Piecal

Calibrators

calibrators

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

电子测试 & 测量

Electrical Testing & Measuring 

electrical testing & measuring 

Pengujian & Pengukuran Listrik

Ujian & Ukuran Elektrik

การทดสอบและการวัดทางไฟฟ้า

electrical-testing-measuring

Piecal 820 Multifunction Process Calibrator 

Lighten up your toolbox
Pocket sized calibrator replaces toolbox of single function devices

Technician friendly operation
Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.

Use it as a milliamp and voltage calibrator
Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV
Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV
Simulate 2 Wire transmitters
Power up transmitters and loops with built-in 24 V power supply
Simplify HART hook ups with built in 250 ohm resistor

Calibrate directly in temperature (°C & °F)
The PIE 820 works with the instruments you use.
Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)
RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm

Checkout flow and vibration systems
Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99
Hz, 9999.9 Hz, 20.000 kHz

Troubleshoot loop & wiring problems
Beep out connections with the built-in continuity checker

Easy to read
Turn on the backlight & easily see the display in dark areas of the plant

Quickly set any three outputs plus automatic stepping & ramping
Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch.
Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span.
Select RAMP to smoothly increase and decrease the output between Zero and Span.
Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds

<h3 class="md-block-header-three">Piecal 820 Multifunction Process Calibrator </h3><ul class="md-block-unordered-list-item"><li>Lighten up your toolbox Pocket sized calibrator replaces toolbox of single function devices</li><li>Technician friendly operation Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.</li><li>Use it as a milliamp and voltage calibrator Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV Simulate 2 Wire transmitters Power up transmitters and loops with built-in 24 V power supply Simplify HART hook ups with built in 250 ohm resistor</li><li>Calibrate directly in temperature (°C &amp; °F) The PIE 820 works with the instruments you use. Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) &amp; 1000 Ohm (3850) Copper 10 &amp; 50 Ohm, Nickel 110 and 120 Ohm</li><li>Checkout flow and vibration systems Source &amp; read frequency to 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz, 20.000 kHz</li><li>Troubleshoot loop &amp; wiring problems Beep out connections with the built-in continuity checker</li><li>Easy to read Turn on the backlight &amp; easily see the display in dark areas of the plant</li><li>Quickly set any three outputs plus automatic stepping &amp; ramping Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch. Choose between 2, 3, 5 &amp; 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds</li></ul>

<h3>Piecal 820 Multifunction Process Calibrator&nbsp;</h3>
<ul>
<li>Lighten up your toolbox 
Pocket sized calibrator replaces toolbox of single function devices</li>
<li>Technician friendly operation 
Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads.</li>
<li>Use it as a milliamp and voltage calibrator 
Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV 
Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV 
Simulate 2 Wire transmitters 
Power up transmitters and loops with built-in 24 V power supply 
Simplify HART hook ups with built in 250 ohm resistor</li>
<li>Calibrate directly in temperature (°C &amp; °F) 
The PIE 820 works with the instruments you use. 
Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II) 
RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) &amp; 1000 Ohm (3850) 
Copper 10 &amp; 50 Ohm, Nickel 110 and 120 Ohm</li>
<li>Checkout flow and vibration systems 
Source &amp; read frequency to 2000 CPM (Counts-Per-Minute), 999.99 
Hz, 9999.9 Hz, 20.000 kHz</li>
<li>Troubleshoot loop &amp; wiring problems 
Beep out connections with the built-in continuity checker</li>
<li>Easy to read 
Turn on the backlight &amp; easily see the display in dark areas of the plant</li>
<li>Quickly set any three outputs plus automatic stepping &amp; ramping 
Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch. 
Choose between 2, 3, 5 &amp; 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. 
Select RAMP to smoothly increase and decrease the output between Zero and Span. 
Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds</li>
</ul>