Enerpac Cylinder, Aluminium, 30 Ton, 2'', Hollow RACH302

Model : RACH302

Series : RACH

Product Lines : Industrial Tools

• Hollow plunger design allows for both pull and push forces
• Composite bearings increase cylinder life and side load resistance
• Hard coat finish on all surfaces resists damage and extends cylinder life
• Handles included on all models
• Floating center tube increases seal life
• Steel baseplate and saddle for protection against load-induced damage
• Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
• High-strength return spring for rapid cylinder retraction
• CR-400 coupler and dustcap included on all models
• All cylinders meet ASME B-30.1 standards

Maximum Operating Pressure (bar) 700

Capacity Class (tonnage) 30

Maximum Cylinder Capacity Advance (kN) 358

Stroke (mm) 50

Collapsed Height A (mm) 208

Extended Height B (mm) 258

Return Type Single-Acting, Spring Return

Plunger Type Hollow

Material Aluminum

Cylinder Effective Area Advance (cm2) 51,1

Oil Capacity Advance (cm3) 256

Surface Treatment Anodized

Weight (kg) 8,0

Outside Diameter D (mm) 130

Cylinder Bore Diameter E (mm)
95

Plunger Diameter F (mm) 70

Base to Advance Port H (mm) 29

Saddle Diameter J (mm) 70

Saddle Protrusion from Plunger K1 (mm) 10

Base Mounting Holes Bolt Circle U (mm) 110

Base Mounting Holes Thread V M6

Center Hole Diameter Y (mm) 34

Base Mounting Holes Thread Depth Z (mm) 12