Shopping List
Shopping List
SGD - S$
Image
/
/
/
/
3/4" X 1/2"NPT Female Stainless Steel SS316 Reduced Tee Pipe Fitting 150 Psi
3/4" X 1/2"NPT Female Stainless Steel SS316 Reduced Tee Pipe Fitting 150 Psi
Image
Image
Image
Image
Product Description

About This Product

A pipe tee is a T-shaped fitting. It has three ports, and it is used to connect tubes and pipes at a 90-degree angle to the main line. It can also divert the fluid flow. There are two types of pipe tee fittings, equal pipe tee and reducing pipe tee. The difference between reducing pipe tee with equal pipe tee lies in the opening size of the ports. Reducing pipe tee has 2 similar and 1 different port size. Reduced pipe tee connects tubes or pipes with different diameter together. The connection type for pipe tee fitting is three female ends. The NPT (tapered) thread on one end connection makes it easy to assemble and disassemble during maintenance and installation.

More About #150 Fittings

Class 150, or #150 fittings are categorized under low pressure fittings and are made in accordance with ​ASTM A351 standard. These fittings are commonly used to extend system pipeline and regulate low pressure fluid and gas. The maximum working pressure is up to 150 PSI. As such, they are the top selection when it comes to non-critical and low-cost applications in the water, oil, and gas (WOG) system. #150 fittings are threaded which provides a tighter seal upon installation. Do keep note that the connection needs to correspond to each other. The material used is stainless steel 316. This steel grade contains molybdenum (Mo), which increases the chemical and corrosion resistance as compared to the standard 304 grade.

  • The threaded ends ease installation and provide a tighter connection. Welding is not required.
  • Conform to ASTM A351 CF8M/316 grade. Made of stainless steel 316 for better resistance against corrosion and rust.
  • Ideal for low pressure, non-critical and low-cost applications as it has a working pressure up to 150 PSI.

How to Connect #150 Fittings?

  1. To install a class 150 fitting, use a Teflon tape/plumber’s tape to thread the male end to form a tighter seal.
  2. Remove any excess tape and tighten the joints.
  3. Do avoid excessive screwing as it may damage the pipe or the fitting.
  4. Finally, ensure that the alignment and size of the fitting and pipe are the same when making connection.
S$ 7.00
(exc. GST)
S$ 7.63
(inc. GST)
Image
Lead time of 3 working days required.
Item will be ready to dispatch within the lead time specified.
Quantity:
EA
Stock:
48 EA in stock
location
In Seller's Warehouse
This item is sold by
Image
SG-8088441545
Highly Matched Items
View items that have the same or are a close match to the specifications of this item
Pipe Tee from AF Hydro
Source & compare similar products
More from Pipe Tee
Expand your search with a wider selection
Recently Viewed Products
Compare & Refer to previously viewed items
Image
Top