Schneider Electric XPSCM1144 single-beam photo-electric Sensors - Module XPS-CM

This XPSCM safety module is for monitoring of single-beam photo-electric sensors and has a built-in "muting" function. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2.

Main

• Range of Product: Telemecanique Safety Light Curtains XUSL
• Product or Component Type: Safety Module
• Safety Module Name: XPSCM
• Safety Module Application: For monitoring of single beam photo-electric sensor
• Function of Module: Built-in muting
• Safety Level:
• Can reach Category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1
• Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061
• Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1
• Safety Reliability Data:
• MTTFd (Mean Time To Dangerous Failure) = 16.6 years conforming to EN/ISO 13849-1
• DC (Diagnostic Coverage) = 95.5% conforming to EN/ISO 13849-1
• PFH (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 61508
• PFHd (Probability of Dangerous Failure per Hour) = 3.12E-7 1/h conforming to EN/IEC 62061
• Number of Inputs:
• 2 (terminals MA, MB) for muting function
• 4 (terminals Z1, Z2, Z3, Z4) for sensor
• Input Voltage:
• 24 V DC for sensor
• 24 V DC (terminals U+, U-) for muting function
• Input Compatibility:
• XC limit switch for muting function
• XU2M18PP340... for muting function
• XU2S18PP340... (infrared) for sensor
• XU9M18PP340... for muting function
• Connections - Terminals: Various captive screw clamp terminals for different cable types and configurations
• Output Type: Relay 2 NO (Normally Open) (13-14, 23-24), volt-free
• Number of Additional Circuits: 0
• Rated Supply Voltage ([Us]): 24 V DC with a tolerance of -20% to +20%

Complimentary

• Sensor Power Supply:
• U+, U-: 24 V DC
• Maximum Supply Current for Sensors:
• 200 mA
• Input Current:
• 200 mA for muting function
• Synchronization Time Between Inputs:
• 3 s (+/- 20 %) for the activation of the MA/MB muting signal
• Muting Maximum Duration:
• 60 s (-10...30 %)
• Maximum Line Resistance:
• 10 Ohm for sensor power supply
• Breaking Capacity:
• 180 VA holding AC-15 C300 relay output
• 1800 VA inrush AC-15 C300 relay output
• 20 mA at 24 V for solid-state output
• 1.5 A at 24 V (DC-13) time constant: 50 ms for relay output
• Associated Fuse Rating:
• 4 A gG for relay output conforming to DIN VDE 0660 part 200
• 4 A gG for relay output conforming to EN/IEC 60947-5-1
• 6 A fast blow for relay output conforming to DIN VDE 0660 part 200
• 6 A fast blow for relay output conforming to EN/IEC 60947-5-1
• Minimum Output Current:
• 10 mA for relay output
• Minimum Output Voltage:
• 17 V for relay output
• Maximum Response Time on Input Open:
• 25 ms
• Local Signaling:
• 1 LED for electronic internal fuse status
• 1 LED for restarting function
• 1 LED for safety outputs closed function
• 1 LED for safety outputs open function
• 1 incandescent lamp for muting power consumption: 4…6.5 W
• Output Thermal Current:
• 5.6 A per relay
• 11 A maximum
• Maximum Power Consumption in W:
• 15 W
• Protection Type:
• Electronic internal fuse
• [Ui] Rated Insulation Voltage:
• 300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2
• 300 V (pollution degree 2) conforming to EN/IEC 60947-5-1
• [Uimp] Rated Impulse Withstand Voltage:
• 4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2
• 4 kV overvoltage category III conforming to EN/IEC 60947-5-1

Environment

• Ambient Air Temperature:
• For Operation: -10…55 °C
• For Storage: -25…85 °C
• IP Degree of Protection:
• IP20 (terminals) conforming to IEC 60529
• IP40 (enclosure) conforming to IEC 60529