eezee logo image

Loctite Epoxy Adhesive Hysol 907

LOCTITE logo
Model: EA 907 Hysol
Brand: LOCTITE

Product Details

Loctite® Hysol® 907 is a two component paste epoxy adhesive suitable for general purpose use. It is relatively insensitive to mix ratio and is tolerant of poorly prepared surfaces. The contrasting colours of the two components help identify when thoroughly mixed.

Specifications:

  • Tensile Strength, psi, ASTM D 638: 3100
  • Modulus, psi, ASTM D 638: 245,000
  • Elongation, %, ASTM D 638: 2.4
  • CTE, ASTM D 696, in/in/ °C: 45 x 10-6
  • Hardness, Shore D: 79
  • Quantity: Carton of 10 kits.
  • IDH: 420335 / 702136
  • Also known as: KT69GMEN or Hysol 608 or 83098

Directions for use:

  1. Before mixing, prepare surface to be clean, dry, and free of oil, grease or wax. Epoxy Adhesive bonds best when surfaces are thoroughly roughened with an emery cloth or sandpaper and cleaned with solved prior to applying adhesive.
  2. Mix both Resin and Hardener on a discardable, clean and dry flat surface.
  3. Squeeze an even amount of Resin and Hardener parallel to each other onto the mixing surface.
    Note: For an even cut-off, tilt tube firmly against mixing surface.
  4. Mix thoroughly until both Resin and Hardener blend into one uniform colour.
  5. Apply adhesive within 20 minutes after mixing.
  6. Store tubes with caps securely tightened until next use.

Cure Time/Process:

Full cure properties are obtained in 3 days. 90% of full cure properties can be achieved in 24 hrs. Cure may be accelerated by heat, such as 2 hours at 140°F.

Application:

Mixing - Bulk: Combine Part A (resin) and Part B (hardener) in the correct ratio and mix thoroughly until the colour and consistency are uniform. EPOXI-PATCH® Tube Kits have been designed so that squeezing EQUAL LENGTH BEADS of Part A & Part B will give proper ratio. Ratios given above can be used for measuring larger amounts. Mixing the adhesive just prior to use is recommended. Heat buildup during or after mixing is normal. Do not mix quantities greater than one pound as dangerous heat buildup can occur causing uncontrolled decomposition of the mixed adhesive. Mixing smaller quantities will minimise the heat buildup.

S$ 33.90
Free Shipping above SGD 600 spent in this shop
UnitsDiscount
1-
2 ~ 45%
5 ++10%

Similar Products

Loading Trending..

See More Categories

Hardware
Electrical
Office
Safety & Construction