AM COAT ANTI-ODOUR self-disinfecting coating

RUB & CLEAN AM COAT ANTI-ODOUR is manufactured locally by CLP International.

AM COAT ANTI-ODOUR is a 2 in 1 purpose odour removal and an antimicrobial self-disinfecting coating. It eliminates the unpleasant and foul smell from household items such as bags, carpets, floor mats, mattresses & coverings, seat cushions, as well as footwear insoles, etc., leaving it with a natural scent. When applied on high touch point surface like handrails, doorknobs, light switches, tables, chairs and armrests, household appliance handles, mobile devices and remote controllers, etc., it forms a semi-permanent microscopic layer with positive charged nitrogen atom molecules on the surface and ruptures the pathogens’ cell membrane upon contact, deactivating their infection ability. It kills 99.9% of bacteria and inhibits mould growth, 24/7, up to 10 days.

“Odour” is caused by the interaction between human body sweat and bacteria trapped in the fabric or footwear insoles’ tissues and fibres. Odour with a heavy musty smell occurs when the microbial volatile organic compounds (mVOCs) are produced from increasing mould growth or mycelium indoors.

Moulds float everywhere in the air and they disperse spores, moulds spread and multiply within 24-48 hours in a favourable environment which is humid, moist, and wet. Frequent inhalation of the musty smell from mVOCs can cause allergies or serious health problems for humans.

AM COAT ANTI-ODOUR is also an antimicrobial travel-safe companion to bring along to protect your luggage and bags from pathogenic contamination.

Applications:

1. Spray AM COAT sparingly on fabric or footwear insoles with odour and leave to 1dry.

- Mould mycelium on fabric is recommended to do laundry wash

1(different porous surface drying time differs, thick porous surface requires more

AM COAT and longer dry time)

2. For non-porous surfaces, apply neat and do wipe-down, or clear mould 2mycelium.

The cleaned and treated surface will protect and self-disinfect 24/7, up to 10 days.

2(AM COAT does not remove deep rooted mycelium on silicone seal in bathroom)

3. Re-apply AM COAT to eliminate odour and inhibit mould growth after 10 days, or if

they persist. Re-apply AM COAT if the treated substrate is washed and the odour reoccurs.

Ingredients:

Manufacture based on Organo Silane Quat Technology, contains US – EPA approved antimicrobial active ingredient. *Tested effective against coronavirus and MRSA

Precaution:

Wear mask during application to avoid inhaling mVOCs. Wear a goggle to avoid contact with eyes, rinse with running water until clear if the content gets into the eye, and seek medical help immediately if irritation persists. Avoid contact with food. Do not ingest. Store at room temperature. *KEEP OUT OF REACH OF CHILDREN!

*- Stocks are subject to ex-stock availability, kindly allow a lead time of 3-5 days for delivery

*- Run-out-stocks require 5-7 days for production, packing and delivery

*- Quantity above 100 bottles kindly allow 7 to 14 days for production, packing and delivery

For more information: Email: cscare@clp.com.sg

Call or WhatsApp: +65 8223 1084