UHU HART 35g

Special adhesive for assembling small parts in model building

PROPERTIES

- Crystal clear

- For assembling small parts in model building, handicraft and for general use at home

- Particularly suitable for balsa wood and wooden materials

- Sets as a hard film suitable to reinforce weak areas

APPLICATION

SUITABLE FOR:

Suitable for balsa wood, wood based materials, metal and many types of plastic. For model building.

NOT SUITABLE FOR:

Not suitable for Styrofoam®, PE, PP, PA, POM, PTFE, silicone.

HANDLING

BEFORE USE:

Personal safety

The adhesive contains volatile, highly flammable solvents. Therefore, corresponding safety measures should be take regarding processing and storage. When gluing ensure adequate ventilation.

Surface requirements

The surface must be dry, clean and free of dust and grease.

DURING USE:

Directions for use

Apply a thin layer to one side. Immediately place the parts together and hold in place. For hard, enclosed surfaces apply a thin layer to both sides, let the adhesive dry, then re-apply to one side, place the parts together and hold in place.

AFTER USE:

Stains/residue

Remove fresh glue stains as soon as possible. Cured adhesive residue can only be removed mechanically.

Storage conditions

Store in tightly closed packaging in a dry, cool and frost-free place.

Comes in box of 10