FORCE

RFS Hydraulics

Spanners & Sockets

spanners-sockets

Open End Spanners

open-end-spanners

Plumbing & Sanitary

plumbing-sanitary

Pipe Adaptor

pipe-adaptor

Pipe Wrenches

pipe-wrenches

Socket Sets

socket-sets

Spanner Sets

spanner-sets

M10 005-127-1011 10 X 11 Mm Dble 6PT Flex Flare Nut Wr

Made of chrome-vanadium steel, mirror polish finish 

<h3 class="md-block-header-three"><strong class="md-inline-bold">M10 005-127-1011 10 X 11 Mm Dble 6PT Flex Flare Nut Wr</strong></h3><p class="md-block-unstyled">Made of chrome-vanadium steel, mirror polish finish </p><p class="md-block-unstyled">Size: 10 x 11 mm <br/>Length: 154 mm</p>

<h3><strong>M10 005-127-1011 10 X 11 Mm Dble 6PT Flex Flare Nut Wr</strong></h3>
<p>Made of chrome-vanadium steel, mirror polish finish&nbsp;</p>
<p>Size: 10 x 11 mm <br>
Length: 154 mm</p>


Wing Poh Hardware

BONDHUS

HOZELOCK

KNIPEX PLIERS

SABOTEN GARDEN TOOLS

SUNFLAG

KTC KYOTO TOOL

TAJIMA TOOLS

GEARWRENCH

WERA TOOLS

Sockets

Combination Spanners

Ring Spanners

Impact Sockets

Hole Saws

Drill Bits & Drill Bit Sets

Screwdrivers

Hex Keys & Sets

Garden Watering System

Sales

buyerIntroduction

m10 005-127-1011 10 11mm dble 6pt flex flare nut wr open end spanners kunci pas ujung terbuka nat suar fleksibel sepana hujung 毫米双 柔性喇叭口螺母 开口扳手

m10-005-127-1011-10-x-11-mm-dble-6pt-flex-flare-nut-wr

M10 005-066-1011 10 X 11 Double Open End Wr 

Chrome-vanadium steel, raised panel handle, matt finish  

<h3 class="md-block-header-three"><strong class="md-inline-bold">M10 005-066-1011 10 X 11 Double Open End Wr</strong> </h3><ul class="md-block-unordered-list-item"><li>Chrome-vanadium steel, raised panel handle, matt finish  </li><li>ANSI standard </li><li>Size (mm): 10 x 11 </li><li>Length (mm): 126</li></ul>

<h3><strong>M10 005-066-1011 10 X 11 Double Open End Wr</strong>&nbsp;</h3>
<ul>
<li>Chrome-vanadium steel, raised panel handle, matt finish&nbsp;&nbsp;</li>
<li>ANSI standard&nbsp;</li>
<li>Size (mm): 10 x 11&nbsp;</li>
<li>Length (mm): 126</li>
</ul>


M10 005-066-1011 10 X 11 Double Open End Wr

m10 005-066-1011 10 11 double open end wr ujung terbuka ganda spanners kunci pas sepana hujung 双开口端 开口扳手

m10-005-066-1011-10-x-11-double-open-end-wr

M10 005-065-911 11MM L-WRENCH (angle Pipe Wr) 

Made of high grade chrome vanadium steel. 6140, Mirror Finish. 

Length (mm) Handle x Angle Pipe: 127 x 30 

<h3 class="md-block-header-three"><strong class="md-inline-bold">M10 005-065-911 11MM L-WRENCH (angle Pipe Wr)</strong> </h3><ul class="md-block-unordered-list-item"><li>Made of high grade chrome vanadium steel. 6140, Mirror Finish. </li><li>Size (mm) (6pt x 6pt): 11</li><li>Length (mm) Handle x Angle Pipe: 127 x 30 </li><li>Diameter(mm):  16.0 </li></ul>

<h3><strong>M10 005-065-911 11MM L-WRENCH (angle Pipe Wr)</strong>&nbsp;</h3>
<ul>
<li>Made of high grade chrome vanadium steel. 6140, Mirror Finish.&nbsp;</li>
<li>Size (mm) (6pt x 6pt): 11</li>
<li>Length (mm) Handle x Angle Pipe: 127 x 30&nbsp;</li>
<li>Diameter(mm):  16.0&nbsp;</li>
</ul>


M10 005-065-911 11MM L-WRENCH (angle Pipe Wr)

m10 005-065-911 11mm l-wrench (angle pipe wr) (pipa sudut wrenches kunci pas pipa l-setengah (sudut paip sepana 型扳手 (角管扳手) 管钳

m10-005-065-911-11mm-l-wrench-angle-pipe-wr

M10 005-069-11 OP11 11PC Double Open Wr Set

 11 pcs (in bag)  6x7, 8x9, 10x11, 12x13, 14x15, 16x18,  17 x19, 21x23, 22x24, 27x30, 30x32  (mm) 

<h3 class="md-block-header-three"><strong class="md-inline-bold">M10 005-069-11 OP11 11PC Double Open Wr Set</strong></h3><p class="md-block-unstyled"> 11 pcs (in bag)  6x7, 8x9, 10x11, 12x13, 14x15, 16x18,  17 x19, 21x23, 22x24, 27x30, 30x32  (mm) </p>

<h3><strong>M10 005-069-11 OP11 11PC Double Open Wr Set</strong></h3>
<p>&nbsp;11 pcs (in bag)  6x7, 8x9, 10x11, 12x13, 14x15, 16x18,  17 x19, 21x23, 22x24, 27x30, 30x32  (mm)&nbsp;</p>


m10 005-069-11 op11 11pc double open wr set terbuka ganda spanner sets kunci pas spanar 11件双开水壶套装 扳手组

m10-005-069-11-op11-11pc-double-open-wr-set

Force 4622-4 1/2"DR. Socket, L Key and Wrench Combination Set

1/2'' 6-sided sockets 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 27 - 30 - 32mm

1/2'' 6-sided spark plug socket 16 - 20.6mm

1/2'' Ratchet 24 teeth thin-walled (80244)

Adapter for extension 3/8''DR. x 1/2''(M)

Open ring keys 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24mm

Angled torx keys extra long T10 - T15 - T20 - T25 - T27 - T30 - T40 - T45 - T50 (5098XL)

Angled ball hex keys extra long 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 7 - 8 - 10 - 12mm (5116XLB)

<h3 class="md-block-header-three"><strong class="md-inline-bold">Force 4622-4 1/2&quot;DR. Socket, L Key and Wrench Combination Set</strong></h3><ul class="md-block-unordered-list-item"><li>1/2&#x27;&#x27; Socket set</li><li>6 Lace caps</li><li>10 to 32mm</li></ul><p class="md-block-unstyled">Contents:</p><ul class="md-block-unordered-list-item"><li>1/2&#x27;&#x27; 6-sided sockets 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 27 - 30 - 32mm</li><li>1/2&#x27;&#x27; 6-sided spark plug socket 16 - 20.6mm</li><li>1/2&#x27;&#x27; Ratchet 24 teeth thin-walled (80244)</li><li>1/2&#x27;&#x27; Extensions 125 - 250mmL</li><li>1/2&#x27;&#x27; Knee joint</li><li>Adapter for extension 3/8&#x27;&#x27;DR. x 1/2&#x27;&#x27;(M)</li><li>Open ring keys 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24mm</li><li>Angled torx keys extra long T10 - T15 - T20 - T25 - T27 - T30 - T40 - T45 - T50 (5098XL)</li><li>Angled ball hex keys extra long 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 7 - 8 - 10 - 12mm (5116XLB)</li></ul>

<h3><strong>Force 4622-4 1/2"DR. Socket, L Key and Wrench Combination Set</strong></h3>
<ul>
<li>1/2'' Socket set</li>
<li>6 Lace caps</li>
<li>10 to 32mm</li>
</ul>
<p>Contents:</p>
<ul>
<li>1/2'' 6-sided sockets 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 27 - 30 - 32mm</li>
<li>1/2'' 6-sided spark plug socket 16 - 20.6mm</li>
<li>1/2'' Ratchet 24 teeth thin-walled (80244)</li>
<li>1/2'' Extensions 125 - 250mmL</li>
<li>1/2'' Knee joint</li>
<li>Adapter for extension 3/8''DR. x 1/2''(M)</li>
<li>Open ring keys 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 24mm</li>
<li>Angled torx keys extra long T10 - T15 - T20 - T25 - T27 - T30 - T40 - T45 - T50 (5098XL)</li>
<li>Angled ball hex keys extra long 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 7 - 8 - 10 - 12mm (5116XLB)</li>
</ul>


ELORA

Screwdriver Bits & Bit Set

Hammers & Mallets

Mr Jones Ong

force 4622-4 1/2"dr. socket, key wrench combination set soket, kombinasi kunci dan pas socket sets soket gabungan sepana force/力量 套筒、l 型扳手和扳手组合套装 套筒组 力量

force-4622-4-1-2-dr-socket-l-key-and-wrench-combination-set

Rfs Brass 25mm Od X 3/4" Male Bspt Connector Compression Fittings F-D-BM-MM-MC-T-25-12

Compression fittings are commonly used in applications that requires excellent sealing in high temperature and pressure setting. These fittings are also known as single ferrule. They have a simpler design than double ferrules. Compression fittings are made to DIN 2353, ISO 8434-1, and DIN EN 3851 standards. These fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs. S series (high pressure) fitting has a working pressure of 315 to 630 bars, while L series (light pressure) fitting has a working pressure between 160 to 315 bars. The lowest pressure (LL) series is 100 bars. Compression fittings can be assembled and reassembled many times. Fittings vary in design but they are all made up of three parts; Body, nut, and sleeve. The benefits offered by compression fitting are fewer leak paths, dampens vibration, flexibility, and ease of installation.  To install a compression fitting, place the ring and nut over the tube. Then, use a pre-assembly tool and insert the tube up to tube abutment and tighten it with 1 1/4 turns. Remove the pre-assembly tool and untighten it. Remove the nut to see if there is any visible ring formed over the tube. Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in increase of torque and further tighten the nut ¼ turn. Single ferrule male connector connects male and female tubes together. It has one threaded male end, and one compression end.

Series	: L (Light Series) & S (Heavy Series)

Working Pressure (bar)	: L series (160-315) & S series (315-800)

Material Standard	: DIN 2353 / DIN EN 3851 / ISO 8434-1

Step 1: Cutting ring and nut to be placed over the tube in the correct direction.

Step 2: Insert tube into pre-assembly tool up to tube abutment and tighten with the nut.

Step 3: Tighten 1 ¼ turns beyond the hand tighten position by using a wrench.

Step 4: Take out the pre-assembly and untighten and remove the nut to check the ring formed up over the tube. The visible ring is formed up with the penetration of the cutting ring into the tube surface.

Step 5: With fitting body holding up, use a wrench to tighten the nut until a noticeable increase in torque in felt. Beyond this point tighten the nut ¼ turn for last round of assembly.

<h3 class="md-block-header-three"><strong class="md-inline-bold">Rfs Brass 25mm Od X 3/4&quot; Male Bspt Connector Compression Fittings F-D-BM-MM-MC-T-25-12</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Male Connector (BSPP, BSPT &amp; NPT)</strong></p><p class="md-block-unstyled">Compression fittings are commonly used in applications that requires excellent sealing in high temperature and pressure setting. These fittings are also known as single ferrule. They have a simpler design than double ferrules. Compression fittings are made to DIN 2353, ISO 8434-1, and DIN EN 3851 standards. These fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs. S series (high pressure) fitting has a working pressure of 315 to 630 bars, while L series (light pressure) fitting has a working pressure between 160 to 315 bars. The lowest pressure (LL) series is 100 bars. Compression fittings can be assembled and reassembled many times. Fittings vary in design but they are all made up of three parts; Body, nut, and sleeve. The benefits offered by compression fitting are fewer leak paths, dampens vibration, flexibility, and ease of installation.  To install a compression fitting, place the ring and nut over the tube. Then, use a pre-assembly tool and insert the tube up to tube abutment and tighten it with 1 1/4 turns. Remove the pre-assembly tool and untighten it. Remove the nut to see if there is any visible ring formed over the tube. Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in increase of torque and further tighten the nut ¼ turn. Single ferrule male connector connects male and female tubes together. It has one threaded male end, and one compression end.</p><p class="md-block-unstyled"><strong class="md-inline-bold">About Male Connector</strong></p><p class="md-block-unstyled">Size	: 6mm to 42mm &amp; 1/8” to 1 1/2”</p><p class="md-block-unstyled">Series	: L (Light Series) &amp; S (Heavy Series)</p><p class="md-block-unstyled">Working Pressure (bar)	: L series (160-315) &amp; S series (315-800)</p><p class="md-block-unstyled">Material	: Brass</p><p class="md-block-unstyled">Material Standard	: DIN 2353 / DIN EN 3851 / ISO 8434-1</p><p class="md-block-unstyled">Connection type	: NPT / BSPP / BSPT</p><p class="md-block-unstyled"><strong class="md-inline-bold">DIN Fittings installation guidelines:</strong></p><p class="md-block-unstyled">Step 1: Cutting ring and nut to be placed over the tube in the correct direction.</p><p class="md-block-unstyled">Step 2: Insert tube into pre-assembly tool up to tube abutment and tighten with the nut.</p><p class="md-block-unstyled">Step 3: Tighten 1 ¼ turns beyond the hand tighten position by using a wrench.</p><p class="md-block-unstyled">Step 4: Take out the pre-assembly and untighten and remove the nut to check the ring formed up over the tube. The visible ring is formed up with the penetration of the cutting ring into the tube surface.</p><p class="md-block-unstyled">Step 5: With fitting body holding up, use a wrench to tighten the nut until a noticeable increase in torque in felt. Beyond this point tighten the nut ¼ turn for last round of assembly.</p>

<h3><strong>Rfs Brass 25mm Od X 3/4" Male Bspt Connector Compression Fittings F-D-BM-MM-MC-T-25-12</strong></h3>
<p><strong>Male Connector (BSPP, BSPT &amp; NPT)</strong></p>
<p>Compression fittings are commonly used in applications that requires excellent sealing in high temperature and pressure setting. These fittings are also known as single ferrule. They have a simpler design than double ferrules. Compression fittings are made to DIN 2353, ISO 8434-1, and DIN EN 3851 standards. These fittings are available in 3 series; S, L, and LL. Each series is made to suit different pressure needs. S series (high pressure) fitting has a working pressure of 315 to 630 bars, while L series (light pressure) fitting has a working pressure between 160 to 315 bars. The lowest pressure (LL) series is 100 bars. Compression fittings can be assembled and reassembled many times. Fittings vary in design but they are all made up of three parts; Body, nut, and sleeve. The benefits offered by compression fitting are fewer leak paths, dampens vibration, flexibility, and ease of installation.  To install a compression fitting, place the ring and nut over the tube. Then, use a pre-assembly tool and insert the tube up to tube abutment and tighten it with 1 1/4 turns. Remove the pre-assembly tool and untighten it. Remove the nut to see if there is any visible ring formed over the tube. Use a wrench to tighten the nut with the fitting body in an upward position until there is a noticeable feeling in increase of torque and further tighten the nut ¼ turn. Single ferrule male connector connects male and female tubes together. It has one threaded male end, and one compression end.</p>
<p><strong>About Male Connector</strong></p>
<p>Size	: 6mm to 42mm &amp; 1/8” to 1 1/2”</p>
<p>Series	: L (Light Series) &amp; S (Heavy Series)</p>
<p>Working Pressure (bar)	: L series (160-315) &amp; S series (315-800)</p>
<p>Material	: Brass</p>
<p>Material Standard	: DIN 2353 / DIN EN 3851 / ISO 8434-1</p>
<p>Connection type	: NPT / BSPP / BSPT</p>
<p><strong>DIN Fittings installation guidelines:</strong></p>
<p>Step 1: Cutting ring and nut to be placed over the tube in the correct direction.</p>
<p>Step 2: Insert tube into pre-assembly tool up to tube abutment and tighten with the nut.</p>
<p>Step 3: Tighten 1 ¼ turns beyond the hand tighten position by using a wrench.</p>
<p>Step 4: Take out the pre-assembly and untighten and remove the nut to check the ring formed up over the tube. The visible ring is formed up with the penetration of the cutting ring into the tube surface.</p>
<p>Step 5: With fitting body holding up, use a wrench to tighten the nut until a noticeable increase in torque in felt. Beyond this point tighten the nut ¼ turn for last round of assembly.</p>


AF Hydro

Oleo Tecnica

BOTHWELL

LAME

Stauff

Others

MJ Technos

LY Metal

Flanges

Pipe Clamps

Pipe Coupling

Ferrule Fittings

Pipe Elbow

Pipe Nipple

Pipe Tee

Camlock Fittings

Copper Tubing

Kelvin How

Rfs Brass 25mm Od X 3/4" Male Bspt Connector Compression Fittings

rfs brass 25mm od 3/4" male bspt connector compression fittings 3/4 "male f-d-bm-mm-mc-t-25-12 pipe adaptor pipa hydraulics loyang kelengkapan mampatan penyambung lelaki penyesuai paip hydraulics/rfs 液压 黄铜 外螺纹 连接器压缩接头