Bambu Lab 3D Printer
A1 Mini 3D Printer with AMS Lite

Goodbye to Tedious Manual Calibration And Tuning
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

No More "Paper Method"
A1 probes the bed with the nozzle to measure the absolute Z-offset. No need to stick a paper as reference.

Auto Tune Both X & Y Resonance Before Every Print
A1 has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.

Auto Monitoring And Adjusting The Belts
A1 can check the belt tension automatically through the vibration frequency calibration. If the belt tension is loose the HMS system will notify you to adjust the auto belt tensioner.

Load/Unload Filament With One Touch
No manual setting involved, A1 fully automated the filament load/unload process.

Swift Maintenance
Quick Swap Nozzles
All-new quick swap hotend design, the hotend pops in and out with just 1 clip.