Meter Color Display W Cert EEDM604ECRT

Features

• Color VA Type LCD Display - 50,000 count with 51 segment bar graph

• Triple Display - activated with REC, REL, PEAK-H buttons

• REC (Record Mode) - store minimum, maximum and average readings over a measurement period

• RANGE - manual range option for each function

• PEAK-H - peak hold button engages .25 millisecond rapid signal capture function to catch glitches

• COMP (Compare) - activates the compare function to compare your reading against a known standard

• REL% (Relative Percent Mode) - factor out lead resistance for improved low ohm measurements or compare readings to a known standard - can also be used for differential measurements

• EDIT - use in conjunction with the COMP and arrow buttons to set the standard value for comparing readings

• Gray Button - use to select gray functions noted on meter

• HOLD - lock the reading on the display for hard to read locations for future reference

• Ohms, Conductance, Continuity - toggle between measuring resistance, conductance and continuity buzzer

• ACmV/ DCmV(AC or DC millivolts) - measure up to 500 AC or DC millivolts

• ADP (Adaptor mode) - direct readout on the LCD when using optional accessories

• DCV (DC Volts) - measure up to 1,000 V

• ACV/Hz (AC Volts and Frequency) - measure up to 1,000 V AC - Push the grey button to view frequency, duty, and mS pulse width of the signal

• Diode Test - test for good, open, or shorted diodes in circuits

• CAP (Capacitance) - measure the capacitance of condensers and capacitors

• Hz (Frequency) - measure the frequency, duty and pulse width of sensors and signals. Also used to measure temperature (gray button)

• AC/DC Current Functions (Amps) - measure the parasitic draw from the battery with ignition off

• External Testing of Internal Fuses - you can determine the status of the internal fuses before you open the battery/fuse compartment

• Protective boot and built-in tilt stand

• Technical Support 888-382-6522

Specifications

Capacitance; Yes

RPM; EEDMRPMG (opt.)

Low Pass Filter (LPF); No

Case or Zipper Pouch; EEDM650CPB

Replacement Fuses; EEDM604C1 EEDM604C2

Adjustable Trigger Level; No

Temperature; MT586B1 (opt.)

AC Volts; 1,000

Micro Amps; Yes

Country Of Origin; KOR

Dimensions, inches; 3-13/16 x 8 x 2-13/32

Noise Reduction Circuit; No

mS Pulse Width; Yes

CAT Rating; CATIII 1,000 V CAT IV 600 V

Backlight; Yes

Auto Shut-Off; Yes

Certificate of Calibration Model; EEDM604ECRTDC

Amps; 10

UL® Listed; cULus 61010-1

Glitch Capture; Yes

Insulation Test; No

Analog Bar Graph; Yes

Resistance, ohms(plus conductance)Basic DC Accuracy; 0.05%

Data Hold; Yes

Auto Range; Yes

Duty/Dwell; Yes/Duty

True RMS (Root Mean Square); Yes

AC Amps; 10

Display Count; 50,000

Blown Fuse Identifier; Yes

Comp. Output (USB); No

Min/Max; Yes

DC Volts; 1,000

Easy Open Battery and Fuse Door; Yes

Color Screen; Yes

Frequency; Yes