BEAM Fresh Pine Detergent & Disinfectant

Double-action disinfectant that deodorizes

These days it’s more important than ever to make sure the surfaces you use every day are clean as possible. With both pure pine oil and 3.2% Benzalkonium Chlorine (a QAC disinfectant effective against the coronavirus), BEAM Fresh Pine has double the fighting powers to help you eradicate dirt, germs, bacteria & viruses. Its special low foam, pH neutral formulation makes it perfect for disinfecting a wide range of surfaces, without the need for rinsing.

BEAM Fresh Pine is highly concentrated. Dilute in water up to 60X to make an effective disinfectant. This product can be diluted for mopping, wiping & spraying.

A 5-litre bottle makes up to 300 litres of effective disinfectant.

· Viruses and bacteria are killed within minutes (broad spectrum virucidal)

· Dries without residue – just mop or wash it onto a surface and let it evaporate to disinfect

· Non-corrosive formula is safe for almost any hard surface

· Pure pine oil leaves a clean hygienic scent after cleaning.

· Diluted formula can be sprayed on high touch areas intermittently throughout the day to prevent cross infection

· pH neutral

How to use BEAM Fresh Pine Detergent & Disinfectant?

BEAM Fresh Pine can be used for mopping, surface spraying & wiping

· For cleaning & effective disinfection, fill a pail with 10 litres of water, and add 170ml of BEAM Fresh Pine.

· *If surface is very greasy and dirty, clean the surface first. The same diluted BEAM Fresh Pine may be used to clean the dirty surface.

After cleaning the surface, you can then apply/spray the same solution on the surface to be disinfected and leave the surface to dry.

For effective disinfection, do not dilute more than 1 part BEAM Fresh Pine in 60 parts of water

Where can BEAM Fresh Pine detergent & disinfectant be used?

BEAM Fresh Pine can be used in on all types of hard surfaces, such as concrete floors, walls, lift buttons, handrails, bathroom taps & sinks. Recommended locations to use BEAM Fresh Pine detergent & disinfectant include clinics, shopping malls, stores, offices, lift lobbies etc. The solution leaves a clean hygienic scent after cleaning.

What is the difference between a detergent and a disinfectant?

A detergent is used for cleaning surfaces, such as removing dirt and grease from surfaces. A disinfectant is used for inhibiting the growth of microorganisms and killing microbes, including viruses, germs & bacteria on the surface. BEAM Fresh Pine Detergent & Disinfectant contains 3.2% Benzalkonium Chlorine, a disinfectant that has been recognized as being effective in eliminating 99.9% of germs, bacteria & viruses, including the coronavirus. This product saves time by combining making cleaning & disinfection* possible at the same time.