EE-1001 Connector for Ee Sensor

Contact resistance: 15 mΩ max. (at 100 VDC max.)
Insertion strength : 68.6 N max
Ambient humidity : - 10 to +75 °C

Material
Housing: Polybutylene phthalate (PBT)
Contact: Phosphor bronze

Applicable Photomicrosensors : EE-SX67[] (A, P, R) (Connector Models only), EE-SX47[], EE-SY67[], EE-SPY31[]/41[], EE-SPX303N/403N, EE-SPW311/411

*1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor,
       grip the top and bottom of the Connector housing, as shown in the following diagram, and
       then pull out the Connector.
*2. The insertion/removal durability and lock strength apply only to the lock mechanism.
       They do not apply to the EE-1001, EE-1001-1, and EE-1006, which do not have lock
       mechanisms.
*4. Do not store the type EE-1009, EE-1001, EE-1001-1 and EE-1002 under the following
       conditions since their terminals may discolor.
       (1) In the place exposed to the direct sunlight, the high temperature or high humidity.