SealXtreme PLUS Active Leak Repair Kit

SEALXTREME® Active Leak Repair Kit seals active pressurized leak

under 30 minutes. It stops leaks on the pipe without the requirement of

the system shut down. The maximum pressure Active Leak Repair Kit can

seal is approximately 150 psi (10Bar) of live operating water pressure.

This is a specially formulated wrap repair system that is durable and

cost-effective to seal pipe leaks with high industrial strength.

FEATURES:
-  Handy wrap repair system designed to fix active leaks in 15 minutes
-  Provide permanent repair
-  Repair active leak up to 150 psi
-  Extend pipe life
-  No shutdown required
-  Applicable to any metal or non-metal pipes up to 18-inch diameter
-  Withstand pressure up to 400psi and temperature up to 200°C when cured
-  Chemical resistance (acids, alkalis, solvents and etc)

KEY TECHNICAL DATA:

• Tensile Strength : 36,000 psi

• Lap Shear Strength : 900 psi

• Flexural Strength : 26,000 psi

• Application Temperature : 0°C to 65°C

• Dielectric Strength : 16,000 volts

• Hardness : 85 Shore D

• Service Temperature : -50°C to 120°C

• Design Pressure : 400 psi

PACKAGING INFORMATION:
Each Kit Contains:
- QuikControl Fiberglass Repair Tape
- QuikControl Sealing Tape
- SmartStic Underwater Epoxy Stick
- Protective Gloves

Packaging

• QuikControl Fibreglass 2" x 6fts + 25mm x 3mtr x 0.5mm (SALRK0206)
• QuikControl Fibreglass 2" x 12fts + 25mm x 3mtr x 0.5mm (SALRK0212)
• QuikControl Fibreglass 3" x 9fts + 32mm x 5mtr x 0.5mm (SALRK0309)
• QuikControl Fibreglass 4" x 12fts + 50mm x 5mtr x 0.5mm (SALRK0412)