Enerpac Cylinder, Aluminum, 50 Ton, 10", S/A RAC5010
Model : RAC5010
Series : RAC
Product Lines : Industrial Tools
- Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side-loads of up to 10%
- Hard coat finish on all surfaces resists damage and extends cylinder life
- Handles included on all models 30 tons and above
- For protection against load-induced damage, a saddle is standard on all models and a steel baseplate is standard on models 20-ton and above.
- Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- High-strength return spring for rapid cylinder retraction
- CR-400 coupler and dust cap included on all models
- All cylinders meet ASME B-30.1 standards
Specifications
Maximum Operating Pressure (bar) 700
Capacity Class (tonnage) 50
Maximum Cylinder Capacity Advance (kN) 496
Stroke (mm) 250
Collapsed Height A (mm) 386
Extended Height B (mm) 636
Return Type Single-Acting, Spring Return
Plunger Type Solid
Material Aluminum
Cylinder Effective Area Advance (cm2) 70,9
Oil Capacity Advance (cm3) 1771
Surface Treatment Anodized
Weight (kg) 13,7
Outside Diameter D (mm) 130
Cylinder Bore Diameter E (mm) 95
Plunger Diameter F (mm) 80
Base to Advance Port H (mm) 30
Saddle Diameter J (mm) 50
Saddle Protrusion from Plunger K1 (mm) 24
Saddle Maximum Tilt Angle Radius (degrees) 5
Base Mounting Holes Bolt Circle U (mm) 110
Base Mounting Holes Thread V M6
Base Mounting Holes Thread Depth Z (mm) 12
