Meter Manual Ranging EEDM503D

Features

• LCD display—large, easy-to-read 2,000-count LCD display

• On/off push button—push to turn the EEDM503C on and off

• Ohm function measure ohms to determine resistance of a coil or spark plug wire

• Continuity buzzer—test continuity of fuses, fusible links, components and circuits

• Diode test—use the diode function to test the diode pack on a typical alternator

• DC amps—measure DC current to determine the presence of a parasitic load. Measure current draw of branch circuits

• Data-H (Data hold)—lock reading on the display in hard to read locations or for future reference

• DC VOLTS—Use DC voltage to verify if the proper voltage level is arriving at a sensor of circuit

• AC Volts—measure AC voltage signals on digital MAF sensors, wheel speed sensors and vehicle speed sensors

• AC amps—measure the current draw of AC powered equipment in the shop

• Tilt stand—is built-in into the instrument housing

• Separate fuse/battery compartment—easily removed for battery/fuse replacement. Fuses are labeled with replacement number

Specifications

Capacitance; No

RPM; EEDMRPMG (opt.)

Low Pass Filter (LPF); No

Case or Zipper Pouch; EEDM504B4 (opt.)

Adjustable Trigger Level; No

Temperature; EEDM506C† (opt.)AC Volts750

Micro Amps; Yes

Country Of Origin; KOR

Dimensions, inches; 7-3/4 x 3-3/4 x 1-1/2

Noise Reduction Circuit; No

mS Pulse Width; No

CAT Rating; CATII 750 V AC, CATII 1,000 V DC, CATIII 600 V AC/DC

Backlight; No

Auto Shutoff; No

Test Leads; EEDM504B3

Certificate of Calibration Model; —

DC Amps; 10

UL® Listed; cULus 61010-1

Glitch Capture; No

Insulation Test; No

Analog Bar Graph; No

Resistance, ohms; 20M Ohm

Basic DC Accuracy; 0.50%

Data Hold; Yes

Auto Range; No

Duty/Dwell; No

True RMS (Root Mean Square); No

AC Amps; 10

Display Count;' 2,000

Fuses; EEDMFUSE-1, EEDMFUSE-4

Blown Fuse Identifier; Yes

Comp. Output (USB); No

Min/Max; No

DC Volts; ' 1,000

Easy Open Battery and Fuse Door; Yes

Color Screen; No

Frequency; No