Overview

MIG-MAG/BRAZING/MMA and TIG DC-Lift multiprocess inverter welding machine.
Flexible use with various materials (steel, stainless steel, high strength steel, aluminium, galvanized sheet metal) and a wide variety of application fields (sheet metal, maintenance, installation, bodyworks, etc..).

Values setting and visualization of welding progress of the parameters on display.

Set for MIG-MAG welding in 2/4 strokes with reactance adjustment; TIG DC-Lift; MMA.

Features

• Robust construction;
• Reduced weight and dimensions;
• High energy saving;
• Display for a dynamic display of set values;

MIG-MAG

• 2/4 strokes operation selection;
• Electronic reactance adjustment;

MMA

Synergic adjustment of Arc Force and Hot Start according to the type of electrode in use;

Anti-stick device;

TIG

• DC LIFT striking and display of welding voltage and current.

Protections: thermostatic, overvoltage (+15%), undervoltage(-25%), overcurrent, engine driven generator (+/-15%);

Technical Details

• Three-phase mains voltage: 400V
• Mains frequency: 50/60 Hz
• Current range: 20 - 250 A
• Max. current: 250@30% A
• DC current: 180A
• Max. no-load voltage: 77 V
• Max. absorbed current: 17.4 A
• Absorbed current at 60%: 11.4 A
• Max. absorbed power: 8.8 kW
• Absorbed power at 60%: 5.7 kW
• Efficiency: 85%
• Power factor: 0.72
• D-usable electrodes in DC: 1.6 - 5 mm
• Steel welding wire diameter: 0.6 - 1.2 mm
• Inox welding wire diameter: 0.8 - 1 mm
• Aluminium welding wire diam.: 0.8 - 1 mm
• Flux-cored welding wire diam.: 0.8 - 1.2 mm
• Brazing wire diam.: 0.8 - 1 mm
• Protection degree: IP 22
• Dimensions: 92 x 46 x 80 cm
• Weight: 44.5 kg