12 Fibers MTP® Female Type 1 9/125 Single-Mode Fiber Loopback Module

US Conec MTP® Connector

Low Insertion Loss≤1.5dB, High Return Loss>50dB

Easy Insertion and Extraction with Push-pull Design

Used in Testing 40G or 100G MPO/MTP® Interface Transceivers

Designed for Troubleshooting Network Failure Nodes

MTP® loopback modules are used widely within testing environment especially within parallel optics 40/100G networks. Devices allow verification and testing of transceivers featuring MTP® interface – 40G PLR4 or 100G PSM4 devices. Loopbacks are built to link Transmitter (TX) and Receivers (RX) positions of MTP® transceivers interfaces. MTP® loopbacks can facilitate and speed up IL testing of optical networks segments by connecting them to MTP® trunks/patch leads.

Specifications

• Fiber type : 9/125 OS2 Single-Mode
• Fiber connector : MTP® Female, APC
• Return loss : SM>50dB
• Insertion loss : SM(G657.A2)≤1.5dB
• Insert-pull test : 50times, IL<0.5dB
• Size : 80mm*10mm
• Operation temperature : -40 to 75°C (-40 to 167°F)
• Jacket material : PC

MTP Fiber Loopback Module for Troubleshooting Fiber Networks

Fiber Loopback Module is designed to provide a media of return patch for a fiber optic signal. Typically it is used for fiber optic testing applications or network restorations.

lnsertion and Return Loss
lnsertion Loss: SM < 1.0dB and return loss: SM ≥ 50dB

Protective Dust Cap
Prevent the Loopback Module from dust and keep it clean

Standard Connector
Adopts 8/12/24 fibers with different types of polarity

Application in Data Center

Collocated with 40G or 100G MPO/MTP® interface transceiversLoopback module can be used for testing the transmission capability and receiver sensitivity of fiber optic network equipment.