Iwata

SCHNEIDER ELECTRIC

Industrial Automation and Control

industrial-automation-and-control

Inverter Drives

inverter-drives

IT & Electronics

it-electronics

IT Accessories

it-accessories

Circuit Breakers

circuit-breakers

Molded Case Circuit Breakers - MCCBs

molded-case-circuit-breakers-mccbs

Mechanical Parts

mechanical-parts

O Ring

o-ring

RS Pro

Screw

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

Schneider Electric C40F34V400 Compact Mccb 3P 400A, Fixed Mount

schneider electric c40f34v400 compact mccb 3p 400a, fixed mount pemasangan tetap molded case circuit breakers mccbs lekapan electric/施耐德电气 紧凑型 400a，固定安装 施耐德电气

schneider-electric-c40f34v400-compact-mccb-3p-400a-fixed-mount

Schneider Electric C40N34V400 Compact Mccb 3P 400A, Fixed Mount

schneider electric c40n34v400 compact mccb 3p 400a, fixed mount pemasangan tetap molded case circuit breakers mccbs lekapan electric/施耐德电气 紧凑型 400a，固定安装 施耐德电气

schneider-electric-c40n34v400-compact-mccb-3p-400a-fixed-mount

Schneider Electric C40H34V400 Compact Mccb 3P 400A, Fixed Mount

schneider electric c40h34v400 compact mccb 3p 400a, fixed mount pemasangan tetap molded case circuit breakers mccbs lekapan electric/施耐德电气 紧凑型 400a，固定安装 施耐德电气

schneider-electric-c40h34v400-compact-mccb-3p-400a-fixed-mount

Material :  Viton Fluoroelastomers (FKM) 75 Shore    

ORING AS568 AS400 ID 34.29 X CS 6.99Material : Viton Fluoroelastomers (FKM) 75 Shore

ORING AS568 AS400
&nbsp;ID 34.29 X CS 6.99
Material : Viton Fluoroelastomers (FKM) 75 Shore&nbsp;&nbsp;&nbsp;&nbsp;

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING AS568 AS400 ID 34.29 X CS 6.99 Viton Fluoroelastomers (FKM) 75 Shore

oring as568 as400 id 34.29 x cs 6.99 viton fluoroelastomers (fkm) 75 shore fluoroelastomer o ring o-ring oem gelang oem/oem代工 6.99氟橡胶（fkm）75肖氏 o型圈 oem代工

oring-as568-as400-id-34-29-x-cs-6-99-viton-fluoroelastomers-fkm-75-shore

Mateal : Ethylene Propylene Diene Monomer (EPDM) 70 Shore    

ORING AS568 AS400 ID 34.29 X CS 6.99Mateal : Ethylene Propylene Diene Monomer (EPDM) 70 Shore

ORING AS568 AS400
&nbsp;ID 34.29 X CS 6.99
Mateal : Ethylene Propylene Diene Monomer (EPDM) 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;

ORING AS568 AS400 ID 34.29 X CS 6.99 Ethylene Propylene Diene Monomer (EPDM) 70 Shore

oring as568 as400 id 34.29 x cs 6.99 ethylene propylene diene monomer (epdm) 70 shore o ring o-ring oem gelang oem/oem代工 6.99乙烯丙烯二烯单体（epdm）70肖氏 o型圈 oem代工

oring-as568-as400-id-34-29-x-cs-6-99-ethylene-propylene-diene-monomer-epdm-70-shore

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS400 ID 34.29 X CS 6.99Material : Silicone 70 Shore Additional InformationSilicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/FGpcBkygD8DeGbiSSBTQ76.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS400
&nbsp;ID 34.29 X CS 6.99
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:2h82m"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/FGpcBkygD8DeGbiSSBTQ76.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2h82m" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS400 ID 34.29 X CS 6.99 Silicone 70 Shore

oring as568 as400 id 34.29 x cs 6.99 silicone 70 shore 34,29 silikon o ring o-ring oem gelang oem/oem代工 6.99硅胶70肖氏 o型圈 oem代工

oring-as568-as400-id-34-29-x-cs-6-99-silicone-70-shore

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

ORING AS568 AS400 ID 34.29 X CS 6.99Material : Nitrile (NBR) 90 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/bcgoO7cJcDxe559OzMifNv.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS400
&nbsp;ID 34.29 X CS 6.99
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cnjhq"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/bcgoO7cJcDxe559OzMifNv.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cnjhq" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS400 ID 34.29 X CS 6.99 Nitrile (NBR) 90 Shore

oring as568 as400 id 34.29 x cs 6.99 nitrile (nbr) 90 shore 34,29 o ring o-ring oem gelang oem/oem代工 6.99丁腈（nbr）90肖氏 o型圈 oem代工

oring-as568-as400-id-34-29-x-cs-6-99-nitrile-nbr-90-shore

Button Switch

Schneider Electric ATV212WD18N4 Inverter Drive, 18.5 Kw, 3 Phase, 400 V, 34.9 A, Altivar 212 Series

schneider electric atv212wd18n4 inverter drive, 18.5 kw, phase, 400 v, 34.9 a, altivar 212 series penggerak atv212wd18n4, 18,5 fase, 34,9 seri drives pemacu penyongsang electric, fasa, electric/施耐德电气 变频器，18.5 kw，3 相，400 v，34.9 a，altivar 系列 施耐德电气

schneider-electric-atv212wd18n4-inverter-drive-18-5-kw-3-phase-400-v-34-9-a-altivar-212-series

Schneider Electric ATV212HD18N4 Inverter Drive, 18.5 Kw, 3 Phase, 400 V Ac, 34.8 A, Atv 212 Series

schneider electric atv212hd18n4 inverter drive, 18.5 kw, phase, 400 ac, 34.8 a, atv 212 series penggerak atv212hd18n4, 18,5 fasa, 34,8 seri drives pemacu penyongsang electric, siri electric/施耐德电气 逆变器驱动器，18.5 kw，3 相，400 交流，34.8 a，atv 系列 施耐德电气

schneider-electric-atv212hd18n4-inverter-drive-18-5-kw-3-phase-400-v-ac-34-8-a-atv-212-series

Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series

Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction

Sensors can be mounted in various directions by tapping four locations

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Brackets for mounting photo microsensors</li><li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li><li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li><li>Sensors can be mounted in various directions by tapping four locations</li><li>Material Stainless steel (SUS304)</li><li>Sensor mounting screws are included</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: L-V Type Bracket</li><li>Material: Stainless Steel SUS304</li><li>Reference Dimension 1 - A1: 44.8 mm</li><li>Reference Dimension 1 - A2: 23.4 mm</li><li>Reference Dimension 2 - A1: 31 mm</li><li>Reference Dimension 2 - A2: 32.5 mm</li><li>Reference Dimension 3 - A1: 44 mm</li><li>Reference Dimension 3 - A2: 26.9 mm</li><li>Reference Dimension 4 - A1: 21.5 mm</li><li>Reference Dimension 4 - A2: 23.4 mm</li><li>Reference Dimension 5 - A1: 21.5 mm</li><li>Reference Dimension 5 - A2: 32.5 mm</li><li>Reference Dimension 6 - A1: 21.5 mm</li><li>Reference Dimension 6 - A2: 26.9 mm</li><li>L1: 34.5 mm</li><li>L2: 25.9 mm</li><li>t: 1.5 mm</li><li>Weight: 20 g</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Sensor Mounting Screws:</li><li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li><li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li></ul>

<h3>Features:</h3>
<ul>
<li>Brackets for mounting photo microsensors</li>
<li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li>
<li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li>
<li>Sensors can be mounted in various directions by tapping four locations</li>
<li>Material Stainless steel (SUS304)</li>
<li>Sensor mounting screws are included</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: L-V Type Bracket</li>
<li>Material: Stainless Steel SUS304</li>
<li>Reference Dimension 1 - A1: 44.8 mm</li>
<li>Reference Dimension 1 - A2: 23.4 mm</li>
<li>Reference Dimension 2 - A1: 31 mm</li>
<li>Reference Dimension 2 - A2: 32.5 mm</li>
<li>Reference Dimension 3 - A1: 44 mm</li>
<li>Reference Dimension 3 - A2: 26.9 mm</li>
<li>Reference Dimension 4 - A1: 21.5 mm</li>
<li>Reference Dimension 4 - A2: 23.4 mm</li>
<li>Reference Dimension 5 - A1: 21.5 mm</li>
<li>Reference Dimension 5 - A2: 32.5 mm</li>
<li>Reference Dimension 6 - A1: 21.5 mm</li>
<li>Reference Dimension 6 - A2: 26.9 mm</li>
<li>L1: 34.5 mm</li>
<li>L2: 25.9 mm</li>
<li>t: 1.5 mm</li>
<li>Weight: 20 g</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Sensor Mounting Screws:</li>
<li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li>
<li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li>
</ul>

Leland Tan

Iwata L-v Type Bracket for Photomicro Sensor 34.5mm FSPALV031-32S

iwata l-v type bracket photomicro sensor 34.5mm fspalv031-32s untuk accessories aksesoris kurungan jenis fotomikro aksesori iwata/岩田 l-v型微光传感器支架34.5mm it配件 岩田

iwata-l-v-type-bracket-for-photomicro-sensor-34-5mm-fspalv031-32s

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Brackets for mounting photo microsensors</li><li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li><li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li><li>Sensors can be mounted in various directions by tapping four locations</li><li>Material Stainless steel (SUS304)</li><li>Sensor mounting screws are included</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: L-V Type Bracket</li><li>Material: Stainless Steel SUS304</li><li>Reference Dimension 1 - A1: 44.8 mm</li><li>Reference Dimension 1 - A2: 18.4 mm</li><li>Reference Dimension 2 - A1: 31 mm</li><li>Reference Dimension 2 - A2: 27.5 mm</li><li>Reference Dimension 3 - A1: 44 mm</li><li>Reference Dimension 3 - A2: 21.9 mm</li><li>Reference Dimension 4 - A1: 21.5 mm</li><li>Reference Dimension 4 - A2: 18.4 mm</li><li>Reference Dimension 5 - A1: 21.5 mm</li><li>Reference Dimension 5 - A2: 27.5 mm</li><li>Reference Dimension 6 - A1: 21.5 mm</li><li>Reference Dimension 6 - A2: 21.9 mm</li><li>L1: 34.5 mm</li><li>L2: 20.9 mm</li><li>t: 1.5 mm</li><li>Weight: 18 g</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Sensor Mounting Screws:</li><li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li><li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li></ul>

<h3>Features:</h3>
<ul>
<li>Brackets for mounting photo microsensors</li>
<li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li>
<li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li>
<li>Sensors can be mounted in various directions by tapping four locations</li>
<li>Material Stainless steel (SUS304)</li>
<li>Sensor mounting screws are included</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: L-V Type Bracket</li>
<li>Material: Stainless Steel SUS304</li>
<li>Reference Dimension 1 - A1: 44.8 mm</li>
<li>Reference Dimension 1 - A2: 18.4 mm</li>
<li>Reference Dimension 2 - A1: 31 mm</li>
<li>Reference Dimension 2 - A2: 27.5 mm</li>
<li>Reference Dimension 3 - A1: 44 mm</li>
<li>Reference Dimension 3 - A2: 21.9 mm</li>
<li>Reference Dimension 4 - A1: 21.5 mm</li>
<li>Reference Dimension 4 - A2: 18.4 mm</li>
<li>Reference Dimension 5 - A1: 21.5 mm</li>
<li>Reference Dimension 5 - A2: 27.5 mm</li>
<li>Reference Dimension 6 - A1: 21.5 mm</li>
<li>Reference Dimension 6 - A2: 21.9 mm</li>
<li>L1: 34.5 mm</li>
<li>L2: 20.9 mm</li>
<li>t: 1.5 mm</li>
<li>Weight: 18 g</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Sensor Mounting Screws:</li>
<li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li>
<li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li>
</ul>

Iwata L-v Type Bracket for Photomicro Sensor 34.5mm FSPALV031-27S

iwata l-v type bracket photomicro sensor 34.5mm fspalv031-27s untuk accessories aksesoris kurung jenis aksesori iwata/岩田 l-v型支架，用于34.5mm fspalv031-27s光电传感器 it配件 岩田

iwata-l-v-type-bracket-for-photomicro-sensor-34-5mm-fspalv031-27s

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Brackets for mounting photo microsensors</li><li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li><li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li><li>Sensors can be mounted in various directions by tapping four locations</li><li>Material Stainless steel (SUS304)</li><li>Sensor mounting screws are included</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: L-H Type Bracket</li><li>Material: Stainless Steel SUS304</li><li>Reference Dimension 1 - A1: 44.8 mm</li><li>Reference Dimension 1 - A2: 18.4 mm</li><li>Reference Dimension 2 - A1: 31 mm</li><li>Reference Dimension 2 - A2: 27.5 mm</li><li>Reference Dimension 3 - A1: 44 mm</li><li>Reference Dimension 3 - A2: 21.9 mm</li><li>Reference Dimension 4 - A1: 21.5 mm</li><li>Reference Dimension 4 - A2: 18.4 mm</li><li>Reference Dimension 5 - A1: 21.5 mm</li><li>Reference Dimension 5 - A2: 27.5 mm</li><li>Reference Dimension 6 - A1: 21.5 mm</li><li>Reference Dimension 6 - A2: 21.9 mm</li><li>L1: 34.5 mm</li><li>L2: 18.9 mm</li><li>t: 1.5 mm</li><li>Weight: 18 g</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Sensor Mounting Screws:</li><li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li><li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li></ul>

<h3>Features:</h3>
<ul>
<li>Brackets for mounting photo microsensors</li>
<li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li>
<li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li>
<li>Sensors can be mounted in various directions by tapping four locations</li>
<li>Material Stainless steel (SUS304)</li>
<li>Sensor mounting screws are included</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: L-H Type Bracket</li>
<li>Material: Stainless Steel SUS304</li>
<li>Reference Dimension 1 - A1: 44.8 mm</li>
<li>Reference Dimension 1 - A2: 18.4 mm</li>
<li>Reference Dimension 2 - A1: 31 mm</li>
<li>Reference Dimension 2 - A2: 27.5 mm</li>
<li>Reference Dimension 3 - A1: 44 mm</li>
<li>Reference Dimension 3 - A2: 21.9 mm</li>
<li>Reference Dimension 4 - A1: 21.5 mm</li>
<li>Reference Dimension 4 - A2: 18.4 mm</li>
<li>Reference Dimension 5 - A1: 21.5 mm</li>
<li>Reference Dimension 5 - A2: 27.5 mm</li>
<li>Reference Dimension 6 - A1: 21.5 mm</li>
<li>Reference Dimension 6 - A2: 21.9 mm</li>
<li>L1: 34.5 mm</li>
<li>L2: 18.9 mm</li>
<li>t: 1.5 mm</li>
<li>Weight: 18 g</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Sensor Mounting Screws:</li>
<li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li>
<li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li>
</ul>

Iwata L-h Type Bracket for Photomicro Sensor 34.5mm FSPALH031-27S

iwata l-h type bracket photomicro sensor 34.5mm fspalh031-27s untuk accessories aksesoris kurungan jenis aksesori iwata/岩田 l-h型用于微型传感器的支架34.5mm it配件 岩田

iwata-l-h-type-bracket-for-photomicro-sensor-34-5mm-fspalh031-27s

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Brackets for mounting photo microsensors</li><li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li><li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li><li>Sensors can be mounted in various directions by tapping four locations</li><li>Material Stainless steel (SUS304)</li><li>Sensor mounting screws are included</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: L-V Type Bracket</li><li>Material: Stainless Steel SUS304</li><li>Reference Dimension 1 - A1: 44.8 mm</li><li>Reference Dimension 1 - A2: 13.4 mm</li><li>Reference Dimension 2 - A1: 31 mm</li><li>Reference Dimension 2 - A2: 22.5 mm</li><li>Reference Dimension 3 - A1: 44 mm</li><li>Reference Dimension 3 - A2: 16.9 mm</li><li>Reference Dimension 4 - A1: 21.5 mm</li><li>Reference Dimension 4 - A2: 13.4 mm</li><li>Reference Dimension 5 - A1: 21.5 mm</li><li>Reference Dimension 5 - A2: 22.5 mm</li><li>Reference Dimension 6 - A1: 21.5 mm</li><li>Reference Dimension 6 - A2: 16.9 mm</li><li>L1: 34.5 mm</li><li>L2: 15.9 mm</li><li>t: 1.5 mm</li><li>Weight: 16 g</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Sensor Mounting Screws:</li><li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li><li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li></ul>

<h3>Features:</h3>
<ul>
<li>Brackets for mounting photo microsensors</li>
<li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li>
<li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li>
<li>Sensors can be mounted in various directions by tapping four locations</li>
<li>Material Stainless steel (SUS304)</li>
<li>Sensor mounting screws are included</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: L-V Type Bracket</li>
<li>Material: Stainless Steel SUS304</li>
<li>Reference Dimension 1 - A1: 44.8 mm</li>
<li>Reference Dimension 1 - A2: 13.4 mm</li>
<li>Reference Dimension 2 - A1: 31 mm</li>
<li>Reference Dimension 2 - A2: 22.5 mm</li>
<li>Reference Dimension 3 - A1: 44 mm</li>
<li>Reference Dimension 3 - A2: 16.9 mm</li>
<li>Reference Dimension 4 - A1: 21.5 mm</li>
<li>Reference Dimension 4 - A2: 13.4 mm</li>
<li>Reference Dimension 5 - A1: 21.5 mm</li>
<li>Reference Dimension 5 - A2: 22.5 mm</li>
<li>Reference Dimension 6 - A1: 21.5 mm</li>
<li>Reference Dimension 6 - A2: 16.9 mm</li>
<li>L1: 34.5 mm</li>
<li>L2: 15.9 mm</li>
<li>t: 1.5 mm</li>
<li>Weight: 16 g</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Sensor Mounting Screws:</li>
<li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li>
<li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li>
</ul>

Iwata L-v Type Bracket for Photomicro Sensor 34.5mm FSPALV031-22S

iwata l-v type bracket photomicro sensor 34.5mm fspalv031-22s untuk accessories aksesoris kurungan jenis fotomikro aksesori iwata/岩田 l-v型微光传感器支架34.5mm it配件 岩田

iwata-l-v-type-bracket-for-photomicro-sensor-34-5mm-fspalv031-22s

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Brackets for mounting photo microsensors</li><li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li><li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li><li>Sensors can be mounted in various directions by tapping four locations</li><li>Material Stainless steel (SUS304)</li><li>Sensor mounting screws are included</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: L-H Type Bracket</li><li>Material: Stainless Steel SUS304</li><li>Reference Dimension 1 - A1: 44.8 mm</li><li>Reference Dimension 1 - A2: 13.4 mm</li><li>Reference Dimension 2 - A1: 31 mm</li><li>Reference Dimension 2 - A2: 22.5 mm</li><li>Reference Dimension 3 - A1: 44 mm</li><li>Reference Dimension 3 - A2: 16.9 mm</li><li>Reference Dimension 4 - A1: 21.5 mm</li><li>Reference Dimension 4 - A2: 13.4 mm</li><li>Reference Dimension 5 - A1: 21.5 mm</li><li>Reference Dimension 5 - A2: 22.5 mm</li><li>Reference Dimension 6 - A1: 21.5 mm</li><li>Reference Dimension 6 - A2: 16.9 mm</li><li>L1: 34.5 mm</li><li>L2: 13.9 mm</li><li>t: 1.5 mm</li><li>Weight: 16 g</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Sensor Mounting Screws:</li><li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li><li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li></ul>

<h3>Features:</h3>
<ul>
<li>Brackets for mounting photo microsensors</li>
<li>Compatible with OMRON EE-SX47/67/97 series and Panasonic PM-45/65 series</li>
<li>Standard dimensions A1 to A6 vary depending on the sensor type and mounting direction</li>
<li>Sensors can be mounted in various directions by tapping four locations</li>
<li>Material Stainless steel (SUS304)</li>
<li>Sensor mounting screws are included</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: L-H Type Bracket</li>
<li>Material: Stainless Steel SUS304</li>
<li>Reference Dimension 1 - A1: 44.8 mm</li>
<li>Reference Dimension 1 - A2: 13.4 mm</li>
<li>Reference Dimension 2 - A1: 31 mm</li>
<li>Reference Dimension 2 - A2: 22.5 mm</li>
<li>Reference Dimension 3 - A1: 44 mm</li>
<li>Reference Dimension 3 - A2: 16.9 mm</li>
<li>Reference Dimension 4 - A1: 21.5 mm</li>
<li>Reference Dimension 4 - A2: 13.4 mm</li>
<li>Reference Dimension 5 - A1: 21.5 mm</li>
<li>Reference Dimension 5 - A2: 22.5 mm</li>
<li>Reference Dimension 6 - A1: 21.5 mm</li>
<li>Reference Dimension 6 - A2: 16.9 mm</li>
<li>L1: 34.5 mm</li>
<li>L2: 13.9 mm</li>
<li>t: 1.5 mm</li>
<li>Weight: 16 g</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Sensor Mounting Screws:</li>
<li>Semus screws (SUSXM7) M3 x 6L - 2 Pieces</li>
<li>Sems screws (SUSXM7) M3 x 10L - 2 Pieces</li>
</ul>

Iwata L-h Type Bracket for Photomicro Sensor 34.5mm FSPALH031-22S

iwata l-h type bracket photomicro sensor 34.5mm fspalh031-22s untuk accessories aksesoris kurung jenis aksesori iwata/岩田 l-h型光电传感器34.5mm fspalh031-22s支架 it配件 岩田