施耐德电气 ATSU01N209LT 异步电机软启动器、Altistart U01、Tesys U、ATSU01、9A、200 至 480V、1.5 至 4kW

Singapore

登记

搜索关键字、项目或型号

Press

to jump to the search box

购物清单

大车

CNY - ¥

家

所有类别

施耐德电气 ATSU01N209LT 异步电机软启动器、Altistart U01、Tesys U、ATSU01、9A、200 至 480V、1.5 至 4kW

View Brand

施耐德电气 ATSU01N209LT 异步电机软启动器、Altistart U01、Tesys U、ATSU01、9A、200 至 480V、1.5 至 4kW

品牌:	SCHNEIDER ELECTRIC
模型:	ATSU01N209LT

技术数据表

Product Datasheet

Instruction sheet

Catalogue

Specifications

View other Soft Starters dimensions or variations

Range Of Product

Altistart U01 and TeSys U

Network Frequency

47.5...63 Hz

Standards

EN/IEC 60947-4-2

Ip Degree Of Protection

IP20

Pollution Degree

2 conforming to EN/IEC 60947-4-2

Relative Humidity

5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

Ambient Air Temperature For Operation

-10…40 °C (without derating) 40…50 °C (with current derating of 2 % per °C)

Ambient Air Temperature For Storage

-25…70 °C conforming to EN/IEC 60947-4-2

Motor Power Kw

4 kW, 3 phases at 400 V 1.5 kW, 3 phases at 230 V

Product Certifications

UL C-Tick CSA CCC

Supply Voltage Limits

180…528 V

Supply Frequency

50...60 Hz - 5...5 %

Device Short Name

ATSU01

Product Or Component Type

Soft starter

Utilisation Category

AC-53B conforming to EN/IEC 60947-4-2

Operating Altitude

<= 1000 m without derating > 1000 m with current derating of 2.2 % per additional 100 m

Tightening Torque

0.5 N.m 1.9…2.5 N.m

Marking

Electromagnetic Compatibility

Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity level B conforming to EN 50082-2 Harmonics level 3 conforming to IEC 1000-3-2 Harmonics level 3 conforming to IEC 1000-3-4 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current impulse level 3 conforming to IEC 61000-4-5 Conducted and radiated emissions level 3 conforming to IEC 61000-4-6 Immunity to conducted interference caused by radio-electrical fields level 4 conforming to IEC 61000-4-11

[Uc] Control Circuit Voltage

24 V DC +/- 10 %

Motor Power Hp

2 hp, 3 phases at 230 V 5 hp, 3 phases at 460 V

Minimum Switching Current

10 mA at 6 V DC for relay outputs

Operating Position

Vertical +/- 10 degree

Product Specific Application

Simple machine

Shock Resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Vibration Resistance

1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6

[Us] Rated Supply Voltage

200...480 V - 10...10 %

Product Destination

Asynchronous motors

Output Voltage

<= power supply voltage

Discrete Input Voltage

24...40 V

Assembly Style

With heat sink

Current Consumption

65 mA

Maximum Switching Current

Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 250 V AC AC-15 cos phi = 0.5 and L/R = 20 ms inductive load

Electrical Connection

4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit Screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit

Maximum Switching Voltage

440 V relay outputs

Network Number Of Phases

3 phases

Function Available

Integrated bypass

Discrete Input Logic

Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA

Discrete Output Voltage

24 V (voltage limits: 6...30 V) open collector logic

Discrete Output Current

2 A DC-13 3 A AC-15

Power Dissipation In W

1.5 W at full load and at end of starting 91.5 W in transient state

Display Type

1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached

Type Of Start

Start with voltage ramp

Discrete Input Type

Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm

Discrete Output Type

Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO

Motor Power Range Ac-3

1.1…2 kW at 200…240 V 3 phases 2.2…3 kW at 380…440 V 3 phases 4…6 kW

Icl Starter Rating

9 A

Starting Time

1 s / 100 5 s / 20 10 s / 10 Adjustable from 1 to 10 s

Starting Torque

30...80 % of starting torque of motor connected directly on the line supply

Motor Starter Type

Soft starter

Deceleration Time Symb

Adjustable from 1 to 10 s

Input Output Isolation

Galvanic between power and control

产品描述

¥ 2210.10

数量:

This item is sold by

Schneider Electric