Ppg 435 Sigmacover Epoxy Mio Coat (up to Dry Temp 200degC) ( Light Grey) Pack Size 20 Litres

• Best Uses

PPG SigmaCover 435 is best suited for use on exterior surfaces such as brick and steel in domestic, commercial and industrial surroundings which are exposed to harsh and extreme weather conditions.

This product cures at temperatures as low as -10°C and is resistant to temperatures as high as 200°C.

• Application

PPG SigmaCover 435 can be applied using a brush, roller or airless spray and leaves a touch dry finish in around 2-4 hours. Each litre of this products covers an area of roughly 6.3m2

• Surface and Environment

PPG SigmaCover 435 is designed for exterior surfaces such as brick and steel which are exposed to harsh weather conditions.

TECHNICAL

Features

• Two-component, high-build, micaceous iron oxide (MIO) pigmented, polyamide-cured, recoatable epoxy coating
• General-purpose epoxy build coat or finish in protective coating systems
• Suitable for steel and concrete structures exposed to atmospheric land or marine conditions
• Easy application by airless spray, air atomised spray, brush, or roller
• Cures at temperatures down to -10°C

Systems

• PPG 3102 System – Boot Top and Topside
• PPG 3103 System – Decks

Technical Information

• Components: Two part
• Type: MIO
• Finish: Eggshell
• Tintable: No
• VOC Content: 344 g/L
• Volume Solids: 63%
• Suitable Substrates: Steel, concrete
• Application Methods: Brush, Roller, Air Atomised Spray, Airless Spray
• Theoretical Coverage: 6.3 m²/L at 100 microns
• Dry Film Thickness (DFT): 75 – 150 microns
• Wet Film Thickness (WFT): –
• Induction Time: –
• Pot Life: 5 hours at 20°C
• Touch Dry: 2 hours at 20°C
• Overcoatable: After 3 hours at 20°C
• Fully Cured: 4 days at 20°C
• Cleaner / Thinner: PPG Thinner 91-92
• Shelf Life: Minimum 24 months (cool, dry storage)
• Packaging: 4 L and 20 L