The USB3SSATAIDE USB 3.0 to IDE/SATA Adapter Cable connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 Port (Backward compatible with USB 2.0). The adapter lets you connect a bare drive with no enclosure, saving time and hassle.

The USB 3.0 SATA/IDE Adapter lets you externally connect a bare drive with no drive enclosure or HDD dock required, and features LED indicators that allow you to easily monitor status and activity updates.

The adapter cable works with Windows®, Linux, and Mac® computers and does not require any software or driver installation - a true plug-and-play solution for adding cost-effective external storage, or overcoming incompatibility between all hard drives and USB enabled motherboards that may not be SATA or IDE-equipped.

Connector(s)

Drive Connectors
1 - LP4 (4 pin; Large Drive Power)

1 - IDE (44 Pin, EIDE/PATA, 2.5" HDD)

1 - IDE (40 Pin, EIDE/PATA)

1 - SATA Power (15 pin)

1 - SATA (7 pin, Data)
Host Connectors
1 - USB Type-A (9 pin, 5 Gbps)

Environmental

Operating Temperature
0°C to 50°C (32°F to 122°F)
Storage Temperature
-20°C to 60°C (-4°F to 140°F)
Humidity
5% ~ 85% RH

Hardware

Interface
SATA & IDE
Bus Type
USB 3.2 Gen 1 (5Gbps)
Number of Drives
1
Drive Size
2.5in & 3.5in
Compatible Drive Types
SATA & IDE
Chipset ID
Innostor - IS611

Indicators

LED Indicators
1 - SATA Detect/Activity
1 - USB Link
1 - IDE Detect/Activity

Performance

Maximum Data Transfer Rate
4.8 Gbps
Type and Rate
USB 3.0 - 4.8 Gbit/s
Hardware Raid Supported
No
ATAPI Support
Yes
MTBF
35,000 hours

Power

Power Source
AC Adapter Included
Output Current
2A

Software

OS Compatibility
OS independent; No software or drivers required

Special Notes / Requirements

Note
Backwards compatible with USB 1.1 standard, but not recommended due to slow transfer rate.