Introduction:

The Jabsco 53081-2003 is a bronze Flexible Impeller pump with a Nitrile Impeller, Nitrile/Carbon/Ceramic Mechanical Seal, 1-1/2 Inch BSP threaded Ports, coupled to a 1450 RPM, 230 Volts, 50 HZ Motor. This Pump has an integral fluid reservoir to protect pump against dry running for up to 30 minutes. The motor is 4 Pole, single phase, 550 Watt, AC. Face and Foot mounting B3-B14. Enclosure IP55, Frame size 80 all IEC 72 standard. Fitted with manual reset thermal overload. Jabsco bronze bodied AC motor pumps are self-priming, portable and versatile, making them ideal for a wide range of applications wherever AC power is available.

Features :

Pump body: bronze

Weight: 11kg

Shaft: AISI316 stainless steel

Shaft seal: mechanical (carbon-ceramic)

Impeller: Nitrile oil-resistant impeller

Max. recommended liquid viscosity: 150cp.

Motor: 4 pole, totally enclosed, fan ventilated, IP55 enclosure.

Single-phase motors fitted with manual reset thermal overload cut-out.

Product Specs :

- Rapid self-priming up to 2 metres vertical lift.

- Handles hard and soft solids up to 4mm in size.

- Can pump up to 90% entrained air.

- Up to 30 minutes dry running protection.

- Quick and simple to maintain

- Light, compact, portable and tough

Others:

• Connections: 1½” BSP internal threaded ports
• Dimensions: 330mm long, 250mm wide, 240mm high
• Output: up to 80 litres/minute
• Built-in dry-running protection for up to 30 minutes after initial prime
• Rapid self-priming from dry up to 3m
• Will handle hard or soft solids
• Corrosion resistant bronze body, stainless steel shaft
• Carbon-ceramic mechanical shaft seal
• Simple, fully serviceable design with few wearing parts
• Continuously Rated Motor