Schneider Electric LXM28EU04M3X Motion Servo Drive, Lexium 28, Single and Three Phase, 200 to 240V, 400W, Ethercat

This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated EtherCAT interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (three phase/single phase), an output current of 2.6A, nominal power of 400W and continuous power of 400W. It is furnished with spring terminal electrical connection and RJ45 connectors (CN4) for EtherCAT. There is an electrical isolation between power and control. It offers EtherCAT communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 146mm (depth) x 150mm (height). It weighs 1kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (60mm, 2 motor stacks) at 400W and servo motor (130mm, 1 motor stack) at 300W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

• Range of product: Lexium 28
• Product or component type: Motion servo drive
• Device short name: LXM28E
• Format of the drive: Compact housing
• Line current:
• 3.8 A, 211.6% at 220 V, single phase
• 3.8 A, 183.7% at 220 V, three phase
• Network number of phases: Single or three phases
• [Us] rated supply voltage:
• 200-240 V (-10...15%) for three-phase
• 200-240 V (-20...15%) for single-phase
• Supply voltage limits:
• 200-255 V for three-phase
• 170-255 V for single-phase
• Supply frequency: 50/60 Hz (-5...5%)
• Network frequency: 47.5-63 Hz
• EMC filter: Without EMC filter
• Continuous output current: 2.6 A at 16 kHz
• Output current 3s peak: 7.8 A at 220 V
• Continuous power: 400 W at 220 V
• Nominal power: 0.4 kW at 220 V, 16 kHz switching frequency
• Overvoltage category: III
• Maximum leakage current: 1.3 mA
• Output voltage: <= power supply voltage
• Electrical isolation: Between power and control
• Type of cable: Shielded motor cable (temperature: 0-55 °C), copper
• Electrical connection:

Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2)
Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S, T)
Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE)
Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)

• Discrete input number:
• 8 programmable (CN1)
• 2 fast capture (CN1)
• 1 safety function STO (CN9)
• Discrete input voltage: 24 V DC for logic
• Discrete input logic: Positive or negative (CN1)
• Discrete output number:
• 5 logic output (CN1) at 12-24 V DC
• 1 pulse train output (PTO) (CN1)
• Discrete output voltage: 12-24 V DC
• Discrete output logic: Positive or negative (CN1)
• Control signal type: Servo motor encoder feedback CN2
• Protection type:

Against reverse polarity: inputs signal
Against short-circuits: outputs signal
Overcurrent: motor
Overvoltage: motor
Undervoltage: motor
Overheating: motor
Overload: motor
Overspeed: motor

• Safety function: STO (safe torque off), integrated
• Safety level:
• SIL 2 conforming to IEC 61800-5-2: 2007
• SIL 2 conforming to IEC 61508-1: 2010
• PL d/category 3 conforming to ISO 13849-1: 2008
• SIL 2 conforming to ISO 13849-1: 2009/AC
• SIL 2 conforming to IEC 60204-1: 2006
• SIL 2 conforming to IEC 60204-1: 2009/A1
• SIL 2 conforming to IEC 60204-1: 2010/AC
• SIL 2 conforming to IEC 62061: 2012
• Communication interface: EtherCAT, integrated
• Connector type: RJ45 (CN4) for EtherCAT, RS485 for Modbus Serial line slave
• Method of access: Slave
• Transmission rate: 100 Mbit/s for EtherCAT
• Status LED:

1 LED (red) DC bus energized
1 LED (multi-colour) N.RUN
1 LED (multi-colour) N.ERR
2 LEDs (green) Link (Link Status)
2 LEDs (yellow) activity

• Signalling function: Servo status and fault codes five 7-segment display units
• Marking: CE, CULus
• Type of cooling: Fan
• Operating position: Vertical
• Product compatibility:

Servo motor BCH2 (60 mm, 2 motor stacks) at 400 W
Servo motor (80 mm, 1 motor stacks) at 400 W
Servo motor (130 mm, 1 motor stacks) at 300 W

• Width: 55 mm
• Height: 150 mm
• Depth: 146 mm
• Net weight: 1 kg
• Electromagnetic compatibility: Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
• Standards: IEC 61800-5-1
• Product certifications: CE, CSA, cULus
• IP degree of protection: IP20
• Vibration resistance: 3M4 amplitude = 3 mm (f = 9-200 Hz) conforming to IEC 60721-3-3
• Shock resistance: 10 gn, type I conforming to IEC 60721-3-3
• Relative humidity: 5-95% without condensation
• Ambient air temperature for operation: 0-55 °C
• Ambient air temperature for storage: -25-65 °C
• Operating altitude:
• <= 1000 m without derating
• 1000-2000 m 1% per 100 m