Murr 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)

Product fulfills requirements according to UN/ECE R118

Ethernet CAT5

Male straight – male straight

RJ45 – RJ45, 4-pole

shielded

Further cable lengths on request.

Plastic housings with good resistance against chemicals and oils.

Cable Length:

• 5 m

Side 1

• Mounting method: inserted
• Family construction form: RJ45
• No. of poles: 4

Electrical Data | Supply

• Operating voltage DC max.: 60 V
• Current operating per contact max.: 1.5 A

Industrial Communication

• Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)
• Data transmission rate max.: 100 MBit/s

Industrial Communication | Ethernet Functionality

• Duplex: Full duplex

Diagnostics

• Status indication LED: no

Device Protection | Electrical

• Degree of protection (EN IEC 60529): IP20
• Pollution Degree: 3
• Rated surge voltage: 1 kV
• Material group (IEC 60664-1): I

Mechanical Data

• Contour for corrugated hose: without

Mechanical Data | Material Data

• Material housing: PUR
• Locking material: PA

Mechanical Data | Mounting Data

• Locking techniques: Snap-in connector

Environmental Characteristics | Climatic

• Operating temperature min.: -25 °C
• Operating temperature max.: 85 °C
• Additional condition temperature range: depending on cable quality

Important Installation Notes

• Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.
• Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as excessive bending forces could compromise the IP protection class.

Cable Data

• Wire arrangement: white, yellow, blue, orange

General Data | Cable

• Cable identification: 796
• Jacket color: green
• Type of certificate: cURus

Structure | Cable

• Amount stranding: 1
• Stranding: 4 wires around core filler twisted
• Cable shielding (type): copper braid, tinned
• Cable shielding (coverage): 85%
• Banding: Fleece, foil
• Filler: yes

Mechanical Data | Cable

• Cable weight: 69.3 g/m
• Material jacket: PUR
• Shore hardness jacket: 89 Shore A
• Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free
• Outer diameter (jacket): 6.7 mm
• Tolerance outer diameter (sheath): ± 5%
• Material inner jacket: FRNC
• Color (inner jacket): natur
• Material wire insulation: PE
• Amount wires: 4
• Outer diameter insulation: 1.4 mm
• Outer diameter tolerance core insulation: ± 5%
• Shore hardness wire insulation: 65 Shore D
• Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free
• Amount strands (wire): 7
• Diameter of single wires: 22 AWG
• Conductor cross-section (wire): 22 AWG
• Material conductor wire: Stranded copper wire, bare

Electrical Data | Cable

• Nominal voltage AC max.: 300 V
• Current load capacity (standard): to DIN VDE 0298-4
• Current load capacity min. wire: 4.8 A
• Characteristic impedance: 100 Ω ± 15% @ 100 MHz
• Electrical resistance line constant wire: 55 Ω/km @ 20 °C
• AC withstand voltage (wire - wire): 2 kV @ 60 s
• Electrical capacity line constant (wire - wire): 50,000 pF/km
• Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s
• AC withstand voltage (wire - shield): 2 kV @ 60 s
• Isolation resistance: 5000 MΩ × km

Temperature Range | Cable

• Min. operating temperature (static): -40 °C
• Max. operating temperature (fixed): 80 °C
• Operating temperature min. (dynamic): -30 °C
• Operating temperature max. (dynamic): 70 °C

Resistances | Cable

• Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2
• Chemical resistance: Good, application-related testing
• Gasoline resistance: Good, application-related testing
• Oil resistance: DIN EN 60811-404 | Good, application-related testing

Installation | Cable

• Bending radius (fixed): 5 x Outer diameter
• Bending radius (dynamic): 12 x Outer diameter
• No. of bending cycles (C-track): 3 Mio. @ 25 °C
• Traversing distance (C-track): 5 m @ 25 °C
• Travel speed (C-track): 3.3 m/s @ 25 °C
• No. of torsion cycles: 1 Mio. @ 25 °C
• Torsion stress: ± 180 °/m