CRC Urethane Seal Coat is an excellent adhering one component polyurethane coating. Its abrasive resistant insulation acts as a protective film. CRC Urethane Seal Coats are stable single component polyurethane coating that dries fast, adheres well and forms a hard, durable, flexible and non-conductive film.
- Humidity and salt spray resistant
- Provides heavy corrosion protection to preserve and lengthen useful life of equipment
- Offers protective resistance to shocks, abrasion and aggressive chem
- Stable, single component polyurethane (PU) coating
- Dries fast, adheres well and forms a hard, durable, flexible and non-conductive film
- Easy to apply, saves time and labour
- Protecting components from condensation and moisture
- Protecting printed circuit boards
- Insulates cables and wires
- Coating terminal strips, screw connections, and switch boxes that are exposed to atmospheric effects
- Coating for Electric motor windings, armature coils, commutator ends, transformer ends
- Coating for housings and bus bars
- Protective coating for tools
- Brand: CRC
- Product Type: Seal Coat Spray
- Container Size: 300g
- Colour: Red
- Finish: Colourless Or Red Film
- Odour: Organic Solvent
- Propellant: Hydrocarbon
- Container Type: Aerosol
- Dielectric Constant: 4.04 at 60Hz
- Boiling Point: 800°C
- Surface Resistance: 1.2 @ 10 ohms/cm
- Viscosity: 13s (Ford Cup)
- Volume Resistance: 8.4 @ 10 ohms/cm
- Breakdown Voltage: 20 kV/mm
- Drying Time: approx 1 hour
- Creep Resistance: 600V (DIN IEC112/VDE 0303 Part 1)
- Endurance Thermal Stability: 100°C
- Temporary Thermal Stability: 120°C
- Low Temperature Stability Minus: 70°C
- Corrosion Resistance: Up to 2 years outdoors
- Flash Point: 43°C Open Cup
- Volatile: 86%
- Specific Gravity: 0.86 ± 0.02
- Length: 6.5 cm
- Width: 6.5 cm
- Height: 21 cm