Schneider Electric LXM28EU07M3X Motion Servo Drive, Lexium 28, Single and Three Phase, 200 to 240V, 750W, Ethercat

Range of product : Lexium 28

Product or component type : Motion servo drive

Device short name : LXM28E

Format of the drive : Compact housing

Line current :

• 6 A 181.8 % at 220 V, single phase
• 6 A 160.6 % at 220 V, three phase

Network number of phases : Single or three phases

[Us] rated supply voltage :

• 200...240 V (- 10...15 %) for three phase
• 200...240 V (- 20...15 %) for single phase

Supply voltage limits :

• 200…255 V three phase
• 170…255 V single phase

Supply frequency : 50/60 Hz - 5...5 %

Network frequency : 47.5...63 Hz

EMC filter : Without EMC filter

Continuous output current : 4.5 A at 16 kHz

Output current 3s peak : 13.5 A at 220 V

Continuous power : 750 W at 220 V

Nominal power : 0.75 kW at 220 V 16 kHz

switching frequency : 16 kHz

Overvoltage category : III

Maximum leakage current : 1.3 mA

Output voltage : <= power supply voltage

electrical isolation : Between power and control

Type of cable : Shielded motor cable (temperature: 0…55 °C) copper

Electrical connection :

• Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2)
• Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S, T)
• Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE)
• Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)

Discrete input number :

• 8 programmable (CN1)
• 2 fast capture (CN1)
• 1 safety function STO (CN9)

Discrete input voltage : 24 V DC for logic

Discrete input logic : Positive or negative (CN1)

Discrete output number :

• 5 logic output (CN1) at 12...24 V DC
• 1 pulse train output (PTO) (CN1)

Discrete output voltage : 12...24 V DC

Discrete output logic : Positive or negative (CN1)

Control signal type : Servo motor encoder feedback CN2

Protection type :

• Against reverse polarity: inputs signal
• Against short-circuits: outputs signal
• Overcurrent: motor
• Overvoltage: motor
• Undervoltage: motor
• Overheating: motor
• Overload: motor
• Overspeed: motor

Safety function : STO (safe torque off), integrated

Safety level :

• SIL 2 conforming to IEC 61800-5-2: 2007
• SIL 2 conforming to IEC 61508-1: 2010
• PL d/category 3 conforming to ISO 13849-1: 2008
• SIL 2 conforming to ISO 13849-1: 2009/AC
• SIL 2 conforming to IEC 60204-1: 2006
• SIL 2 conforming to IEC 60204-1: 2009/A1
• SIL 2 conforming to IEC 60204-1: 2010/AC
• SIL 2 conforming to IEC 62061: 2012

Communication interface : EtherCAT, integrated

Connector type : RJ45 (CN4) for EtherCAT

Method of access : Slave

Transmission rate : 100 Mbit/s for EtherCAT

Physical interface : RS485 for Modbus Serial line slave

Status LED :

• 1 LED (red) DC bus energized
• 1 LED (multi-colour) N.RUN
• 1 LED (multi-colour) N.ERR
• 2 LEDs (green) Link (Link Status)
• 2 LEDs (yellow) activity

Signalling function : Servo status and fault codes five 7-segment display units

Marking :

• CE
• CULus

Type of cooling :Fan

Operating position : Vertical

Product compatibility :

• Servo motor BCH2 (130 mm, 1 motor stacks) at 500 W
• Servo motor (80 mm, 2 motor stacks) at 750 W
• Servo motor (130 mm, 1 motor stacks) at 600 W

Width : 55 mm

height : 150 mm

Depth : 146 mm

Net weight : 1 kg

Output current 3s peak 2 : 13.5 A at 220

Output current 3s peak 3 : 13.5 A at 220 V

Electromagnetic compatibility : Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3

Standards : IEC 61800-5-1

product certifications :

• CSA
• CE
• cULus

IP degree of protection : IP20

Vibration resistance : 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3

Shock resistance : 10 gn, type I conforming to IEC 60721-3-3

Relative humidity : 5…95 % without condensation

Ambient air temperature for operation : 0…55 °C

Ambient air temperature for storage : -25…65 °C

Operating altitude :

<= 1000 m without derating

> 1000...2000 m 1 % per 100 m