BIMED

Hawke

MISUMI

Murr Elektronik

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Electricals

electricals

Cable Gland

cable-gland

Emergency Stop Push Buttons

emergency-stop-push-buttons

Fasteners

fasteners

Knob Screws

knob-screws

Plumbing & Sanitary

plumbing-sanitary

Pipe Adaptor

pipe-adaptor

Bimed HDPT13B Gland With Locknut 6-12MM PG-13.5

Ingress Protection Rating	IP 68 - 5 Bar, 30 min

UL Environmental Rating	TYPE 4X acc. to UL 50E

Operating Temperature	Permanent	Intermittent

Other thread types also available upon request.

We recommend the use of threaded holes and/or the use of special EMC -

lock nuts to ensure high quality EMC contact quality.

O-ring available in Metric and PG threads as a standard. For NPT -

Other lock nut types also available upon request.

Clamping Range Outer Sheath Ø min - max	6,0 - 12,0 mm

<h3 class="md-block-header-three"><strong class="md-inline-bold">Bimed HDPT13B Gland With Locknut 6-12MM PG-13.5</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Products specifications</strong></p><ul class="md-block-unordered-list-item"><li>Material	Body , Cap	Brass Nickel plated</li></ul><p class="md-block-unstyled">		Seal	CR ( Chloroprene )</p><p class="md-block-unstyled">		Clamping Insert	PA 6 (Polyamide 6)</p><p class="md-block-unstyled">		Contact Spring	Special Copper Alloy</p><p class="md-block-unstyled">		O-Ring	NBR</p><ul class="md-block-unordered-list-item"><li>Ingress Protection Rating	IP 68 - 5 Bar, 30 min</li><li>UL Environmental Rating	TYPE 4X acc. to UL 50E</li><li>Flammability	V2 according to UL94</li><li>Operating Temperature	Permanent	Intermittent</li><li>-20 °C to +100 °C	-40 °C to +150 °C</li><li>Thread Type</li><li>Metric EN 60423</li><li>PG DIN 40430</li><li>NPT ANSI B1.20.1</li><li>Other thread types also available upon request.</li><li>Cable Type	Shielded</li><li>Accessories	EMC Lock nuts</li><li>Dome plugs</li><li>Gaskets ( Washers )</li><li>Remarks	In compliance with DIN EN 62444.</li><li>We recommend the use of threaded holes and/or the use of special EMC -</li><li>lock nuts to ensure high quality EMC contact quality.</li><li>Some approvals do not cover all sizes.</li><li>O-ring available in Metric and PG threads as a standard. For NPT -</li><li>threads O-ring available upon request.</li><li>Accessories must be ordered separately.</li><li>Other lock nut types also available upon request.</li><li>Outer	Thread Size (Male)	PG 13,5</li></ul><p class="md-block-unstyled">	Thread Length (TL)	10,0 mm</p><p class="md-block-unstyled">	Ø (D)	24,5 mm</p><ul class="md-block-unordered-list-item"><li>Clamping Range Outer Sheath Ø min - max	6,0 - 12,0 mm</li><li>Shield Diameter Ø min-max	5,0 - 10,0 mm</li><li>Spanner Width	Cap	22 mm</li><li>Body	22 mm</li><li>max. Height (H)	26,5 mm</li><li>Part Number	BSEN-04</li></ul>

<h3><strong>Bimed HDPT13B Gland With Locknut 6-12MM PG-13.5</strong></h3>
<p><strong>Products specifications</strong></p>
<ul>
<li>Material	Body , Cap	Brass Nickel plated</li>
</ul>
<p>		Seal	CR ( Chloroprene )</p>
<p>		Clamping Insert	PA 6 (Polyamide 6)</p>
<p>		Contact Spring	Special Copper Alloy</p>
<p>		O-Ring	NBR</p>
<ul>
<li>Ingress Protection Rating	IP 68 - 5 Bar, 30 min</li>
<li>UL Environmental Rating	TYPE 4X acc. to UL 50E</li>
<li>Flammability	V2 according to UL94</li>
<li>Operating Temperature	Permanent	Intermittent</li>
<li>-20 °C to +100 °C	-40 °C to +150 °C</li>
<li>Thread Type</li>
<li>Metric EN 60423</li>
<li>PG DIN 40430</li>
<li>NPT ANSI B1.20.1</li>
<li>Other thread types also available upon request.</li>
<li>Cable Type	Shielded</li>
<li>Accessories	EMC Lock nuts</li>
<li>Dome plugs</li>
<li>Gaskets ( Washers )</li>
<li>Remarks	In compliance with DIN EN 62444.</li>
<li>We recommend the use of threaded holes and/or the use of special EMC -</li>
<li>lock nuts to ensure high quality EMC contact quality.</li>
<li>Some approvals do not cover all sizes.</li>
<li>O-ring available in Metric and PG threads as a standard. For NPT -</li>
<li>threads O-ring available upon request.</li>
<li>Accessories must be ordered separately.</li>
<li>Other lock nut types also available upon request.</li>
<li>Outer	Thread Size (Male)	PG 13,5</li>
</ul>
<p>	Thread Length (TL)	10,0 mm</p>
<p>	Ø (D)	24,5 mm</p>
<ul>
<li>Clamping Range Outer Sheath Ø min - max	6,0 - 12,0 mm</li>
<li>Shield Diameter Ø min-max	5,0 - 10,0 mm</li>
<li>Spanner Width	Cap	22 mm</li>
<li>Body	22 mm</li>
<li>max. Height (H)	26,5 mm</li>
<li>Part Number	BSEN-04</li>
</ul>


Jimmy Foo

SCHNEIDER ELECTRIC

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Contactors

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

buyerIntroduction

bimed hdpt13b gland locknut 6-12mm pg-13.5 kelenjar dengan mur pengunci cable kabel bimed/医学医学 压盖带锁紧螺母 电缆接头 医学医学

bimed-hdpt13b-gland-with-locknut-6-12mm-pg-13-5

We recommend the use of lock nuts and gaskets to ensure IP rating for -

Other colours on request: RAL 5015 (blue) , RAL 9003 (white) , RAL 3020 (red)

Clamping Range Outer Sheath Ø min - max	13,0 - 18,0 mm

<h3 class="md-block-header-three"><strong class="md-inline-bold">Bimed HDPT13B Gland With Locknut 13-18MM</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Product Information :</strong></p><ul class="md-block-unordered-list-item"><li>Material	Body , Cap	PA 6 (Polyamide 6)</li></ul><p class="md-block-unstyled">		               Seal	CR ( Chloroprene )</p><ul class="md-block-unordered-list-item"><li>Ingress Protection Rating</li><li>IP 68 - 5 Bar, 30 min</li><li>IP 66</li><li>Flammability	V2 according to UL94</li><li>Operating Temperature	Permanent	Intermittent</li><li>-20 °C to +100 °C	-30 °C to +150 °C</li><li>Thread Type</li><li>Metric EN 60423</li><li>PG DIN 40430</li><li>NPT ANSI B1.20.1</li><li>Gas ISO 228</li><li>Other thread types also available upon request.</li><li>Cable Type	Non Armoured</li><li>Accessories	Lock nuts</li><li>Dome plugs</li><li>Reducing seals</li><li>Flat cable seals</li><li>Multihole seals</li><li>Gaskets ( Washers )</li><li>Remarks	In compliance with DIN EN 62444.</li><li>We recommend the use of lock nuts and gaskets to ensure IP rating for -</li><li>rough surfaces or through holes.</li><li>Accessories must be ordered separately.</li><li>Some approvals do not cover all sizes.</li><li>Other colours on request: RAL 5015 (blue) , RAL 9003 (white) , RAL 3020 (red)</li><li>Outer	Thread Size (Male)	M25x1,5</li><li>Thread Length (TL)	10,0 mm</li><li>Ø (D)	37,2 mm</li><li>Clamping Range Outer Sheath Ø min - max	13,0 - 18,0 mm</li><li>Spanner Width	Cap	33 mm</li><li>Body	33 mm</li><li>max. Height (H)	38,4 mm</li><li>Part Number	RAL 7035 light grey	BM-15</li><li>RAL 7001 grey	BM-05</li><li>RAL 9005 black	BM-25</li></ul>

<h3><strong>Bimed HDPT13B Gland With Locknut 13-18MM</strong></h3>
<p><strong>Product Information :</strong></p>
<ul>
<li>Material	Body , Cap	PA 6 (Polyamide 6)</li>
</ul>
<p>		               Seal	CR ( Chloroprene )</p>
<ul>
<li>Ingress Protection Rating</li>
<li>IP 68 - 5 Bar, 30 min</li>
<li>IP 66</li>
<li>Flammability	V2 according to UL94</li>
<li>Operating Temperature	Permanent	Intermittent</li>
<li>-20 °C to +100 °C	-30 °C to +150 °C</li>
<li>Thread Type</li>
<li>Metric EN 60423</li>
<li>PG DIN 40430</li>
<li>NPT ANSI B1.20.1</li>
<li>Gas ISO 228</li>
<li>Other thread types also available upon request.</li>
<li>Cable Type	Non Armoured</li>
<li>Accessories	Lock nuts</li>
<li>Dome plugs</li>
<li>Reducing seals</li>
<li>Flat cable seals</li>
<li>Multihole seals</li>
<li>Gaskets ( Washers )</li>
<li>Remarks	In compliance with DIN EN 62444.</li>
<li>We recommend the use of lock nuts and gaskets to ensure IP rating for -</li>
<li>rough surfaces or through holes.</li>
<li>Accessories must be ordered separately.</li>
<li>Some approvals do not cover all sizes.</li>
<li>Other colours on request: RAL 5015 (blue) , RAL 9003 (white) , RAL 3020 (red)</li>
<li>Outer	Thread Size (Male)	M25x1,5</li>
<li>Thread Length (TL)	10,0 mm</li>
<li>Ø (D)	37,2 mm</li>
<li>Clamping Range Outer Sheath Ø min - max	13,0 - 18,0 mm</li>
<li>Spanner Width	Cap	33 mm</li>
<li>Body	33 mm</li>
<li>max. Height (H)	38,4 mm</li>
<li>Part Number	RAL 7035 light grey	BM-15</li>
<li>RAL 7001 grey	BM-05</li>
<li>RAL 9005 black	BM-25</li>
</ul>


Bimed HDPT13B Gland With Locknut 13-18MM

bimed hdpt13b gland locknut 13-18mm kelenjar dengan mur pengunci cable kabel bimed/医学医学 带锁紧螺母的压盖 电缆接头 医学医学

bimed-hdpt13b-gland-with-locknut-13-18mm

		              Clamping Insert	PA 6 (Polyamide 6)

		              Contact Spring	Special Copper Alloy

UL Environmental Rating	TYPE 4X, 12, 13 acc. to UL 50E

Clamping Range Outer Sheath Ø min - max	7,5 - 14,0 mm

Part Number Mandatory	Gasket (Washer) Option	EMC Loc k Nut Option	Sealing Plug Option

See table	WC Chloroprene WS Silicone	EL EMC Loc k nut	P Dome Plug T Dust Plug

<h3 class="md-block-header-three"><strong class="md-inline-bold">Bimed HDPT13B Gland With Locknut 4-8MM</strong></h3><ul class="md-block-unordered-list-item"><li>Material	Body , Cap	Brass Nickel plated</li></ul><p class="md-block-unstyled">		              Seal	CR ( Chloroprene )</p><p class="md-block-unstyled">		              Clamping Insert	PA 6 (Polyamide 6)</p><p class="md-block-unstyled">		              Contact Spring	Special Copper Alloy</p><p class="md-block-unstyled">		              O-Ring	NBR</p><ul class="md-block-unordered-list-item"><li>Ingress Protection Rating	IP 68 - 5 Bar, 30 min</li><li>UL Environmental Rating	TYPE 4X, 12, 13 acc. to UL 50E</li><li>Flammability	V2 according to UL94</li><li>Operating Temperature	Permanent	Intermittent</li><li>-20 °C to +100 °C	-40 °C to +150 °C</li><li>Thread Type</li><li>Metric EN 60423</li><li>PG DIN 40430</li><li>NPT ANSI B1.20.1</li><li>Other thread types also available upon request.</li><li>Cable Type	Shielded</li><li>Accessories	EMC Lock nuts</li><li>Dome plugs</li><li>Gaskets ( Washers )</li><li>Remarks	In compliance with DIN EN 62444.</li><li>We recommend the use of lock nuts and gaskets to ensure IP rating for -</li><li>rough surfaces or through holes.</li><li>Some approvals do not cover all sizes.</li><li>O-ring available in Metric and PG threads as a standard. For NPT -</li><li>threads O-ring available upon request.</li><li>Accessories must be ordered separately.</li><li>Other lock nut types also available upon request.</li><li>Outer	Thread Size (Male)	M20x1,5</li></ul><p class="md-block-unstyled">	              Thread Length (TL)	8,0 mm</p><p class="md-block-unstyled">	              Ø (D)	26,8 mm</p><ul class="md-block-unordered-list-item"><li>Clamping Range Outer Sheath Ø min - max	7,5 - 14,0 mm</li><li>Shield Diameter Ø min-max	5,5 - 11,5 mm</li><li>Spanner Width	Cap	24 mm</li><li>Body	24 mm</li><li>max. Height (H)	41,5 mm</li><li>Part Number	BMEM-E2(M20T)</li><li>Order Coding</li><li>Part Number Mandatory	Gasket (Washer) Option	EMC Loc k Nut Option	Sealing Plug Option</li><li>See table	WC Chloroprene WS Silicone	EL EMC Loc k nut	P Dome Plug T Dust Plug</li><li>Example</li><li>BMEM-E2(M20T)	WC	EL	P</li><li>RELATED ACCESSORIES</li></ul>

<h3><strong>Bimed HDPT13B Gland With Locknut 4-8MM</strong></h3>
<ul>
<li>Material	Body , Cap	Brass Nickel plated</li>
</ul>
<p>		              Seal	CR ( Chloroprene )</p>
<p>		              Clamping Insert	PA 6 (Polyamide 6)</p>
<p>		              Contact Spring	Special Copper Alloy</p>
<p>		              O-Ring	NBR</p>
<ul>
<li>Ingress Protection Rating	IP 68 - 5 Bar, 30 min</li>
<li>UL Environmental Rating	TYPE 4X, 12, 13 acc. to UL 50E</li>
<li>Flammability	V2 according to UL94</li>
<li>Operating Temperature	Permanent	Intermittent</li>
<li>-20 °C to +100 °C	-40 °C to +150 °C</li>
<li>Thread Type</li>
<li>Metric EN 60423</li>
<li>PG DIN 40430</li>
<li>NPT ANSI B1.20.1</li>
<li>Other thread types also available upon request.</li>
<li>Cable Type	Shielded</li>
<li>Accessories	EMC Lock nuts</li>
<li>Dome plugs</li>
<li>Gaskets ( Washers )</li>
<li>Remarks	In compliance with DIN EN 62444.</li>
<li>We recommend the use of lock nuts and gaskets to ensure IP rating for -</li>
<li>rough surfaces or through holes.</li>
<li>Some approvals do not cover all sizes.</li>
<li>O-ring available in Metric and PG threads as a standard. For NPT -</li>
<li>threads O-ring available upon request.</li>
<li>Accessories must be ordered separately.</li>
<li>Other lock nut types also available upon request.</li>
<li>Outer	Thread Size (Male)	M20x1,5</li>
</ul>
<p>	              Thread Length (TL)	8,0 mm</p>
<p>	              Ø (D)	26,8 mm</p>
<ul>
<li>Clamping Range Outer Sheath Ø min - max	7,5 - 14,0 mm</li>
<li>Shield Diameter Ø min-max	5,5 - 11,5 mm</li>
<li>Spanner Width	Cap	24 mm</li>
<li>Body	24 mm</li>
<li>max. Height (H)	41,5 mm</li>
<li>Part Number	BMEM-E2(M20T)</li>
<li>Order Coding</li>
<li>Part Number Mandatory	Gasket (Washer) Option	EMC Loc k Nut Option	Sealing Plug Option</li>
<li>See table	WC Chloroprene WS Silicone	EL EMC Loc k nut	P Dome Plug T Dust Plug</li>
<li>Example</li>
<li>BMEM-E2(M20T)	WC	EL	P</li>
<li>RELATED ACCESSORIES</li>
</ul>


Bimed HDPT13B Gland With Locknut 4-8MM

bimed hdpt13b gland locknut 4-8mm kelenjar dengan mur pengunci cable kabel bimed/医学医学 带锁紧螺母的压盖 电缆接头 医学医学

bimed-hdpt13b-gland-with-locknut-4-8mm

Material	Body , Cap	PA 6 (Polyamide 6) (R22, HL3 and R23, HL3)

		              Seal	EPDM (R22, HL3 and R23, HL3)

Manufactured according to DIN EN 62444/50262.

Other colours on request: RAL 7001 (grey), RAL 9005 (black)

	              Thread Length (TL)	10,0 mm

Clamping Range Outer Sheath Ø min - max	10,0 - 14,0 mm

<h3 class="md-block-header-three"><strong class="md-inline-bold">Bimed HDPT13B Gland With Locknut 5-10MM</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Product Information :</strong></p><ul class="md-block-unordered-list-item"><li>Material	Body , Cap	PA 6 (Polyamide 6) (R22, HL3 and R23, HL3)</li></ul><p class="md-block-unstyled">		              Seal	EPDM (R22, HL3 and R23, HL3)</p><ul class="md-block-unordered-list-item"><li>Ingress Protection Rating</li><li>IP 68 - 5 Bar, 30 min</li><li>IP 66</li><li>Flammability	R22 acc. to EN45545-2</li><li>R23 acc. to EN45545-2</li><li>HL2 acc. to EN45545-2</li><li>HL3 acc. to EN45545-2</li><li>Operating Temperature	EPDM</li><li>-40 °C to +100 °C</li><li>Thread Type</li><li>Metric EN 60423</li><li>PG DIN 40430</li><li>Other thread types also available upon request.</li><li>Cable Type	Non Armoured</li><li>Accessories	Lock nuts</li><li>Dome plugs</li><li>Reducing seals</li><li>Flat cable seals</li><li>Multihole seals</li><li>Gaskets ( Washers )</li><li>Manufactured according to DIN EN 62444/50262.</li><li>We recommend the use of lock nuts and gaskets to ensure IP rating for -</li><li>rough surfaces or through holes.</li><li>Some approvals do not cover all sizes.</li><li>Accessories must be ordered separately.</li><li>Other colours on request: RAL 7001 (grey), RAL 9005 (black)</li><li>Outer	Thread Size (Male)	M20x1,5</li></ul><p class="md-block-unstyled">	              Thread Length (TL)	10,0 mm</p><p class="md-block-unstyled">	              Ø (D)	30,9 mm</p><ul class="md-block-unordered-list-item"><li>Clamping Range Outer Sheath Ø min - max	10,0 - 14,0 mm</li><li>Spanner Width	Cap	27 mm</li><li>Body	27 mm</li><li>max. Height (H)	31,9 mm</li><li>Part Number RAL 7035 light grey	R-BM-13</li></ul>

<h3><strong>Bimed HDPT13B Gland With Locknut 5-10MM</strong></h3>
<p><strong>Product Information :</strong></p>
<ul>
<li>Material	Body , Cap	PA 6 (Polyamide 6) (R22, HL3 and R23, HL3)</li>
</ul>
<p>		              Seal	EPDM (R22, HL3 and R23, HL3)</p>
<ul>
<li>Ingress Protection Rating</li>
<li>IP 68 - 5 Bar, 30 min</li>
<li>IP 66</li>
<li>Flammability	R22 acc. to EN45545-2</li>
<li>R23 acc. to EN45545-2</li>
<li>HL2 acc. to EN45545-2</li>
<li>HL3 acc. to EN45545-2</li>
<li>Operating Temperature	EPDM</li>
<li>-40 °C to +100 °C</li>
<li>Thread Type</li>
<li>Metric EN 60423</li>
<li>PG DIN 40430</li>
<li>Other thread types also available upon request.</li>
<li>Cable Type	Non Armoured</li>
<li>Accessories	Lock nuts</li>
<li>Dome plugs</li>
<li>Reducing seals</li>
<li>Flat cable seals</li>
<li>Multihole seals</li>
<li>Gaskets ( Washers )</li>
<li>Manufactured according to DIN EN 62444/50262.</li>
<li>We recommend the use of lock nuts and gaskets to ensure IP rating for -</li>
<li>rough surfaces or through holes.</li>
<li>Some approvals do not cover all sizes.</li>
<li>Accessories must be ordered separately.</li>
<li>Other colours on request: RAL 7001 (grey), RAL 9005 (black)</li>
<li>Outer	Thread Size (Male)	M20x1,5</li>
</ul>
<p>	              Thread Length (TL)	10,0 mm</p>
<p>	              Ø (D)	30,9 mm</p>
<ul>
<li>Clamping Range Outer Sheath Ø min - max	10,0 - 14,0 mm</li>
<li>Spanner Width	Cap	27 mm</li>
<li>Body	27 mm</li>
<li>max. Height (H)	31,9 mm</li>
<li>Part Number RAL 7035 light grey	R-BM-13</li>
</ul>


Bimed HDPT13B Gland With Locknut 5-10MM

bimed hdpt13b gland locknut 5-10mm kelenjar dengan mur pengunci cable kabel bimed/医学医学 带锁紧螺母的压盖 电缆接头 医学医学

bimed-hdpt13b-gland-with-locknut-5-10mm

Remarks	Manufactured according to DIN EN 62444/50262.

Part Number Mandatory	Gasket (Washer) Option	Sealing Plug Option	Lock Nut Option

<h3 class="md-block-header-three"><strong class="md-inline-bold">Bimed HDPT13B Gland With Locknut 10-14MM</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Products specifications</strong></p><ul class="md-block-unordered-list-item"><li>Material	Body , Cap	PA 6 (Polyamide 6) (R22, HL3 and R23, HL3)</li></ul><p class="md-block-unstyled">		              Seal	EPDM (R22, HL3 and R23, HL3)</p><ul class="md-block-unordered-list-item"><li>Ingress Protection Rating</li><li>IP 68 - 5 Bar, 30 min</li><li>IP 66</li><li>Flammability	R22 acc. to EN45545-2</li><li>R23 acc. to EN45545-2</li><li>HL2 acc. to EN45545-2</li><li>HL3 acc. to EN45545-2</li><li>Operating Temperature	EPDM</li><li>-40 °C to +100 °C</li><li>Thread Type</li><li>Metric EN 60423</li><li>PG DIN 40430</li><li>Other thread types also available upon request.</li><li>Cable Type	Non Armoured</li><li>Accessories	Lock nuts</li><li>Dome plugs</li><li>Reducing seals</li><li>Flat cable seals</li><li>Multihole seals</li><li>Gaskets ( Washers )</li><li>Remarks	Manufactured according to DIN EN 62444/50262.</li><li>We recommend the use of lock nuts and gaskets to ensure IP rating for -</li><li>rough surfaces or through holes.</li><li>Some approvals do not cover all sizes.</li><li>Accessories must be ordered separately.</li><li>Other colours on request: RAL 7001 (grey), RAL 9005 (black)</li><li>Outer	Thread Size (Male)	M20x1,5</li><li>Thread Length (TL)	10,0 mm</li><li>Ø (D)	30,9 mm</li><li>Clamping Range Outer Sheath Ø min - max	10,0 - 14,0 mm</li><li>Spanner Width	Cap	27 mm</li><li>Body	27 mm</li><li>max. Height (H)	31,9 mm</li><li>Part Number RAL 7035 light grey	R-BM-13</li><li>Order Coding</li><li>Part Number Mandatory	Gasket (Washer) Option	Sealing Plug Option	Lock Nut Option</li><li>See table	WE EPDM	P Dome Plug	L Lock nut</li><li>Example</li><li>R-BM-03	WE	P	L</li></ul>

<h3><strong>Bimed HDPT13B Gland With Locknut 10-14MM</strong></h3>
<p><strong>Products specifications</strong></p>
<ul>
<li>Material	Body , Cap	PA 6 (Polyamide 6) (R22, HL3 and R23, HL3)</li>
</ul>
<p>		              Seal	EPDM (R22, HL3 and R23, HL3)</p>
<ul>
<li>Ingress Protection Rating</li>
<li>IP 68 - 5 Bar, 30 min</li>
<li>IP 66</li>
<li>Flammability	R22 acc. to EN45545-2</li>
<li>R23 acc. to EN45545-2</li>
<li>HL2 acc. to EN45545-2</li>
<li>HL3 acc. to EN45545-2</li>
<li>Operating Temperature	EPDM</li>
<li>-40 °C to +100 °C</li>
<li>Thread Type</li>
<li>Metric EN 60423</li>
<li>PG DIN 40430</li>
<li>Other thread types also available upon request.</li>
<li>Cable Type	Non Armoured</li>
<li>Accessories	Lock nuts</li>
<li>Dome plugs</li>
<li>Reducing seals</li>
<li>Flat cable seals</li>
<li>Multihole seals</li>
<li>Gaskets ( Washers )</li>
<li>Remarks	Manufactured according to DIN EN 62444/50262.</li>
<li>We recommend the use of lock nuts and gaskets to ensure IP rating for -</li>
<li>rough surfaces or through holes.</li>
<li>Some approvals do not cover all sizes.</li>
<li>Accessories must be ordered separately.</li>
<li>Other colours on request: RAL 7001 (grey), RAL 9005 (black)</li>
<li>Outer	Thread Size (Male)	M20x1,5</li>
<li>Thread Length (TL)	10,0 mm</li>
<li>Ø (D)	30,9 mm</li>
<li>Clamping Range Outer Sheath Ø min - max	10,0 - 14,0 mm</li>
<li>Spanner Width	Cap	27 mm</li>
<li>Body	27 mm</li>
<li>max. Height (H)	31,9 mm</li>
<li>Part Number RAL 7035 light grey	R-BM-13</li>
<li>Order Coding</li>
<li>Part Number Mandatory	Gasket (Washer) Option	Sealing Plug Option	Lock Nut Option</li>
<li>See table	WE EPDM	P Dome Plug	L Lock nut</li>
<li>Example</li>
<li>R-BM-03	WE	P	L</li>
</ul>


Bimed HDPT13B Gland With Locknut 10-14MM

bimed hdpt13b gland locknut 10-14mm kelenjar dengan mur pengunci cable kabel bimed/医学医学 压盖带锁紧螺母 电缆接头 医学医学

bimed-hdpt13b-gland-with-locknut-10-14mm

Timing Belts

Suction cups

Timing Pulleys

Safety Fences

Pneumatic Guided Cylinders

Oil Free Bushings

Square End Mills 

Shaft Couplings

Electric Linear Actuators

Misumi 

Misumi C-NZWF5 Straight Grained Knob Female Thread, Mounting Section Dia. M: M5, Mounting Section, Length L: 9, Main Body Dia. D: 20, Main Body Height H [mm]:13.5, Mounting Section Type: Tapped

misumi c-nzwf5 straight grained knob female thread, mounting section dia. m: m5, section, length l: 9, main body d: 20, height [mm]:13.5, type: tapped benang wanita kenop berbutir lurus, diameter bagian pemasangan. pemasangan, panjang badan utama. tinggi utama [mm]:13,5, tipe pemasangan: disadap screws tombol lurus wanita, bahagian pemasangan jenis diketuk 直粒状旋钮内螺纹，安装截面直径m：m5，安装部分，长度l：9，主体直径。 d：20，主体高度 [毫米]：13.5，安装部分类型：螺纹 米思米

misumi-c-nzwf5-straight-grained-knob-female-thread-mounting-section-dia-m-m5-mounting-section-length-l-9-main-body-dia-d-20-main-body-height-h-mm-13-5-mounting-section-type-tapped

Bimed HDPT13B Gland With Locknut 18-25MM 

		              Seal	CR (Chloroprene) , Silicone

Ex e/tb / Ex tb	-40°C to +80°C	-60°C to +80°C

Gas & Dust potentially explosive atmospheres

Cable glands should be also used for intrinsically safe circuits Ex-i.

These cable glands shall have a light blue colored cap. The symbol " I" will -

be added beside of the "BM" for order processing.

BMD BM-X... CE 0722 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68

Ta-40°C +80°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X

Remarks	We recommend the use of locknuts and gaskets to ensure IP rating for rough

Clamping Range Outer Sheath Ø min - max	18,0 - 25,0 mm

<h3 class="md-block-header-three"><strong class="md-inline-bold">Bimed HDPT13B Gland With Locknut 18-25MM </strong></h3><ul class="md-block-unordered-list-item"><li>Material	Body , Cap	PA 6 (Polyamide 6)</li></ul><p class="md-block-unstyled">		              Seal	CR (Chloroprene) , Silicone</p><ul class="md-block-unordered-list-item"><li>Ingress Protection Rating</li><li>IP 68 - 5 Bar, 30 min</li><li>IP 66</li><li>Operating Temperature	Seal Material</li><li>CR (Chloroprene)	Silicone</li><li>Ex e/tb / Ex tb	-40°C to +80°C	-60°C to +80°C</li><li>Equipment For</li><li>Gas &amp; Dust potentially explosive atmospheres</li><li>Cable glands should be also used for intrinsically safe circuits Ex-i.</li><li>These cable glands shall have a light blue colored cap. The symbol &quot; I&quot; will -</li><li>be added beside of the &quot;BM&quot; for order processing.</li><li>Suitable for use in</li><li>Group II Gas Group IIC ZONE1/ZONE2</li><li>Group III Dust Group IIIC ZONE21/ZONE 22</li><li>Equipment Marking</li><li>Ex II 2GD</li><li>Ex eb IIC Gb Ex tb IIIC Db</li><li>Marking Example *</li><li>BMD BM-X... CE 0722 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68</li><li>Ta-40°C +80°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X</li><li>Impact Test Result	4J</li><li>Thread Type</li><li>Metric (M) ISO Pitch 1,5</li><li>NPT (N) ANSI ASME B1.20.1</li><li>PG (P) DIN 40430</li><li>Other thread types also available upon request.</li><li>Cable Type	Non Armoured</li><li>Accessories	Lock nuts</li><li>Gaskets ( Washers )</li><li>Dome plugs</li><li>Dust Plugs</li><li>Double Seals</li><li>Remarks	We recommend the use of locknuts and gaskets to ensure IP rating for rough</li><li>surfaces or through holes.</li><li>Accessories must be ordered separately.</li><li>Outer	Thread Size (Male)	M32x1,5</li><li>Thread Length (TL)	15,0 mm</li><li>Ø (D)	47,1 mm</li><li>Clamping Range Outer Sheath Ø min - max	18,0 - 25,0 mm</li><li>Spanner Width	Cap	42 mm</li><li>Body	42 mm</li><li>max. Height (H)	43,3 mm</li><li>Part Number	BM-X7</li></ul>

<h3><strong>Bimed HDPT13B Gland With Locknut 18-25MM </strong></h3>
<ul>
<li>Material	Body , Cap	PA 6 (Polyamide 6)</li>
</ul>
<p>		              Seal	CR (Chloroprene) , Silicone</p>
<ul>
<li>Ingress Protection Rating</li>
<li>IP 68 - 5 Bar, 30 min</li>
<li>IP 66</li>
<li>Operating Temperature	Seal Material</li>
<li>CR (Chloroprene)	Silicone</li>
<li>Ex e/tb / Ex tb	-40°C to +80°C	-60°C to +80°C</li>
<li>Equipment For</li>
<li>Gas &amp; Dust potentially explosive atmospheres</li>
<li>Cable glands should be also used for intrinsically safe circuits Ex-i.</li>
<li>These cable glands shall have a light blue colored cap. The symbol " I" will -</li>
<li>be added beside of the "BM" for order processing.</li>
<li>Suitable for use in</li>
<li>Group II Gas Group IIC ZONE1/ZONE2</li>
<li>Group III Dust Group IIIC ZONE21/ZONE 22</li>
<li>Equipment Marking</li>
<li>Ex II 2GD</li>
<li>Ex eb IIC Gb Ex tb IIIC Db</li>
<li>Marking Example *</li>
<li>BMD BM-X... CE 0722 2GD Ex eb IIC Gb Ex tb IIIC Db IP66/68</li>
<li>Ta-40°C +80°C IMQ 13 ATEX 010X IECEx IMQ 13.0003X</li>
<li>Impact Test Result	4J</li>
<li>Thread Type</li>
<li>Metric (M) ISO Pitch 1,5</li>
<li>NPT (N) ANSI ASME B1.20.1</li>
<li>PG (P) DIN 40430</li>
<li>Other thread types also available upon request.</li>
<li>Cable Type	Non Armoured</li>
<li>Accessories	Lock nuts</li>
<li>Gaskets ( Washers )</li>
<li>Dome plugs</li>
<li>Dust Plugs</li>
<li>Double Seals</li>
<li>Remarks	We recommend the use of locknuts and gaskets to ensure IP rating for rough</li>
<li>surfaces or through holes.</li>
<li>Accessories must be ordered separately.</li>
<li>Outer	Thread Size (Male)	M32x1,5</li>
<li>Thread Length (TL)	15,0 mm</li>
<li>Ø (D)	47,1 mm</li>
<li>Clamping Range Outer Sheath Ø min - max	18,0 - 25,0 mm</li>
<li>Spanner Width	Cap	42 mm</li>
<li>Body	42 mm</li>
<li>max. Height (H)	43,3 mm</li>
<li>Part Number	BM-X7</li>
</ul>


Bimed HDPT13B Gland With Locknut 18-25MM

bimed hdpt13b gland locknut 18-25mm kelenjar dengan mur pengunci cable kabel bimed/医学医学 带锁紧螺母的压盖 电缆接头 医学医学

bimed-hdpt13b-gland-with-locknut-18-25mm

Hawke 476A ADAPTOR 1/2"NPT(M)XM20(F) BRASS

The Hawke 476 metallic adaptor and reducer range is designed to increase or reduce entry thread sizes when mounted to a hazardous area enclosure. Dual Certified ATEX/IECEx (along with many more) for use in Flameproof (Exd), Increased Safety (Exe) and Dust (Ext) protection concepts. Also approved for use in Group I Mining Applications, and NEC Class I Div I Explosion proof.

Application: Hazardous Areas Zone 1, Zone 21, Zone 2, Zone 22 and Mining Applications

Material: Manufactured in Brass (Standard)

Operating Temperature: -60°C to +200 °C

<h3 class="md-block-header-three"><strong class="md-inline-bold">Hawke 476A ADAPTOR 1/2&quot;NPT(M)XM20(F) BRASS</strong></h3><p class="md-block-unstyled">The Hawke 476 metallic adaptor and reducer range is designed to increase or reduce entry thread sizes when mounted to a hazardous area enclosure. Dual Certified ATEX/IECEx (along with many more) for use in Flameproof (Exd), Increased Safety (Exe) and Dust (Ext) protection concepts. Also approved for use in Group I Mining Applications, and NEC Class I Div I Explosion proof.</p><ul class="md-block-unordered-list-item"><li>Metallic construction</li><li>Certified Exd, Exe &amp; Ext</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Specifications:</strong></p><ul class="md-block-unordered-list-item"><li>Application: Hazardous Areas Zone 1, Zone 21, Zone 2, Zone 22 and Mining Applications</li><li>Material: Manufactured in Brass (Standard)</li><li>Operating Temperature: -60°C to +200 °C</li><li>Series: Fittings for Hazardous Areas </li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Dimensions:</strong></p><ul class="md-block-unordered-list-item"><li>Length: 2 cm</li><li>Width: 2 cm</li><li>Height: 3.9 cm</li></ul>

<h3><strong>Hawke 476A ADAPTOR 1/2"NPT(M)XM20(F) BRASS</strong></h3>
<p>The Hawke 476 metallic adaptor and reducer range is designed to increase or reduce entry thread sizes when mounted to a hazardous area enclosure. Dual Certified ATEX/IECEx (along with many more) for use in Flameproof (Exd), Increased Safety (Exe) and Dust (Ext) protection concepts. Also approved for use in Group I Mining Applications, and NEC Class I Div I Explosion proof.</p>
<ul>
<li>Metallic construction</li>
<li>Certified Exd, Exe &amp; Ext</li>
</ul>
<p><strong>Specifications:</strong></p>
<ul>
<li>Application: Hazardous Areas Zone 1, Zone 21, Zone 2, Zone 22 and Mining Applications</li>
<li>Material: Manufactured in Brass (Standard)</li>
<li>Operating Temperature: -60°C to +200 °C</li>
<li>Series: Fittings for Hazardous Areas&nbsp;</li>
</ul>
<p><strong>Dimensions:</strong></p>
<ul>
<li>Length: 2 cm</li>
<li>Width: 2 cm</li>
<li>Height: 3.9 cm</li>
</ul>


Hawke 476A Adaptor 1/2"NPT(M)XM20(F) Brass

hawke 476a adaptor 1/2"npt(m)xm20(f) brass kuningan pipe pipa penyesuai loyang paip hawke/霍克 适配器 黄铜 霍克

hawke-476a-adaptor-1-2-npt-m-xm20-f-brass

Switching voltage AC max. (UL 60947): 30 V

Switching voltage DC max. (UL 60947): 30 V

Degree of protection front (EN IEC 60529): IP65

Degree of protection back (EN IEC 60529): IP65, IP67

Short circuit protective device (SCPD): Fuse 250 V / 0.1 A / 1.5 kA gG quick

UL enclosure type rating front side: Type 4X

Salt-spray resistance (IEC 60068-2-11): Yes

<h3 class="md-block-header-three"><strong class="md-inline-bold">Murr 69050 E-Stop 22 2NC M12(4)</strong> </h3><h3 class="md-block-header-three">Electrical Data | Supply</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Rated operating voltage AC-15</strong>: 35 V</li><li><strong class="md-inline-bold">Rated operating voltage DC-13</strong>: 35 V</li></ul><h3 class="md-block-header-three">Electrical Data | Input</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Short-circuit current</strong>: 1000 A</li></ul><h3 class="md-block-header-three">Electrical Data | Output</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Switching power max.</strong>: 0.25 W</li><li><strong class="md-inline-bold">Voltage switching AC min.</strong>: 1 V</li><li><strong class="md-inline-bold">Switching voltage AC max.</strong>: 35 V</li><li><strong class="md-inline-bold">Switching voltage AC max. (UL 60947)</strong>: 30 V</li><li><strong class="md-inline-bold">Voltage switching DC min.</strong>: 1 V</li><li><strong class="md-inline-bold">Switching voltage DC max.</strong>: 35 V</li><li><strong class="md-inline-bold">Switching voltage DC max. (UL 60947)</strong>: 30 V</li><li><strong class="md-inline-bold">Switching current min.</strong>: 1 mA</li><li><strong class="md-inline-bold">Switching current max.</strong>: 100 mA</li></ul><h3 class="md-block-header-three">Installation | Connection</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Family construction form</strong>: M12</li></ul><h3 class="md-block-header-three">Installation | Pin Assignment</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Coding</strong>: A</li><li><strong class="md-inline-bold">Number of poles</strong>: 4</li></ul><h3 class="md-block-header-three">Device Protection | Electrical</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Installation height max. ASL</strong>: 2000 m</li><li><strong class="md-inline-bold">Degree of protection front (EN IEC 60529)</strong>: IP65</li><li><strong class="md-inline-bold">Degree of protection back (EN IEC 60529)</strong>: IP65, IP67</li><li><strong class="md-inline-bold">Pollution Degree</strong>: 2</li><li><strong class="md-inline-bold">Short circuit protective device (SCPD)</strong>: Fuse 250 V / 0.1 A / 1.5 kA gG quick</li><li><strong class="md-inline-bold">Rated insulation voltage</strong>: 250 V</li><li><strong class="md-inline-bold">Overvoltage category (EN 60950-1)</strong>: II</li></ul><h3 class="md-block-header-three">Device Protection | Mechanical</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Mechanical endurance</strong>: 50,000 cycles</li><li><strong class="md-inline-bold">Mechanical endurance B10</strong>: 65,000 cycles</li><li><strong class="md-inline-bold">Operating life B10d</strong>: 84,500 cycles</li><li><strong class="md-inline-bold">UL enclosure type rating front side</strong>: Type 4X</li></ul><h3 class="md-block-header-three">Device Protection | Media</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Salt-spray resistance (IEC 60068-2-11)</strong>: Yes</li></ul><h3 class="md-block-header-three">Mechanical Data</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Can be illuminated</strong>: No</li><li><strong class="md-inline-bold">Actuating function</strong>: Latching</li><li><strong class="md-inline-bold">Color</strong>: Red</li><li><strong class="md-inline-bold">Color collar</strong>: Yellow</li><li><strong class="md-inline-bold">Shape collar</strong>: Round</li><li><strong class="md-inline-bold">Contact type</strong>: 2 Ø</li></ul><h3 class="md-block-header-three">Mechanical Data | Material Data</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Material housing</strong>: Plastic</li><li><strong class="md-inline-bold">Material contact</strong>: Gold</li></ul><h3 class="md-block-header-three">Mechanical Data | Mounting Data</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Mounting method</strong>: Threaded ring</li><li><strong class="md-inline-bold">Installation height</strong>: 39.6 mm</li><li><strong class="md-inline-bold">Mounting depth</strong>: 36.4 mm</li><li><strong class="md-inline-bold">Mounting hole</strong>: 22.3 mm</li><li><strong class="md-inline-bold">Height</strong>: 30 mm</li><li><strong class="md-inline-bold">Width</strong>: 29.8 mm</li><li><strong class="md-inline-bold">Depth</strong>: 69.7 mm</li><li><strong class="md-inline-bold">Grid min.</strong>: 30 mm</li></ul><h3 class="md-block-header-three">Environmental Characteristics | Climatic</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Operating temperature min.</strong>: -40 °C</li><li><strong class="md-inline-bold">Operating temperature max.</strong>: 85 °C</li><li><strong class="md-inline-bold">Derating from</strong>: 40 °C</li><li><strong class="md-inline-bold">Storage temperature min.</strong>: -40 °C</li><li><strong class="md-inline-bold">Storage temperature max.</strong>: 90 °C</li><li><strong class="md-inline-bold">Relative humidity max. (operation)</strong>: 93%</li></ul>

<h3><strong>Murr 69050 E-Stop 22 2NC M12(4)</strong>&nbsp;</h3>
<h3>Electrical Data | Supply</h3>
<ul>
<li><strong>Rated operating voltage AC-15</strong>: 35 V</li>
<li><strong>Rated operating voltage DC-13</strong>: 35 V</li>
</ul>
<h3>Electrical Data | Input</h3>
<ul>
<li><strong>Short-circuit current</strong>: 1000 A</li>
</ul>
<h3>Electrical Data | Output</h3>
<ul>
<li><strong>Switching power max.</strong>: 0.25 W</li>
<li><strong>Voltage switching AC min.</strong>: 1 V</li>
<li><strong>Switching voltage AC max.</strong>: 35 V</li>
<li><strong>Switching voltage AC max. (UL 60947)</strong>: 30 V</li>
<li><strong>Voltage switching DC min.</strong>: 1 V</li>
<li><strong>Switching voltage DC max.</strong>: 35 V</li>
<li><strong>Switching voltage DC max. (UL 60947)</strong>: 30 V</li>
<li><strong>Switching current min.</strong>: 1 mA</li>
<li><strong>Switching current max.</strong>: 100 mA</li>
</ul>
<h3>Installation | Connection</h3>
<ul>
<li><strong>Family construction form</strong>: M12</li>
</ul>
<h3>Installation | Pin Assignment</h3>
<ul>
<li><strong>Coding</strong>: A</li>
<li><strong>Number of poles</strong>: 4</li>
</ul>
<h3>Device Protection | Electrical</h3>
<ul>
<li><strong>Installation height max. ASL</strong>: 2000 m</li>
<li><strong>Degree of protection front (EN IEC 60529)</strong>: IP65</li>
<li><strong>Degree of protection back (EN IEC 60529)</strong>: IP65, IP67</li>
<li><strong>Pollution Degree</strong>: 2</li>
<li><strong>Short circuit protective device (SCPD)</strong>: Fuse 250 V / 0.1 A / 1.5 kA gG quick</li>
<li><strong>Rated insulation voltage</strong>: 250 V</li>
<li><strong>Overvoltage category (EN 60950-1)</strong>: II</li>
</ul>
<h3>Device Protection | Mechanical</h3>
<ul>
<li><strong>Mechanical endurance</strong>: 50,000 cycles</li>
<li><strong>Mechanical endurance B10</strong>: 65,000 cycles</li>
<li><strong>Operating life B10d</strong>: 84,500 cycles</li>
<li><strong>UL enclosure type rating front side</strong>: Type 4X</li>
</ul>
<h3>Device Protection | Media</h3>
<ul>
<li><strong>Salt-spray resistance (IEC 60068-2-11)</strong>: Yes</li>
</ul>
<h3>Mechanical Data</h3>
<ul>
<li><strong>Can be illuminated</strong>: No</li>
<li><strong>Actuating function</strong>: Latching</li>
<li><strong>Color</strong>: Red</li>
<li><strong>Color collar</strong>: Yellow</li>
<li><strong>Shape collar</strong>: Round</li>
<li><strong>Contact type</strong>: 2 Ø</li>
</ul>
<h3>Mechanical Data | Material Data</h3>
<ul>
<li><strong>Material housing</strong>: Plastic</li>
<li><strong>Material contact</strong>: Gold</li>
</ul>
<h3>Mechanical Data | Mounting Data</h3>
<ul>
<li><strong>Mounting method</strong>: Threaded ring</li>
<li><strong>Installation height</strong>: 39.6 mm</li>
<li><strong>Mounting depth</strong>: 36.4 mm</li>
<li><strong>Mounting hole</strong>: 22.3 mm</li>
<li><strong>Height</strong>: 30 mm</li>
<li><strong>Width</strong>: 29.8 mm</li>
<li><strong>Depth</strong>: 69.7 mm</li>
<li><strong>Grid min.</strong>: 30 mm</li>
</ul>
<h3>Environmental Characteristics | Climatic</h3>
<ul>
<li><strong>Operating temperature min.</strong>: -40 °C</li>
<li><strong>Operating temperature max.</strong>: 85 °C</li>
<li><strong>Derating from</strong>: 40 °C</li>
<li><strong>Storage temperature min.</strong>: -40 °C</li>
<li><strong>Storage temperature max.</strong>: 90 °C</li>
<li><strong>Relative humidity max. (operation)</strong>: 93%</li>
</ul>


Murr Asia-Pacific Pte. Ltd

Murr Elektronik 69050 E-Stop 22 2NC M12(4)

murr elektronik 69050 e-stop 22 2nc m12(4) emergency stop push buttons elektronik/穆尔电子 穆尔电子

murr-elektronik-69050-e-stop-22-2nc-m12-4

<p class="md-block-unstyled">Unit of Measurement: PC</p><p class="md-block-unstyled">Measurement System: Metric</p><p class="md-block-unstyled">Bore Diameter: 4</p><p class="md-block-unstyled">Outside Diameter: 13</p><p class="md-block-unstyled">Width: 5</p><p class="md-block-unstyled">Tolerance: Normal (PN)</p><p class="md-block-unstyled">Radial Internal Clearance | Preload: CN</p><p class="md-block-unstyled">Bore Type: Cylindrical</p><p class="md-block-unstyled">Cage Design: Sheet Metal</p><p class="md-block-unstyled">Lubricant: Grease</p><p class="md-block-unstyled">Bearing Material: Bearing Steel</p>

<p>Unit of Measurement: PC</p>
<p>Measurement System: Metric</p>
<p>Bore Diameter: 4</p>
<p>Outside Diameter: 13</p>
<p>Width: 5</p>
<p>Tolerance: Normal (PN)</p>
<p>Radial Internal Clearance | Preload: CN</p>
<p>Bore Type: Cylindrical</p>
<p>Cage Design: Sheet Metal</p>
<p>Lubricant: Grease</p>
<p>Bearing Material: Bearing Steel</p>
