This is a collection of our newest PLA. It's not only about quality of the filaments, we had to make sure to pay attention to spooling patterns, vacuum packing and a myriad of other factors. But we've done it. and here it is.
#Mekamaterials is envisioned to be a family of modern, high-quality and affordable 3D Printing materials for the everyday consumer.
PolyLactic Acid is an easy to use and affordable 3D printing Filament. It emits no odour and does not warp while printing. 3D prints made with PLA can also be painted with Acrylic Paints.
These 1kg spools are available in 13 amazing colors.
Tested for use on FlashForge Creator Pro, Dreamer, Guider 2 and many other 3D printers.
The specifications of #mekamaterials PLA 3D printing filaments are:
1. High precision dimension with 1.75+/-0.10mm range
2. Good roundness with 1.75+/-0.07mm range
Each one kg spool is approximately 340metres of material.
What’s more?
No heated bed is necessary for printing. A filament fan will provide the ability to print sharp and pointed parts.
Usage Instructions
Extruder Temperature: 190 - 230˚C
Printing platform: Bed with Blue Painters Tape/ Polycarbonate Boards
Printing Speeds: 90-120 mm/s
Travel Speeds: 90-120 mm/s
Please Note: Filament fan must be turned on for sharp corners and detailed printing.
1 ~ 9 | - | S$ 38.00 |
10++ | 10% OFF | S$ 34.20 |