or ”Ermeto” Tubes. It is a cylinder-like shaped tubing device that allow for the passage of fluids within and among components when attach to hydraulic systems. Each of the tube come with standard length of 6 meters long. The tubes are made in Seamless and Cold Drawn process. Cold Drawn process provides the tube with close dimensional tolerances, increase material strength, and enhance machinability. Therefore, the tubes are suitable in high performance piping system application.
Hydraulic Tube installation guidelines: 
Step 1 : Cut the tube with a wheel cutter or mechanically.&nbsp;
Step 2 : Bend the tube manually or by using a hydraulic tube bender.&nbsp;
*A bending radius of 3x the external tube outer diameter is recommended for cold bending of 
Tube.
Step 3 : Welding.
*Ensure that you go through 3 processes when welding. The weld bevel process; choose the appropriate methods; check your handiwork after welding.&nbsp;
Step 4 : The installation is done when both the hydraulic component and connected equipment has been installed.
Tips: It is recommended to use Pipe Clamps to reduce the tube vibration when fluid went through!

Carbon Steel ST52.4/E355N Seamless Hydraulic Tube, 20mm Outer Diameter X 2mm Wall Thickness X 16mm Internal Diameter

carbon steel st52.4/e355n seamless hydraulic tube, 20mm outer diameter 2mm wall thickness 16mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st52-4-e355n-seamless-hydraulic-tube-20mm-outer-diameter-x-2mm-wall-thickness-x-16mm-internal-diameter

Carbon Steel ST52.4/E355N Seamless Hydraulic Tube, 20mm Outer Diameter X 3mm Wall Thickness X 14mm Internal Diameter

carbon steel st52.4/e355n seamless hydraulic tube, 20mm outer diameter 3mm wall thickness 14mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st52-4-e355n-seamless-hydraulic-tube-20mm-outer-diameter-x-3mm-wall-thickness-x-14mm-internal-diameter

Carbon Steel ST37.4/E235N Seamless Hydraulic Tube, 20mm Outer Diameter X 2mm Wall Thickness X 16mm Internal Diameter

carbon steel st37.4/e235n seamless hydraulic tube, 20mm outer diameter 2mm wall thickness 16mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st37-4-e235n-seamless-hydraulic-tube-20mm-outer-diameter-x-2mm-wall-thickness-x-16mm-internal-diameter

Carbon Steel ST52.4/E355N Seamless Hydraulic Tube, 20mm Outer Diameter X 2.5mm Wall Thickness X 15mm Internal Diameter

carbon steel st52.4/e355n seamless hydraulic tube, 20mm outer diameter 2.5mm wall thickness 15mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st52-4-e355n-seamless-hydraulic-tube-20mm-outer-diameter-x-2-5mm-wall-thickness-x-15mm-internal-diameter

Carbon Steel ST37.4/E235N Seamless Hydraulic Tube, 20mm Outer Diameter X 3mm Wall Thickness X 14mm Internal Diameter

carbon steel st37.4/e235n seamless hydraulic tube, 20mm outer diameter 3mm wall thickness 14mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st37-4-e235n-seamless-hydraulic-tube-20mm-outer-diameter-x-3mm-wall-thickness-x-14mm-internal-diameter

Rfs FL-SQ-H-SHA-O-20 Sha Type Square Flange O-Ring Side, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²  

This is a SHA o-ring side square flange. Size availability between 3/8" to 3" with socket weld (weld-in) connection. A complete set square flange is able to withstand maximum pressure up to 210 KGF/CM2 and is made to JIS F7806 standard. 

<h3 class="md-block-header-three">Rfs FL-SQ-H-SHA-O-20 Sha Type Square Flange O-Ring Side, 1 1/4&quot; Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm² </h3>This is a SHA o-ring side square flange. Size availability between 3/8&quot; to 3&quot; with socket weld (weld-in) connection. A complete set square flange is able to withstand maximum pressure up to 210 KGF/CM2 and is made to JIS F7806 standard. WHAT IS A SQUARE FLANGE?Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring. WHAT ARE THE AVAILABLE CONFIGURATIONS?There are 4 types of square flange configurations;· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts. · SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws. · KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB. · Blind square flange is used to terminate the end connection of a fluid flow.HOW DO I INSTALL SQUARE FLANGE?1. Ensure the surface of the flanges are clean.2. Lubricate the o-ring.3. Next, position the flanges &amp; the bolts correspondingly to the holes.4. Tighten with a spanner for maximum tightness.

<h3>Rfs FL-SQ-H-SHA-O-20 Sha Type Square Flange O-Ring Side, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²&nbsp;&nbsp;</h3>
This is a SHA o-ring side square flange. Size availability between 3/8" to 3" with socket weld (weld-in) connection. A complete set square flange is able to withstand maximum pressure up to 210 KGF/CM2 and is made to JIS F7806 standard.&nbsp;
WHAT IS A SQUARE FLANGE?
Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring.&nbsp;
WHAT ARE THE AVAILABLE CONFIGURATIONS?
There are 4 types of square flange configurations;
· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts.&nbsp;
· SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws.&nbsp;
· KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB.&nbsp;
· Blind square flange is used to terminate the end connection of a fluid flow.
HOW DO I INSTALL SQUARE FLANGE?
1. Ensure the surface of the flanges are clean.
2. Lubricate the o-ring.
3. Next, position the flanges &amp; the bolts correspondingly to the holes.
4. Tighten with a spanner for maximum tightness.&nbsp;

Rfs FL-SQ-H-SHA-O-20 Sha Type Square Flange O-Ring Side, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²

rfs fl-sq-h-sha-o-20 sha type square flange o-ring side, 1/4" socket weld, carbon steel material, working pressure 210 kg/cm² bahan baja karbon, tekanan kerja hingga flanges hydraulics jenis bebibir persegi sisi, kimpalan soket 1/4", keluli sehingga hydraulics/rfs 液压 型方形法兰 型圈侧，1 1/4 英寸承插焊，碳钢材料，工作压力高达

rfs-fl-sq-h-sha-o-20-sha-type-square-flange-o-ring-side-1-1-4-socket-weld-carbon-steel-material-working-pressure-up-to-210-kg-cm

Carbon Steel ST37.4/E235N Seamless Hydraulic Tube, 20mm Outer Diameter X 4mm Wall Thickness X 12mm Internal Diameter

carbon steel st37.4/e235n seamless hydraulic tube, 20mm outer diameter 4mm wall thickness 12mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st37-4-e235n-seamless-hydraulic-tube-20mm-outer-diameter-x-4mm-wall-thickness-x-12mm-internal-diameter

Carbon Steel ST37.4/E235N Seamless Hydraulic Tube, 20mm Outer Diameter X 2.5mm Wall Thickness X 15mm Internal Diameter

carbon steel st37.4/e235n seamless hydraulic tube, 20mm outer diameter 2.5mm wall thickness 15mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st37-4-e235n-seamless-hydraulic-tube-20mm-outer-diameter-x-2-5mm-wall-thickness-x-15mm-internal-diameter

Carbon Steel ST37.4/E235N Seamless Hydraulic Tube, 20mm Outer Diameter X 5mm Wall Thickness X 10mm Internal Diameter

carbon steel st37.4/e235n seamless hydraulic tube, 20mm outer diameter 5mm wall thickness 10mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st37-4-e235n-seamless-hydraulic-tube-20mm-outer-diameter-x-5mm-wall-thickness-x-10mm-internal-diameter

Carbon Steel ST37.4/E235N Seamless Hydraulic Tube, 20mm Outer Diameter X 3.5mm Wall Thickness X 13mm Internal Diameter

carbon steel st37.4/e235n seamless hydraulic tube, 20mm outer diameter 3.5mm wall thickness 13mm internal baja karbon tabung hidrolik mulus, luar tebal dinding tubes af hydro keluli tiub hidraulik lancar, dalaman 碳钢 无缝液压管，20mm 外径 壁厚 内径 af水电

carbon-steel-st37-4-e235n-seamless-hydraulic-tube-20mm-outer-diameter-x-3-5mm-wall-thickness-x-13mm-internal-diameter

Mj Technos FL-SQ-H-SHAB-BL-O-20 Sha Type Blind Square Flange Oring Side, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²  

<h3 class="md-block-header-three">Mj Technos FL-SQ-H-SHAB-BL-O-20 Sha Type Blind Square Flange Oring Side, 1 1/4&quot; Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm² </h3>This is a SHA o-ring side square flange. Size availability between 3/8&quot; to 3&quot; with socket weld (weld-in) connection. A complete set square flange is able to withstand maximum pressure up to 210 KGF/CM2 and is made to JIS F7806 standard. WHAT IS A SQUARE FLANGE?Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring. WHAT ARE THE AVAILABLE CONFIGURATIONS?There are 4 types of square flange configurations;· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts. · SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws. · KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB. · Blind square flange is used to terminate the end connection of a fluid flow.HOW DO I INSTALL SQUARE FLANGE?1. Ensure the surface of the flanges are clean.2. Lubricate the o-ring.3. Next, position the flanges &amp; the bolts correspondingly to the holes.4. Tighten with a spanner for maximum tightness.

<h3>Mj Technos FL-SQ-H-SHAB-BL-O-20 Sha Type Blind Square Flange Oring Side, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²&nbsp;&nbsp;</h3>
This is a SHA o-ring side square flange. Size availability between 3/8" to 3" with socket weld (weld-in) connection. A complete set square flange is able to withstand maximum pressure up to 210 KGF/CM2 and is made to JIS F7806 standard.&nbsp;
WHAT IS A SQUARE FLANGE?
Square flange is used to connect to a plain end pipes or component, allowing a seamless flow of liquid throughout the hydraulic system. It is commonly used in high-pressure connections with small diameter pipes. To create a strong leak proof connection, welding will be done at the recessed part of the flange. A complete set of square flange has 4 components. One flat flange, one O-ring flange, 4 pieces of hexagon or Allen cap screws, and 1 piece of NBR O-ring.&nbsp;
WHAT ARE THE AVAILABLE CONFIGURATIONS?
There are 4 types of square flange configurations;
· SHAB is commonly used in the hydraulic industry with a maximum working pressure of 210kg/cm². It is installed with hexagon bolts.&nbsp;
· SSAB has a smaller body than SHAB. It also has a maximum working pressure of 210kg/cm² and it is installed using Allan cap screws.&nbsp;
· KAB flanges are able to withstand higher working pressure up to 280kg/cm² or 350kg/cm², depending on the type. It has a similar configuration method as SHAB.&nbsp;
· Blind square flange is used to terminate the end connection of a fluid flow.
HOW DO I INSTALL SQUARE FLANGE?
1. Ensure the surface of the flanges are clean.
2. Lubricate the o-ring.
3. Next, position the flanges &amp; the bolts correspondingly to the holes.
4. Tighten with a spanner for maximum tightness.&nbsp;

Mj Technos FL-SQ-H-SHAB-BL-O-20 Sha Type Blind Square Flange Oring Side, 1 1/4" Socket Weld, Carbon Steel Material, Working Pressure up to 210 kg/cm²

mj technos fl-sq-h-shab-bl-o-20 sha type blind square flange oring side, 1/4" socket weld, carbon steel material, working pressure 210 kg/cm² bahan baja karbon, tekanan kerja hingga flanges kimpalan soket 1/4", keluli sehingga technos/mj 科技 型盲方形法兰 形圈侧，1 1/4 英寸承插焊，碳钢材料，工作压力高达

mj-technos-fl-sq-h-shab-bl-o-20-sha-type-blind-square-flange-oring-side-1-1-4-socket-weld-carbon-steel-material-working-pressure-up-to-210-kg-cm

Material: Carbon Steel Grade 8.8 Blue Zinc

<ul class="md-block-unordered-list-item"><li>Specification:</li><li>Brand: Others</li><li>Product Type: Hexagon Bolt</li><li>Material: Carbon Steel Grade 8.8 Blue Zinc</li><li>Thread Size: M8</li><li>Length (l): 30 mm</li><li>Pitch: 1.25</li><li>Reference Standard: DIN 933</li><li>d1: 6.8 mm</li><li>s: 13 mm</li><li>k (max): 5.45 mm</li><li>e: 14.38 mm</li><li>b: -</li><li>Quantity per Package: 20 Pieces</li></ul>

<ul>
<li>Specification:</li>
<li>Brand: Others</li>
<li>Product Type: Hexagon Bolt</li>
<li>Material: Carbon Steel Grade 8.8 Blue Zinc</li>
<li>Thread Size: M8</li>
<li>Length (l): 30 mm</li>
<li>Pitch: 1.25</li>
<li>Reference Standard: DIN 933</li>
<li>d1: 6.8 mm</li>
<li>s: 13 mm</li>
<li>k (max): 5.45 mm</li>
<li>e: 14.38 mm</li>
<li>b: -</li>
<li>Quantity per Package: 20 Pieces</li>
</ul>

Leland

M8 X 30mm Hexagon Bolt DIN933 Carbon Steel 8.8 Blue Zinc, 20 Pcs Per Pack

m8 30mm hexagon bolt din933 carbon steel 8.8 blue zinc, 20 pcs per pack baut baja karbon seng biru, pak bolts oem heksagon keluli zink keping setiap pek oem/oem代工 六角螺栓 碳钢 蓝锌，每包 oem代工

m8-x-30mm-hexagon-bolt-din933-carbon-steel-8-8-blue-zinc-20-pcs-per-pack

Oleo Tecnica Carbon Steel, 4-bolt Flange w/ Nbr O-ring, Sae J518

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 2 Butt Weld SCH80 O-ring Side, 4-bolt Flange w/ Nbr O-ring, Sae J518

<h3 class="md-block-header-three">Oleo Tecnica Carbon Steel, 4-bolt Flange w/ Nbr O-ring, Sae J518</h3>Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 2 Butt Weld SCH80 O-ring Side, 4-bolt Flange w/ Nbr O-ring, Sae J518 Technical Spec<ul class="md-block-unordered-list-item"><li>Netto Weight 1.5 KG</li><li>Unit Dimension 9 X 4.5 X 10.2 CM</li><li>Height Dimension 10.200</li><li>Length Dimension 9.000</li><li>Width Dimension 4.500</li><li>Dimension uom 9.000</li></ul>

<h3>Oleo Tecnica Carbon Steel, 4-bolt Flange w/ Nbr O-ring, Sae J518</h3>
Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 2 Butt Weld SCH80 O-ring Side, 4-bolt Flange w/ Nbr O-ring, Sae J518
&nbsp;Technical Spec
<ul>
<li>Netto Weight 1.5 KG</li>
<li>Unit Dimension 9 X 4.5 X 10.2 CM</li>
<li>Height Dimension 10.200</li>
<li>Length Dimension 9.000</li>
<li>Width Dimension 4.500</li>
<li>Dimension uom 9.000</li>
</ul>

Sch80 o-ring side technical data sheet

Oleo Tecnica Carbon Steel ST52.3 Sae Flange Code 61 3000 Psi, 2" Butt Weld SCH80 O-ring Side, 4-bolt Flange w/ Nbr O-ring, Sae J518

oleo tecnica carbon steel st52.3 sae flange code 61 3000 psi, 2" butt weld sch80 o-ring side, 4-bolt w/ nbr o-ring, j518 4-baut dengan sae-h-it-bw-3-o-20-61-49 flanges tecnica/oleo 机械油 碳钢 螺栓法兰，带 形圈