ELORA

Pedrollo

Mechanical Parts

mechanical-parts

O Ring

o-ring

Screwdrivers & Screw Extractors

screwdrivers-screw-extractors

Screwdriver Sets

screwdriver-sets

Screwdrivers

screwdrivers

Pumps

pumps

Water Pumps

water-pumps

FORCE

Others

SATA

Nexus

Impact Sockets

Sockets

Ring Spanners

Socket Sets

Flank Sockets

Open End Spanners

Combination Spanners

Hex Keys & Sets

Screwdriver Bits & Bit Set

Mr Jones Ong

Elora Electricians Screwdriver 649-IS 75

elora electricians screwdriver 649-is 75 obeng screwdrivers pemutar skru 电工螺丝刀 螺丝起子 埃洛拉

elora-electricians-screwdriver-649-is-75

Elora 649-IS 60 Plain Slot 0.4×2.5 Electricians Screwdriver

Description:- For plain slotted screws
matt chrome plated forged blade
through hardened
blade edge gun metal finish
nonslip QUATROLIT®-2C-handle
with suspension hole
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1

Elora 649-IS 75 Plain Slot 0.5×3.0 Electricians Screwdriver

Elora 649-IS 100 Plain Slot 0.6×3.5 Electricians Screwdriver

Elora 649-IS 108 Plain Slot 0.8×4.0 Electricians Screwdriver

Elora 649-IS 125 Plain Slot 1.0×5.5 Electricians Screwdriver

Elora 649-IS 150 Plain Slot 1.0×5.5 Electricians Screwdriver

Elora 649-IS 175 Plain Slot 1.0×5.5 Electricians Screwdriver

Elora 649-IS 200 Plain Slot 1.0×5.5 Electricians Screwdriver

Elora 649-IS 4.5×300 Plain Slot 0.8×4.5 Electricians Screwdriver

Elora 649-IS 6.0×300 Plain Slot 1.0×6.0 Electricians Screwdriver

<h3 class="md-block-header-three">Elora 649-IS 60 Plain Slot 0.4×2.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649020605500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,4 Î 2,5</li><li>Blade Length mm:- 60</li><li>Blade plus Handle mm:- 135</li><li>Weight g:- 30</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 75 Plain Slot 0.5×3.0 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649020755500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,5 Î 3,0</li><li>Blade Length mm:- 75</li><li>Blade plus Handle mm:- 160</li><li>Weight g:- 32</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 100 Plain Slot 0.6×3.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021005500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,6 Î 3,5</li><li>Blade Length mm:- 100</li><li>Blade plus Handle mm:- 185</li><li>Weight g:- 36</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 108 Plain Slot 0.8×4.0 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021085500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,8 Î 4,0</li><li>Blade Length mm:- 100</li><li>Blade plus Handle mm:- 185</li><li>Weight g:- 40</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 125 Plain Slot 1.0×5.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021255500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 5,5</li><li>Blade Length mm:- 125</li><li>Blade plus Handle mm:- 210</li><li>Weight g:- 60</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 150 Plain Slot 1.0×5.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021505500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 5,5</li><li>Blade Length mm:- 150</li><li>Blade plus Handle mm:- 235</li><li>Weight g:- 66</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 175 Plain Slot 1.0×5.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649021755500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 5,5</li><li>Blade Length mm:- 175</li><li>Blade plus Handle mm:- 260</li><li>Weight g:- 70</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 200 Plain Slot 1.0×5.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649022005500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 5,5</li><li>Blade Length mm:- 200</li><li>Blade plus Handle mm:- 295</li><li>Weight g:- 84</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 4.5×300 Plain Slot 0.8×4.5 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649023005500 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 0,8 Î 4,5</li><li>Blade Length mm:- 300</li><li>Blade plus Handle mm:- 385</li><li>Weight g:- 70</li><li>Product details:- see PDF-Data sheet</li></ul> <h3 class="md-block-header-three">Elora 649-IS 6.0×300 Plain Slot 1.0×6.0 Electricians Screwdriver</h3><h3 class="md-block-header-three">Product code: 649023005501 </h3><ul class="md-block-unordered-list-item"><li>Description:- For plain slotted screws matt chrome plated forged blade through hardened blade edge gun metal finish nonslip QUATROLIT®-2C-handle with suspension hole made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li><li>Edge mm:- 1,0 Î 6,0</li><li>Blade Length mm:- 300</li><li>Blade plus Handle mm:- 395</li><li>Weight g:- 114</li><li>Product details:- see PDF-Data sheet</li></ul>

<h3>Elora 649-IS 60 Plain Slot 0.4×2.5 Electricians Screwdriver</h3>
<h3>Product code: 649020605500 </h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,4 Î 2,5</li>
<li>Blade Length mm:- 60</li>
<li>Blade plus Handle mm:- 135</li>
<li>Weight g:- 30</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 75 Plain Slot 0.5×3.0 Electricians Screwdriver</h3>
<h3>Product code: 649020755500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,5 Î 3,0</li>
<li>Blade Length mm:- 75</li>
<li>Blade plus Handle mm:- 160</li>
<li>Weight g:- 32</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 100 Plain Slot 0.6×3.5 Electricians Screwdriver</h3>
<h3>Product code: 649021005500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,6 Î 3,5</li>
<li>Blade Length mm:- 100</li>
<li>Blade plus Handle mm:- 185</li>
<li>Weight g:- 36</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 108 Plain Slot 0.8×4.0 Electricians Screwdriver</h3>
<h3>Product code: 649021085500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,8 Î 4,0</li>
<li>Blade Length mm:- 100</li>
<li>Blade plus Handle mm:- 185</li>
<li>Weight g:- 40</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 125 Plain Slot 1.0×5.5 Electricians Screwdriver</h3>
<h3>Product code: 649021255500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 5,5</li>
<li>Blade Length mm:- 125</li>
<li>Blade plus Handle mm:- 210</li>
<li>Weight g:- 60</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 150 Plain Slot 1.0×5.5 Electricians Screwdriver</h3>
<h3>Product code: 649021505500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 5,5</li>
<li>Blade Length mm:- 150</li>
<li>Blade plus Handle mm:- 235</li>
<li>Weight g:- 66</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 175 Plain Slot 1.0×5.5 Electricians Screwdriver</h3>
<h3>Product code: 649021755500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 5,5</li>
<li>Blade Length mm:- 175</li>
<li>Blade plus Handle mm:- 260</li>
<li>Weight g:- 70</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 200 Plain Slot 1.0×5.5 Electricians Screwdriver</h3>
<h3>Product code: 649022005500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 5,5</li>
<li>Blade Length mm:- 200</li>
<li>Blade plus Handle mm:- 295</li>
<li>Weight g:- 84</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 4.5×300 Plain Slot 0.8×4.5 Electricians Screwdriver</h3>
<h3>Product code: 649023005500&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 0,8 Î 4,5</li>
<li>Blade Length mm:- 300</li>
<li>Blade plus Handle mm:- 385</li>
<li>Weight g:- 70</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>
&nbsp;
<h3>Elora 649-IS 6.0×300 Plain Slot 1.0×6.0 Electricians Screwdriver</h3>
<h3>Product code: 649023005501&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For plain slotted screws 
matt chrome plated forged blade 
through hardened 
blade edge gun metal finish 
nonslip QUATROLIT®-2C-handle 
with suspension hole 
made from Elora-Chrome-Vanadium 59CrV4 / 1.2242 
Conforms to DIN ISO 2380-2, blade tip Conforms to DIN ISO 2380-1</li>
<li>Edge mm:- 1,0 Î 6,0</li>
<li>Blade Length mm:- 300</li>
<li>Blade plus Handle mm:- 395</li>
<li>Weight g:- 114</li>
<li>Product details:- see PDF-Data sheet</li>
</ul>

Ian Ong

WEICON

LOCTITE

METABO

Permatex

Fujiplus

DEVCON

Molykote

Adhesive Glue

Sealants

Lubricants

Threadlocker

Degreasers

Anti Rust Coating & Lubricant

Socket Accessories

Epoxy

Grease

Other Tools

Sharon/Joey

buyerIntroduction

Elora 649-IS Plain Slot Electricians Screwdriver

elora 649-is plain slot electricians screwdriver obeng listrik biasa screwdrivers pemutar skru elektrik elora/埃洛拉 649-is平槽电工螺丝刀 螺丝起子 埃洛拉

elora-649-is-plain-slot-electricians-screwdriver

Sizes

Elora Module-QUATROLIT®-2C-Screwdrivers OMS-6 

Contents:
QUATROLIT®-2 Component Screwdrivers for plain slotted Screws
539-IS 90 (0,8x4,0) | 100 (1,0x5,5) | 125 (1,2x6,5) | 150 (1,2x8,0) | 649-IS 75 (0,5x3,0)
QUATROLIT®-2 Component Screwdriver for cross slotted Screws
559-PH 1, 2, 3
Chubby Screwdriver for plain slotted Screws
543-IS 60 (1,0x5,5)
Chubby Screwdriver for cross slotted Screws
555-PH 2 

<h3 class="md-block-header-three">Elora Module-QUATROLIT®-2C-Screwdrivers OMS-6 </h3><ul class="md-block-unordered-list-item"><li>for ELORA-roller tool cabinets</li><li>black, with yellow signal colour</li><li>oil and grease resistant</li><li>chemical resistant</li><li>Width: 41,5 cm, Depth: 18,9 cm</li><li>hard foam insert </li><li>Contents: QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 539-IS 90 (0,8x4,0) | 100 (1,0x5,5) | 125 (1,2x6,5) | 150 (1,2x8,0) | 649-IS 75 (0,5x3,0) QUATROLIT®-2 Component Screwdriver for cross slotted Screws 559-PH 1, 2, 3 Chubby Screwdriver for plain slotted Screws 543-IS 60 (1,0x5,5) Chubby Screwdriver for cross slotted Screws 555-PH 2 </li></ul>

<h3>Elora Module-QUATROLIT®-2C-Screwdrivers OMS-6&nbsp;</h3>
<ul>
<li>for ELORA-roller tool cabinets</li>
<li>black, with yellow signal colour</li>
<li>oil and grease resistant</li>
<li>chemical resistant</li>
<li>Width: 41,5 cm, Depth: 18,9 cm</li>
<li>hard foam insert&nbsp;</li>
<li>Contents: 
QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 
539-IS 90 (0,8x4,0) | 100 (1,0x5,5) | 125 (1,2x6,5) | 150 (1,2x8,0) | 649-IS 75 (0,5x3,0) 
QUATROLIT®-2 Component Screwdriver for cross slotted Screws 
559-PH 1, 2, 3 
Chubby Screwdriver for plain slotted Screws 
543-IS 60 (1,0x5,5) 
Chubby Screwdriver for cross slotted Screws 
555-PH 2&nbsp;</li>
</ul>

Elora Module-QUATROLIT®-2C-Screwdrivers OMS-6

elora module-quatrolit®-2c-screwdrivers oms-6 module-quatrolit®-2c-obeng screwdriver sets set obeng modul elora-quatrolit®-2c-pemutar skru pemutar elora/埃洛拉 模块-quatrolit®-2c-螺丝刀 螺丝刀组 埃洛拉

elora-module-quatrolit-2c-screwdrivers-oms-6

Elora OMS-6 10pc. Quatrolit® 2c-Screwdriver-Set

Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT
black, with yellow signal colour
oil and grease resistant
chemical resistant
Width: 41,5 cm, Depth: 18,9 cm
hard foam insert

Contents:- QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 539-IS 90, 100, 125, 150, 649-IS 75
QUATROLIT®-2 Component Screwdriver for cross slotted Screws
559-PH 1, 2, 3
Chubby Screwdriver for plain slotted Screws
543-IS 60
Chubby Screwdriver for cross slotted Screws
555-PH 2

Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT black, with yellow signal colour oil and grease resistant chemical resistant Width: 41,5 cm, Depth: 18,9 cm hard foam insert

<h3 class="md-block-header-three">Elora OMS-6 10pc. Quatrolit® 2c-Screwdriver-Set</h3><h3 class="md-block-header-three">Product code: 410601000</h3><ul class="md-block-unordered-list-item"><li>Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT black, with yellow signal colour oil and grease resistant chemical resistant Width: 41,5 cm, Depth: 18,9 cm hard foam insert</li><li>Contents:- QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 539-IS 90, 100, 125, 150, 649-IS 75 QUATROLIT®-2 Component Screwdriver for cross slotted Screws 559-PH 1, 2, 3 Chubby Screwdriver for plain slotted Screws 543-IS 60 Chubby Screwdriver for cross slotted Screws 555-PH 2</li><li>Weight g:- 900</li></ul> <h3 class="md-block-header-three">Elora OMS-6.7.36 and 37 Empty Module</h3><h3 class="md-block-header-three">Product code: 410607000</h3><ul class="md-block-unordered-list-item"><li>Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT black, with yellow signal colour oil and grease resistant chemical resistant Width: 41,5 cm, Depth: 18,9 cm hard foam insert</li><li>Contents:- empty Module</li><li>Weight g:- 80</li></ul>

<h3>Elora OMS-6 10pc. Quatrolit® 2c-Screwdriver-Set</h3>
<h3>Product code: 410601000</h3>
<ul>
<li>Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT 
black, with yellow signal colour 
oil and grease resistant 
chemical resistant 
Width: 41,5 cm, Depth: 18,9 cm 
hard foam insert</li>
<li>Contents:- QUATROLIT®-2 Component Screwdrivers for plain slotted Screws 539-IS 90, 100, 125, 150, 649-IS 75 
QUATROLIT®-2 Component Screwdriver for cross slotted Screws 
559-PH 1, 2, 3 
Chubby Screwdriver for plain slotted Screws 
543-IS 60 
Chubby Screwdriver for cross slotted Screws 
555-PH 2</li>
<li>Weight g:- 900</li>
</ul>
&nbsp;
<h3>Elora OMS-6.7.36 and 37 Empty Module</h3>
<h3>Product code: 410607000</h3>
<ul>
<li>Description:- For Elora-roller tool cabinets and Elora-tool chest and Elora work bench, Elora-No.1820-LOT black, with yellow signal colour oil and grease resistant chemical resistant Width: 41,5 cm, Depth: 18,9 cm hard foam insert</li>
<li>Contents:- empty Module</li>
<li>Weight g:- 80</li>
</ul>

elora oms-6 10pc. quatrolit® 2c-screwdriver-set 2c-obeng-set screwdriver sets set obeng 2c-screwdriver pemutar skru elora/埃洛拉 10个。 quatrolit®2c螺丝刀套件 螺丝刀组 埃洛拉

elora-oms-6-10pc-quatrolit-2c-screwdriver-set

Elora OMS-6.7.36 and 37 Empty Module

Elora Screwdriver 545-IS 75

elora screwdriver 545-is 75 obeng screwdrivers pemutar skru 螺丝刀 螺丝起子 埃洛拉

elora-screwdriver-545-is-75

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 P175 ID 174.50 x CS 8.40Material : Nitrile (NBR) 90 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P175
&nbsp;ID 174.50 x CS 8.40
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:2mv6b"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2mv6b" 
 layout="nodisplay"></amp-image-lightbox>

John

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING JIS B2401 P175 ID 174.50 x CS 8.40 Nitrile (NBR) 90 Shore

oring jis b2401 p175 id 174.50 cs 8.40 nitrile (nbr) 90 shore ring o-ring oem pantai gelang oem/oem代工 8.40腈（nbr）90肖氏 o型圈 oem代工

oring-jis-b2401-p175-id-174-50-x-cs-8-40-nitrile-nbr-90-shore

ORING AS568 AS373 ID 227.97 x CS 5.33Material : Nitrile (NBR) 90 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS373
&nbsp;ID 227.97 x CS 5.33
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:2mv6b"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2mv6b" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS373 ID 227.97 x CS 5.33 Nitrile (NBR) 90 Shore

oring as568 as373 id 227.97 x cs 5.33 nitrile (nbr) 90 shore o ring o-ring oem gelang oem/oem代工 5.33腈（nbr）90肖氏 o型圈 oem代工

oring-as568-as373-id-227-97-x-cs-5-33-nitrile-nbr-90-shore

Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. As a result of their reliability and the fact that they are easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure sets, for transferring liquids and for the irrigation of gardens and allotments. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

Applications: irrigation pumps, cooling systems, air conditioning systems, water supply systems, liquids transfer, pressure systems

Temperature of the liquid from -10 °C to +90 °C

Description:Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. As a result of their reliability and the fact that they are easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure sets, for transferring liquids and for the irrigation of gardens and allotments. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather. Features:Liquid type: clean waterUses: domestic, civilApplications: irrigation pumps, cooling systems, air conditioning systems, water supply systems, liquids transfer, pressure systemsRypology: surfaceFamily: centrifugal Performance Range:Flow rate up to 160 l/min (9,6 m³/h)Head up to 56 m Application Limit:Temperature of the liquid from -10 °C to +90 °CAmbient Temperature to +40 °C• Manometric suction lift up to 7 m• Max. working pressure: 6 Bar• Continuous service S1

<ins>Description:</ins>
Suitable for use with clean water and liquids that are not chemically aggressive towards the materials from which the pump is made. As a result of their reliability and the fact that they are easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in combination with small and medium sized pressure sets, for transferring liquids and for the irrigation of gardens and allotments. The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.

<ins>Features:</ins>
Liquid type: clean water
Uses: domestic, civil
Applications: irrigation pumps, cooling systems, air conditioning systems, water supply systems, liquids transfer, pressure systems
Rypology: surface
Family: centrifugal

<ins>Performance Range:</ins>
Flow rate up to 160 l/min (9,6 m³/h)
Head up to 56 m

<ins>Application Limit:</ins>
Temperature of the liquid from -10 °C to +90 °C
Ambient Temperature to +40 °C
• Manometric suction lift up to 7 m
• Max. working pressure: 6 Bar
• Continuous service S1