Overview

Power source for capacitor discharge welding of studs of 3 to 8 mm diameter and other accessories, wit tip strike.

It is suitable for applications in heating systems, installation and maintenance works

It enables welding of studs on non-treated or non-oxidized surfaces in steel, stainless steel, galvanized steel, brass and, in particular, aluminium

The welding process is so short that it causes no alteration to the opposing surface even if painted, plastic-coated or galvanized. 115-230V automatic voltage reversal

Complete with gun, earth cable with clamp and accessories

Features

• Generator for capacitor discharge welding of pins with a 3 to 8 mm diameter and other accessories, with tip strike. With
• gun, earth cable with M4 pins.
• It enables welding of pins on non-treated or non-oxidised surfaces in steel, stainless steel, galvanised steel, brass and, in
• particular, aluminium.
• The short welding process reduces to a minimum the thermal alterations on the part.
• Automatic 115-230V voltage change.

Technical Details

• Single phase mains voltage: 115/ 230V
• Mains frequency: 50/ 60 Hz
• Secondary no-load voltage: 12V
• Max. absorbed power: 0.9 kw
• Power factor (cosphi): 0.8
• Capacity: 66000 μF
• Spot energy: 1500 J max
• Spot time: 1 - 3 ms
• NR. spottable studs: 20 studs/min
• Spottable stud diameter: 3-8 mm
• Protection degree: IP23
• Dimensions: 43 x 17 x 29 cm
• Weight: 15.5 kg