SHOW SHINE
Hi Speed Buffable, Floor Finish and Sealer

Show Shine is a high solids metallized thermal-plastic styrene-arcylic polymers designed to provide the maximum in durability and economy. The film provided by Show Shine is clear, flexible and tough. It is easily dry buffed or spray buffed to a 'wet-look' gloss.

Features:
Hard, tough, brilliant, super-clear gloss straight off the mop.
Good flow and leveling
Extra durability, resistance to black heel marking and wearing. Hence less spray buffing and recoating.
Excellent water and chemical resistance
Excellent resistance to powdering or flaking
Fast drying
Good repairing – surface marks easily removed, recoated and repaired

Application: Use on all resilient and non-resilient floor, vinyl, vinyl asbestos, asphalt rubber tile etc. as well as terrazo, marble, quarry tile, concrete and sealed wood floor.

Directions: Sweep the floor. Scrub the floor with DURASTRIP to remove all previous treatments. The floor must be rinsed thoroughly by water. Apply two or three coats of SHOW SHINE with applicator or mop evenly to the dry floor surface, allowing each coat to dry before applying the next. About six months intervals, depending on traffic condition, start a new maintenance cycle.

20L Pail