NATURAL MINERAL CRYSTALIZING PAINT FOR WALLS
S 2000 SILICATE PAINT
NATURAL MINERAL CRYSTALIZING PAINT FOR WALLS
USES
1. Odours-Free: Excellent for use on outdoor and indoor, façade and perimeter wall
2. Non-Static: Does not attract dirt particles, good for basement car park coating.
3. Waterproofing & Finishing Coat: for Concrete Façade, lime or cement mortar, brick, gypsum
plaster, ceiling in the toilet and pre-cast panel.
FEATURES
1. No Cement Skim Coat & Primer needed, just paint 3 coats directly over cement surface to complete
the job.
2. Resists algae growth, peeling, scratches, withstand high pressure jet cleaning, water repelling.
3. Non-Static mineral product, does not attract dirt, always remain clean. especially for the basement
carpark.
4. Form crystal that allows water vapour to breath out, keeping the building in a dry healthy condition,
prevented acid rain attack.
5. Resist peel or flake. Excellent adhesion to a cement substrates, becoming part of them.
6. Non reflective, Dull Flat Matt Finish.
7. Does not burn and emit noxious fumes when exposed to fire, safe to use in indoor theatre.
8. Long-term protection of 10 to 20 years.
Suitable for preservation of
heritage buildings similar to
the picture above.
SINGPOST’S Car Park Resist Dirt Pickup.
Painting in Progress 2 years Later
Common Resin Paint’s Defects
APPLICATION METHODS
Surfaces must be dry and free from grease, oil, loose particles, dust or other contaminants.
Surfaces must have a certain roughness and porosity to allow good penetration and adhesion of the coating.
New cement mortar renders require a waiting period of 3 to 4 weeks before painting.
Surfaces painted with Lime Wash should be removed with a brush and apply a coat of S2000 P PRIMER diluted with 50% of water.
For gypsum plaster surfaces, apply one coat of S2000P PRIMER before applying S2000.
Apply thinly, sufficient for the cement to absorb the paint. over coating it will become powdery.
Use Brushes or Paint Roller, do not spray.
Not suitable for: Synthetic Paint, fiberglass, & Water Repellent treated surfaces. All existing synthetic paint need to remove until bare cement surface.
S 2000 SILICATE PAINT
NATURAL MINERAL CRYSTALIZING PAINT FOR WALLS
PROBLEMS ENCOUNTERED IN PAINTING
S2000 painted over existing polymer paint:
1. Polymer paint is food to the bacteria, algae or mold will growth on it and leach out through S2000, as it is a crystal forming paint, non air tight, which allow vapor and mold to flow out.
2. To kill existing algae or mold with 10% Bleaching solution, allow 1 day for the reaction, before painting with S2000.
3. It is better to remove the old polymer (or organic polymer paint) before apply S2000, as the high alkalinity of S2000 may cause the polymer paint to peel.
4. S2000 come in white color, we can only add a small amount of color pigment to tint it, heavy doze of pig-ment will cause the pigment to fall out after painting.
PRECAUTION
The paint is alkaline in nature, wear protective gear to protect the eye and skin.
In case of contact, rinse with water immediately.
Above are our recommendations based on in house testing and experience. If in doubt, please do a preliminary testing before use.
PACKING: 5 kg-pail 20 kg - pail
NATURAL MINERAL CRYSTALIZING PAINT FOR WALLS
COMPARISON BETWEEN SILICATE AND SILICONE BASED PAINTS
COMPARISON BETWEEN NATURAL MINERAL SILICATE AND REGULAR ACRYLIC/ LATEX PAINTS
SILICATE BASED
SILICONE BASED
VOC Free.
Contains VOC.
Has waterproofing properties.
Has water repelling properties only.
Inhibits growth of micro-organisms.
Promotes growth of micro-organisms.
Non - flammable. Natural Mineral product.
Flammable. Petroleum product from the refinery.
Can be applied on damp surfaces.
Not suitable for application on damp surfaces.
Does not form surface film. Chemically bond and crystalized onto the cement.
Forms thin plastic film.
Penetrates into the substrate, adhere very strongly.
Coats substrate surface only. De-bond easily.
NATURAL MINERAL SILICATE
ACRYLIC/ LATEX
Formation
Chemically bond and crystalized onto the
cement. thus making the coating an integral part of substrate.
Forms a thin plastic film by the evapora-tion of water.
Breathability
Allows water vapor permeation. Wall is dry and healthy.
Restricts water vapor diffusion. Ended with wet wall, it blistered easily.
Color Fast
Colors do not fade due to excellent
resistance to UV.
Not UV stable. Significant fading of
colors will occur over time.
Dirt Retention
Does not carry electrostatic charge that
attracts dust.
Attracts dust due to negative electrostatic charge found on the plastic film surface.
Algae and
Fungal Growth
Natural mineral, does not promote growth of micro-organism.
Promotes growth of micro-organisms due to its organic composition.
Acid and
Alkalis
Highly resistant to strong acids and strong
alkaline.
Not as resistant to strong acids and strong alkaline.
Fire Retardant
Non-combustible, does not emit smoke or any toxic gases.
Petrochemicals product, burn and smoke easily in a fire.
Light
Reflectance
Reflects light and heat due to its micro-crystalline structure.
Absorbs a proportion of light rather than
1 ~ 9 | - | S$ 50.00 |
10++ | 5% OFF | S$ 47.50 |