Fowler Full Warranty Inside Xtra-Value Internal Electronic Caliper Gage, 54-554-730-0, 0.5-6" Measuring Range, 0.01" Accuracy

Brand : Fowler

Material : Stainless Steel

Measurement accuracy : 0.01"

About this item

• Measures 0 to 6"/0 to 150mm with 0.001"/0.02mm accuracy, and 0.0005"/0.01mm resolution for precise measurements
• Hardened stainless steel frame for corrosion resistance and long life, digital, single-value readout LCD shows inch or metric units for versatility when measuring
• Absolute and relative modes to take intermediate or differential measurements
• Certified to IP 67 level of protection against dust and short periods of immersion in water, lifetime warranty offered by Fowler High Precision, an American company

Product description

The Fowler Xtra-Value inside electronic caliper gage has an accuracy 0.01"/0.3mm/1/64ths with a 0.01"/0.1mm/1/64ths reading. The inside electronic caliper gage also has a reach of 4". This caliper gage has on/off/set function and Hold function. It also has direct inch, metric and fraction conversion for versatility.. This caliper measures ID for hole diameters and groove and tube thicknesses. The digital, single-value readout LCD shows inches, in decimal or fractions, or metric for versatility when measuring. The hold feature freezes the display for later viewing. The unit also has a set feature for taking intermediate or differential measurements. The knurled lock nut holds the spring-loaded sliding jaw in position and helps ensure a consistent measurement. The caliper arms and hardware are constructed of stainless steel for durability. The 2/5cm diameter electronic housing is constructed of plastic. The caliper uses a 3V CR2032 battery (included) for approximately one year of use. An automatic shut-off feature turns the caliper off after four minutes to prolong battery life. The unit also comes with a plastic case and instructions. Fowler also offers a lifetime warranty against materials and workmanship. If you experience any problem contact Fowler directly for warranty claims.

Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements that are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units.

Fowler, an American company, manufactures inspection and measurement instruments such as electronic indicators, calipers, bore gages, and digital scales. The company, founded in 1946, is headquartered in Newton, MA.