Senseware Flame Detector Tester Charger - CHA4P - Eezee

Singapore

|

Search Keyword, Item or Model

Press

forward-slash-icon

to jump to the search box

Shopping List

Shopping List

SGD - S$

/

/

/

/

Senseware Flame Detector Tester Charger - CHA4P

Senseware Flame Detector Tester Charger - CHA4P

Brand:	Senseware
Model:	CHA4P

Product Description

Senseware Flame Detector Tester Charger - CHA4P

Plug in the charger and apply the charger cable to the Test Lamp. The charge time for a completely discharged battery is +/- 4 hours. Do not charge for more than 6 hours. The Test Lamp must be fully charged when stored immediately after use. Every 3 months the unit should be recharged when stored without using. During charging the red LED on the left of the test lamp is on. However, when the test lamp is completely discharged, during the first hours the red LED may be off.

Features:

Good charging speed and most powerful
Small & lightweight - Slightly heavier than egg, simply slip it into bag when you are going out and about
Excellent quality-multiple protection - Over-current, short-circuit and over-temperature protect your device
100 % genuine auto cut & over heat protection

Specifications:

Brand: Senseware
Product Type: Flame Detector Tester Charger
Charger Voltage: 100-240 V/AC
Charger Amperage: 500 mA
Length: 10.3 cm
Width: 7 cm
Height: 4.6 cm

S$ 222.00

(exc. GST)

S$ 241.98

(inc. GST)

Units	Discount	Unit Price
1	-	S$ 222.00

Quantity:

EA

This product will be active soon.

Shop by Specification Table

You can find items with similar specifications from the table below.

power-supply-img

CSA C22.2 No 60950-1 UL 508 EN/IEC 62368-1, IEC 62368-1 EN/IEC 61204-3 IEC 61000-6-1 IEC 61000-6-2 IEC 61000-6-3 IEC 61000-6-4 IEC 61000-3-2 EN 61000-3-3 UL 62368-1 CSA C22.2 No 62368-1 UL 508 CSA C22.2 No 107.1 EN/IEC 62368-1, IEC 62368-1 EN/IEC 61010-1 EN 61010-2-201 EN/IEC 61204-3 IEC 61000-6-1 IEC 61000-6-2 IEC 61000-6-3 IEC 61000-6-4 IEC 61000-3-2 EN 61000-3-3 UL 62368-1 UL 61010-1 UL 61010-2-201 CSA C22.2 No 62368-1 CSA C22.2 No 61010-1 CSA C22.2 No 61010-2-201 IEC 60335-1 EN/IEC 62368-1, UL 508 CSA C22.2 No 60950-1 EN/IEC 62368-1, CSA C22.2 No 60950-1 UL 508

Connections - Terminals

Removable screw terminal block: 2 x 2.5 mm², for diagnostic relay Screw type terminals: 3 x 0.5...3 x 4 mm², (AWG 22...AWG 12) for input connection Screw type terminals: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input ground connection Screw type terminals: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connection, Screw connection: 0.5...2.5 mm², (AWG 20...AWG 14) for output Screw connection: 0.75...2.5 mm², (AWG 18...AWG 14) for input, For ground connection: screw type terminals, connection capacity: 1 x 4 mm² AWG 12, Removable screw terminal block: 2 x 2.5 mm², for diagnostic relay Screw type terminals: 3 x 0.5...3 x 4 mm², (AWG 22...AWG 12) for input connection Screw type terminals: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input ground connection Screw type terminals: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connection Screw type terminals: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for output ground connection, For output connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² AWG 20...AWG 8 For input connection: screw type terminals, connection capacity: 4 x 0.5...4 x 10 mm² AWG 20...AWG 8 For diagnostic relay: removable screw terminal block, connection capacity: 1 x 2.5 mm² AWG 14

Product Certifications

CCSAus EAC UL RCM KC, CE CUL listed CUL recognized RCM CB Scheme EAC KC, CE CULus EAC RCM CB Scheme KC, CCSAus EAC KC RCM UL, EAC RCM

45 A at 100...240 V AC, 35 A at 115 V 70 A at 230 V, 40.0 A at 115 V 80.0 A at 230 V, 50 A at 100...240 V AC, 30 A

Power Supply Output Current

2.2 A, 2.5 A, 6.25 A, 3.13 A, 5 A