施耐德电气 ATV930D37N4 ATV930 - 变频器

Singapore

登记

搜索关键字、项目或型号

Press

to jump to the search box

购物清单

大车

CNY - ¥

施耐德电气 ATV930D37N4 ATV930 - 变频器

View Brand

施耐德电气 ATV930D37N4 ATV930 - 变频器

品牌:	SCHNEIDER ELECTRIC
模型:	ATV930D37N4

技术数据表

Product Datasheet

User guide

Catalogue

Environmental disclosure

Specifications

View other Inverter Drives dimensions or variations

Local Signalling

2 LEDs for local diagnostic 1 LED (yellow) for embedded communication status 2 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage

Range of Product

Easy Altivar 610

Mounting Mode

Cabinet mount

Accuracy

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Standard

IEC 61800-3 Environment 2 category C3 IEC 61800-3 IEC 61800-5-1 IEC 60721-3

IP Degree of Protection

IP20

Ambient Air Temperature for Operation

-15…45 °C (without derating) 45…60 °C (with derating factor)

Ambient Air Temperature for Storage

-40…70 °C

Operating Altitude

<= 1000 m without derating 1000...4800 m with current derating 1 % per 100 m

Vibration Resistance

1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6

[Us] Rated Supply Voltage

380...460 V - 15...10 %

Supply Frequency

50...60 Hz +/- 5 %

Switching Frequency

2...12 kHz adjustable

Noise Level

65 dB conforming to 86/188/EEC

Transmission Rate

4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial

Power Dissipation in W

410 W(forced convection) at 380 V, switching frequency 4 kHz 64 W(natural convection) at 380 V, switching frequency 4 kHz

Sampling Duration

5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input 2 ms +/- 0.5 ms (DI1...DI6)configurable - discrete input 5 ms +/- 1 ms (DI5, DI6)configurable - pulse input 10 ms +/- 1 ms (AQ1, AQ2) - analog output

Continuous Output Current

39.2 A at 4 kHz for normal duty 31.7 A at 4 kHz for heavy duty

Line Current

37.2 A at 380 V (normal duty) 33.5 A at 460 V (normal duty) 31.6 A at 380 V (heavy duty) 28.3 A at 460 V (heavy duty)

Apparent Power

26.7 kVA at 460 V (normal duty) 22.6 kVA at 460 V (heavy duty)

Maximum Transient Current

43.1 A during 60 s (normal duty) 47.6 A during 60 s (heavy duty)

Linearity Error

AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AQ1, AQ2: +/- 0.2 % for analog output

Width

211 mm

Device Short Name

ATV610

Product or Component Type

Variable speed drive

Depth

232 mm

Height

495 mm 580 mm with EMC plate

Pollution Degree

2 conforming to IEC 61800-5-1

Relative Humidity

5…95 % without condensation conforming to IEC 60068-2-3

Marking

Environmental Characteristic

Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to IEC 60721-3-3

Analog Input Type

AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits AI2, AI3 software-configurable temperature probe or water level sensor

Electromagnetic Compatibility

Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6

Motor Power kW

18.5 kW for normal duty 15 kW for heavy duty

Motor Power hp

25 hp for normal duty 20 hp for heavy duty

Minimum Switching Current

Relay output R1, R2, R3: 5 mA at 24 V DC

Insulation Resistance

> 1 MOhm 500 V DC for 1 minute to earth

Operating Position

Vertical +/- 10 degree

Product Specific Application

Fan, pump, compressor, conveyor

Shock Resistance

15 gn for 11 ms conforming to IEC 60068-2-27

Protection Type

Thermal protection: motor Motor phase break: motor Thermal protection: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive

Connector Type

1 RJ45 (on the remote graphic terminal) for Modbus serial

Product Destination

Asynchronous motors Synchronous motors

Output Voltage

<= power supply voltage

Discrete Input Number

Analogue Input Number

Maximum Switching Current

Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC

Electrical Connection

Control, screw terminals: 0.5...1.5 mm² Line side, screw terminal: 10...16 mm² Motor, screw terminal: 10...16 mm²

Network Number of Phases

3 phases

Discrete Input Logic

Positive logic (source): DI1...DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1) Negative logic (sink): DI1...DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1) Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1)

Output Frequency

0.1…500 Hz

Supply

External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection

Physical Interface

2-wire RS 485 for Modbus serial

Input Compatibility

DI1...DI6: logic input level 1 PLC conforming to IEC 61131-2 DI5, DI6: pulse input level 1 PLC conforming to IEC 65A-68

Analogue Output Number

Analogue Output Type

Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits

EMC Filter

Integrated conforming to IEC 61800-3 category C3 with 50 m

Method of Access

Slave

Type of Cooling

Forced convection

Communication Port Protocol

Modbus serial

Variant

Standard version

Asynchronous Motor Control Profile

Variable torque standard Optimized torque mode Constant torque standard

Nominal Switching Frequency

4 kHz

Prospective Line Isc

22 kA

Discrete Input Type

DI1...DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)

Relay Output Number

Relay Output Type

Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles

Transmission Frame

RTU for Modbus serial

Number of Addresses

1…247 for Modbus serial

Type of Polarization

No impedance for Modbus serial

Acceleration and Deceleration Ramps

Linear adjustable separately from 0.01 to 9000 s S, U or customized

Motor Slip Compensation

Can be suppressed Automatic whatever the load Adjustable Not available in permanent magnet motor law

Braking to Standstill

By DC injection