A smooth, cement-based grout which can be used for tile joints 1mm to 4mm wide. For internal and external applications on walls and floors.
It contains water repellents. Improved work-ability helps ensure flush joints, which is most noticeable with rectified edged tiles.
WHITE GROUT is suitable for grouting indoors and outdoors.
PACKAGING: 1kg
Substrate Preparation
Ensure joints are clean and free from excess adhesive. With porous tiles, dampen joints and tile edges with water (but not so wet that water remains in the joints) before grouting to avoid dehydration of the grout. Do not grout until the adhesive has set firmly. All tile spacer must be removed from joints.
MIXING
Mix 0.2L of clean water to 1kg powder to achieve a non-sag, creamy paste. The mix should be used within 1 hour at 23°C and 50% relative humidity.
APPLICATION
Prior to grouting, it is advisable to check ease of cleaning with tiles that have a textured or matt surface.
In exterior conditions, it is essential to provide protection from all extremes of climate during the whole fixing and grouting operation and for as long as possible afterwards.
If the grout is to be sealed, allow at least 7 days before doing so.
DRYING TIME
Approximately 24 hours at 23°C and 50% RH. Allow longer for lower temperatures or high relative humidity.
COVERAGE
Depending on tile size, WHITE GROUT will have the following coverage: