ตัวควบคุม Schneider Electric TM200CE24R, Modicon Easy M200, 24 Io, รีเลย์, อีเธอร์เน็ต

Singapore

เข้าสู่ระบบ

ลงทะเบียน

คำค้นหา รายการ หรือ รุ่น

Press

to jump to the search box

รายการช้อปปิ้ง

รถเข็น

SGD - S$

บ้าน

หมวดหมู่ทั้งหมด

ระบบอัตโนมัติและการควบคุม

Programmable Logic Controllers

ตัวควบคุม Schneider Electric TM200CE24R, Modicon Easy M200, 24 Io, รีเลย์, อีเธอร์เน็ต

View Brand

ตัวควบคุม Schneider Electric TM200CE24R, Modicon Easy M200, 24 Io, รีเลย์, อีเธอร์เน็ต

ยี่ห้อ:	SCHNEIDER ELECTRIC
โมเดล:	TM200CE24R

เอกสารข้อมูลทางเทคนิค

Product Datasheet

Catalogue

Environmental disclosure

Specifications

View other Programmable Logic Controllers dimensions or variations

Product Or Component Type

Logic controller

Range Of Product

Easy Modicon M200

Standards

IEC 61010-2-201 IEC 61131-2

Ip Degree Of Protection

IP20 with protective cover in place

Relative Humidity

10…95 %, without condensation (in operation) 10…95 %, without condensation (in storage)

Ambient Air Temperature For Operation

0…55 °C (horizontal installation)

Ambient Air Temperature For Storage

-25…70 °C

Operating Altitude

0...2000 m

Product Certifications

RCM IACS E10 cULus CSA

[Us] Rated Supply Voltage

100...240 V AC

Local Signalling

1 LED (green) for PWR 1 LED (green) for RUN 1 LED (red) for module error (ERR) 1 LED (green) for SD card access (SD) 1 LED (red) for BAT 1 LED (green) for SL1 1 LED per channel (green) for I/O state 2 LEDs (green) for communication (LK/ACT 10/100)

Mounting Support

Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 plate or panel with fixing kit conforming to IEC 60715

Pollution Degree

<= 2

Discrete Input Number

I2...I5: 4 fast input I0, I1, I6, I7: 4 high speed input I8...I13: 6 regular input

Discrete Input Voltage

24 V

Discrete Input Current

7 mA for input

Input Impedance

3.3 kOhm for discrete input

Discrete Input Logic

Sink or source (positive/negative) type 1 conforming to IEC 61131-2

Discrete Output Number

10 relay

Discrete Output Current

2 A

Sensor Power Supply

24 V DC at 250 mA supplied by the controller

Insulation

Non-insulated between inputs Between output and internal logic at 1780 V AC Between output groups at 1780 V AC Between supply and internal logic at 1780 V AC Between input and internal logic at 500 V AC Between fast input and internal logic at 500 V AC Between input groups at 500 V AC

Network Frequency

50/60 Hz

Communication Port Protocol

USB port: USB - SoMachine-Network Non isolated serial link: Modbus master/slave - RTU/ASCII or SoMachine-Network Ethernet Modbus TCP/IP: Modbus TCP/IP client/server

Mechanical Durability

20000000 cycles for relay output

Electrical Durability

100000 cycles AC-12, 240 V, 480 VA, resistive 100000 cycles DC-12, 24 V, 48 W, resistive

Marking

Electromagnetic Compatibility

Electrostatic discharge immunity test - test level: 8 kV (air discharge) conforming to IEC 61000-4-2 Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2 Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3 Magnetic field at power frequency - test level: 30 A/m conforming to IEC 61000-4-8 Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 2 kV (relay output) conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV (I/O) conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV (serial link) conforming to IEC 61000-4-4 1.2/50 µs shock waves immunity test - test level: 1 kV (power lines (DC)) conforming to IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 2 kV (power lines (AC)) conforming to IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 2 kV (relay output) conforming to IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 1 kV (I/O) conforming to IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 1 kV (shielded cable) conforming to IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 0.5 kV (power lines (DC)) conforming to IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 1 kV (power lines (AC)) conforming to IEC 61000-4-5 Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6 Conducted emission - test level: 79 dBμV/m QP/66 dBμV/m AV (power lines (AC)) conforming to IEC 55011 Conducted emission - test level: 73 dBμV/m QP/60 dBμV/m AV (power lines (AC)) conforming to IEC 55011 Radiated emission - test level: 40 dBμV/m QP class A (10 m) conforming to IEC 55011 Radiated emission - test level: 47 dBμV/m QP class A (10 m) conforming to IEC 55011 Electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4

Shock Resistance

15 gn for 11 ms 30 gn for 6 ms

Vibration Resistance

3.5 mm at 5…8.4 Hz on symmetrical rail 1 gn at 8.4…150 Hz on symmetrical rail 3.5 mm at 5…8.7 Hz on panel mounting 2 gn at 8.7…150 Hz on panel mounting

Immunity To Microbreaks

10 ms

Supply Voltage Limits

85…264 V

Response Time

5 µs turn-off, I0, I1, I6, I7 terminal(s) for high speed input 5 µs turn-on, I0, I1, I6, I7 terminal(s) for high speed input 100 µs turn-off, I2...I5 terminal(s) for fast input 35 µs turn-on, I2...I5 terminal(s) for fast input 10 ms turn-off, Q0...Q9 terminal(s) for relay output 10 ms turn-on, Q0...Q9 terminal(s) for relay output 100 µs turn-off, I8...I13 terminal(s) for regular input 35 µs turn-on, I8...I13 terminal(s) for regular input

Backup Time

3 years at 25 °C (by interruption of power supply)

Clock Drift

<= 90 s/month at 25 °C

Power Consumption In Va

52…64 VA at 100...240 V AC (with max I/O)

Voltage State 1 Guaranteed

>= 15 V for input

Voltage State 0 Guaranteed

<= 5 V for input

Output Voltage Limits

30 V DC 250 V AC

Integrated Connection Type

USB port with mini B USB 2.0 connector Non isolated serial link serial 1 with terminal block connector and RS485 interface Non isolated serial link serial 2 with terminal block connector and RS232/RS485 interface Ethernet Modbus TCP/IP Ethernet with RJ45 connector and 1 Ethernet port 10/100BASE-T interface Isolated serial link serial 2 with terminal block connector and RS485 interface

Inrush Current

50 A

Switching Frequency

0.1 Hz with maximum load

Electrical Connection

Mini B USB 2.0 connectorfor a programming terminal RJ45 connectorfor connecting Ethernet network removable screw terminal blockfor inputs removable screw terminal blockfor outputs removable screw terminal block, 4 terminal(s) for connecting the serial link1 removable screw terminal block, 3 terminal(s) for connecting the 100-240 V AC power supply

Discrete Output Type

Relay normally open

Maximum Cable Distance Between Devices

Unshielded cable: <50 m for input Shielded cable: <10 m for fast input Shielded cable: <10 m for high speed input Unshielded cable: <150 m for output

Discrete I/O Number

Discrete Input Voltage Type

Storage Altitude

0…3000 m

Discrete Output Voltage

24 V DC 220 V AC

Maximum Number Of I/O Expansion Module

4 with 128 discrete output(s) for transistor output 4 with 74 discrete output(s) for relay output

Configurable Filtering Time

0 ms for input 3 ms for input 12 ms for input

Maximum Current Per Output Common

4 A at COM 2 4 A at COM 0 4 A at COM 1

Memory Capacity

512 byte internal flash for backup of programs

Data Storage Equipment

32 GB micro SD card (optional)

Battery Type

BR2032 Li-CFx (Lithium-Carbon Monofluoride), battery life: 5 year(s)

Execution Time For 1 Kinstruction

0.3 ms for event and periodic task

Execution Time Per Instruction

0.2 µs Boolean

Exct Time For Event Task

60 µs response time

Regulation Loop

Adjustable PID regulator up to 14 simultaneous loops

Counting Input Number

4 fast input (HSC mode) at 100 kHz 32 bits

Transmission Rate

1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 12 Mbit/s for USB 10/100 Mbit/s for bus length of 100 m for Ethernet Modbus TCP/IP

Minimum Load

10 mA at 5 V DC for relay output

Control Signal Type

Quadrature (x1, x2, x4) at 100 kHz for fast input (HSC mode) Pulse/direction at 100 kHz for fast input (HSC mode) Single phase at 100 kHz for fast input (HSC mode) CW/CCW at 100 kHz for fast input (HSC mode)

รายละเอียดสินค้า

฿ 17,585

ปริมาณ: