MultiScanner i520 OneStep quickly and easily locates the edges and center of wood and metal studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. A 4-mode switch makes it easy to change functions, while the ultra-bright display screen, Spot Lite Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.
- Stud Scan mode locates the edges and center of wood or metal studs up to 3/4 in. (19 mm) deep
- DeepScan mode doubles the scanning depth to 1 1/2 in. (38 mm)
- Metal mode detects ferrous metal, such as steel pipe, up to 3 in. (76 mm) deep
- AC Scan locates live, unshielded electrical wiring up to 2 in. deep
- WireWarning detection indicates the presence of live, unshielded electrical wire up to 2 in. (51 mm) deep in stud and metal scanning modes
- ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud
- An ultra-bright LCD screen indicates direction, edges and center of studs
- Brand: Zircon
- Product Type: Multi Scanner
- Colour: Yellow & Black
- Battery Type: Alkaline
- Battery Voltage: 9 V
- Operating Temperature: 20° to 105°F (-7° to 41°C)
- Storage Temperature: -20° to 150°F (-29° to 66°C)
- Humidity (Non-Condensing): 5-90% RH
- Length: 18.5 cm
- Width: 8.3 cm
- Height: 3.6 cm
- Weight (without Battery): 0.184 kg
- Wire Warning (Position Accuracy): Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded wire in drywall
- Wire Warning (Depth): In typical wall with Romex wiring, wire can be detected up to 2 in. (51 mm) deep
- StudScan Mode: Up to 3⁄4 in. (19 mm)
- DeepScan Mode: Up to 11⁄2 in. (38 mm)
- Metal Scan Mode: Up to 3 in. (76 mm) for rebar
- Up to a depth of 3⁄4 in. (19 mm): Typically within 1⁄8 in. (3 mm)
- Up to a depth of 11⁄2 in. (38 mm): Typically within 3⁄16 in. (5 mm)
- In Metal Scan Mode: Typically within 1⁄2 in. (13 mm) using the dual scan and mark procedure