WHERE TO USE
Mapesil AC is an acetic-crosslinking silicone sealant suitable for sealing glass, ceramic and anodised aluminium. After first having used a bonding enhancer, Primer FD can also be used on concrete, wood, metal, painted surfaces, plastic and rubber. Mapesil AC is used for:
TECHNICAL CHARACTERISTICS
Mapesil AC is a one component, acetic crosslinking, solvent-free silicone sealant, available coloured or transparent. It is a thixotropic paste which is easily trowellable both horizontally and vertically. It crosslinks following exposure to atmospheric humidity at ambient temperatures, and forms an elastic product with following properties:
RECOMMENDATIONS
Do not use Mapesil AC for exterior joints in exteriors between ceramic tiles and lightcoloured natural stone because dirt could accumulate by the joints. Use Mapesil LM.
APPLICATION PROCEDURE
Preparing and calculating joints size All the surfaces to receive the sealant must be dry solid and free from dust and loose particles, oils, grease, wax, old paint and rust. In order that the seal can carry out its function, provision must be made for it to elongate and compress freely. During application it is therefore necessary that:
To control the depth of the joint and to prevent Mapesil AC from adhering to the base, the bottom of the joint should be filled with a sized Mapefoam, a polyethylene cord.
Application of Primer FD Where the use of Primer FD is necessary, it must be applied with a small brush onto the appropriate areas of the joints and left to dry for several minutes to allow the solvent to evaporate. Then apply Mapesil AC.
Application of Mapesil AC
Mapesil AC is packed in cartridges of 310 ml; to use, cut the cartridge above the end of the thread and screw on the nozzle, which should be cut at 45° to produce a hole corresponding to the size of the joint. Insert the cartridge into the gun and extrude the sealant. The surface of Mapesil AC must be finished off with a damp tool, preferably moistened with soapy water, before a superficial film has formed.
Crosslinking
When exposed to air and humidity, Mapesil AC crosslinks and becomes elastic. The speed at which Mapesil AC crosslinks depends only slightly on temperature, but is fundamentally linked to humidity in the atmosphere. The graph shows the cross linking at +23°C and 50% humidity in the atmosphere.
Cleaning
To clean partially cross-linked Mapesil AC from tools and contaminated surfaces, common solvents may be used (e.g. ethyl acetate, petrol, toluene). Once cross-linking is complete, silicone rubber can only be cleaned mechanically.
COVERAGE
Mapesil AC: Coverage of Mapesil AC varies depending on the width of the joints. Some examples of coverage for end joints and triangular joints are shown in the chart. Primer FD: 100 g/m² .
PACKAGING
Mapesil AC: 310 ml cartridges. Primer FD: 0.9 kg and 0.2 kg bottles.
COLOURS
Mapesil AC is available in 30 colours from the “MAPEI COLOURED GROUTS” range plus transparent.
STORAGE
Mapesil AC can be stored 24 months in a dry cool place in original cartridges.
SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION
Mapesil AC is not considered as dangerous according to the current regulation regarding the classification of mixtures. We recommend the use of protective gloves and goggles and to take the usual precautions for handling chemical products. For further and complete information about the safe use of our product please refer to our latest version of the Material Safety Data sheet.
PRODUCT FOR PROFESSIONAL USE.
recommend storing it away from naked flames and sparks, to avoid smoking, to prevent the build up of electrostatic energy and to work in well ventilated areas. It irritates the eyes and skin, may cause drowsiness and dizziness and is harmful if inhaled, swallowed or enters the respiratory system. Suspected of affecting fertility. When applying the product, we recommend the use of protective gloves to prevent dry, chapped skin, safety goggles, and to take the usual precautions for handling chemical products. If the product comes into contact with the eyes or skin, wash immediately with plenty of clean water and seek medical attention. In case of poor ventilation, we recommend wearing the mask with filters. Do not use in the presence of pregnant women. For further and complete information about the safe use of our product please refer to our latest version of the Material Safety Data sheet.
PRODUCT ONLY FOR PROFESSIONAL USE.
WARNING
Although the technical details and recommendations contained in this product report correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long-term practical applications: for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application: in every case, the user alone is fully responsible for any consequences deriving from the use of the product.
1 ~ 4 | - | S$ 42.00 |
5++ | 10% OFF | S$ 37.80 |