RFS Hydraulics

Plumbing & Sanitary

plumbing-sanitary

Pipe Adaptor

pipe-adaptor

Pipe Elbow

pipe-elbow

RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 1/2 Swivel X 3/8 Npt F-J-S-US-N-08-06

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 1/2 Swivel X 3/8 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body

It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial.  Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread.  Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).

JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.

About JIC – FEMALE SWIVEL MALE CONNECTOR

Usage: Enables the rotation of fittings and hoses without causing excessive twisting and bending  

Thread: Female Swivel JIC end x NPT Male end 

Material: Stainless steel 316 with higher resistance against corrosion

Size range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPT

Working temperature: ​-60 °C to 200 °C

Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI

Cut the tube to the required length and flare the end to 37-degree before installation.

Lubricate the threads and the surface of the flare.

Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

<h3 class="md-block-header-three">RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 1/2 Swivel X 3/8 Npt F-J-S-US-N-08-06</h3>Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 1/2 Swivel X 3/8 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 StandardJIC-FEMALE SWIVEL MALE CONNECTOR WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About JIC – FEMALE SWIVEL MALE CONNECTORUsage: Enables the rotation of fittings and hoses without causing excessive twisting and bending Thread: Female Swivel JIC end x NPT Male end Material: Stainless steel 316 with higher resistance against corrosionSize range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS Cut the tube to the required length and flare the end to 37-degree before installation.Lubricate the threads and the surface of the flare.Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

<h3>RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 1/2 Swivel X 3/8 Npt F-J-S-US-N-08-06</h3>
Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 1/2 Swivel X 3/8 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard
JIC-FEMALE SWIVEL MALE CONNECTOR 
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About JIC – FEMALE SWIVEL MALE CONNECTOR
Usage: Enables the rotation of fittings and hoses without causing excessive twisting and bending&nbsp;&nbsp;
Thread: Female Swivel JIC end x NPT Male end&nbsp;
Material: Stainless steel 316 with higher resistance against corrosion
Size range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS&nbsp;
Cut the tube to the required length and flare the end to 37-degree before installation.
Lubricate the threads and the surface of the flare.
Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

AF Hydro

Oleo Tecnica

BOTHWELL

LAME

Stauff

Others

MJ Technos

LY Metal

Flanges

Pipe Clamps

Pipe Coupling

Ferrule Fittings

Pipe Nipple

Pipe Tee

Camlock Fittings

Copper Tubing

Kelvin How

buyerIntroduction

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 1/2" Swivel X 3/8" Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

rfs stainless steel ss316 jic female swivel male connector, 1/2" 3/8" npt, adjustable adapter connector tube hose, 37-degree flared compression fitting, sae j514 standard hidraulik 1/2 3/8 npt f-j-s-us-n-08-06 pipe adaptor pipa hydraulics keluli tahan karat perempuan pusing penyambung lelaki, penyesuai paip hydraulics/rfs 液压 不锈钢 内螺纹旋转外螺纹连接器，1/2 旋转

rfs-stainless-steel-ss316-jic-female-swivel-male-connector-1-2-swivel-x-3-8-npt-adjustable-adapter-connector-for-tube-and-hose-37-degree-flared-compression-fitting-sae-j514-standard

RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 1/4 Npt F-J-S-US-N-06-04

RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 1/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard F-J-S-US-N-06-04

<h3 class="md-block-header-three">RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 1/4 Npt F-J-S-US-N-06-04</h3>RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 1/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard F-J-S-US-N-06-04JIC-FEMALE SWIVEL MALE CONNECTOR WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About JIC – FEMALE SWIVEL MALE CONNECTORUsage: Enables the rotation of fittings and hoses without causing excessive twisting and bending Thread: Female Swivel JIC end x NPT Male end Material: Stainless steel 316 with higher resistance against corrosionSize range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS Cut the tube to the required length and flare the end to 37-degree before installation.Lubricate the threads and the surface of the flare.Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

<h3>RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 1/4 Npt F-J-S-US-N-06-04</h3>
RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 1/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard F-J-S-US-N-06-04
JIC-FEMALE SWIVEL MALE CONNECTOR 
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About JIC – FEMALE SWIVEL MALE CONNECTOR
Usage: Enables the rotation of fittings and hoses without causing excessive twisting and bending&nbsp;&nbsp;
Thread: Female Swivel JIC end x NPT Male end&nbsp;
Material: Stainless steel 316 with higher resistance against corrosion
Size range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS&nbsp;
Cut the tube to the required length and flare the end to 37-degree before installation.
Lubricate the threads and the surface of the flare.
Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8" Swivel X 1/4" Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

rfs stainless steel ss316 jic female swivel male connector, 3/8" 1/4" npt, adjustable adapter connector tube hose, 37-degree flared compression fitting, sae j514 standard hidraulik 3/8 1/4 npt f-j-s-us-n-06-04 pipe adaptor pipa hydraulics keluli tahan karat perempuan pusing penyambung lelaki, penyesuai paip hydraulics/rfs 液压 不锈钢 内螺纹旋转外螺纹连接器，3/8 旋转

rfs-stainless-steel-ss316-jic-female-swivel-male-connector-3-8-swivel-x-1-4-npt-adjustable-adapter-connector-for-tube-and-hose-37-degree-flared-compression-fitting-sae-j514-standard

RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 3/4 Npt  F-J-S-US-N-06-12

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 3/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

<h3 class="md-block-header-three">RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 3/4 Npt F-J-S-US-N-06-12</h3>Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 3/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 StandardJIC-FEMALE SWIVEL MALE CONNECTOR WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About JIC – FEMALE SWIVEL MALE CONNECTORUsage: Enables the rotation of fittings and hoses without causing excessive twisting and bending Thread: Female Swivel JIC end x NPT Male end Material: Stainless steel 316 with higher resistance against corrosionSize range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS Cut the tube to the required length and flare the end to 37-degree before installation.Lubricate the threads and the surface of the flare.Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

<h3>RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 3/4 Npt F-J-S-US-N-06-12</h3>
Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8 Swivel X 3/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard
JIC-FEMALE SWIVEL MALE CONNECTOR 
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About JIC – FEMALE SWIVEL MALE CONNECTOR
Usage: Enables the rotation of fittings and hoses without causing excessive twisting and bending&nbsp;&nbsp;
Thread: Female Swivel JIC end x NPT Male end&nbsp;
Material: Stainless steel 316 with higher resistance against corrosion
Size range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS&nbsp;
Cut the tube to the required length and flare the end to 37-degree before installation.
Lubricate the threads and the surface of the flare.
Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 3/8" Swivel X 3/4" Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

rfs stainless steel ss316 jic female swivel male connector, 3/8" 3/4" npt, adjustable adapter connector tube hose, 37-degree flared compression fitting, sae j514 standard hidraulik 3/8 3/4 npt f-j-s-us-n-06-12 pipe adaptor pipa hydraulics keluli tahan karat perempuan pusing penyambung lelaki, penyesuai paip hydraulics/rfs 液压 不锈钢 内螺纹旋转外螺纹连接器，3/8 旋转

rfs-stainless-steel-ss316-jic-female-swivel-male-connector-3-8-swivel-x-3-4-npt-adjustable-adapter-connector-for-tube-and-hose-37-degree-flared-compression-fitting-sae-j514-standard

RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/8 Npt F-J-S-US-N-10-06

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/8 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

<h3 class="md-block-header-three">RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/8 Npt F-J-S-US-N-10-06</h3>Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/8 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 StandardJIC-FEMALE SWIVEL MALE CONNECTOR WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About JIC – FEMALE SWIVEL MALE CONNECTORUsage: Enables the rotation of fittings and hoses without causing excessive twisting and bending Thread: Female Swivel JIC end x NPT Male end Material: Stainless steel 316 with higher resistance against corrosionSize range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS Cut the tube to the required length and flare the end to 37-degree before installation.Lubricate the threads and the surface of the flare.Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

<h3>RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/8 Npt F-J-S-US-N-10-06</h3>
Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/8 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard
JIC-FEMALE SWIVEL MALE CONNECTOR 
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About JIC – FEMALE SWIVEL MALE CONNECTOR
Usage: Enables the rotation of fittings and hoses without causing excessive twisting and bending&nbsp;&nbsp;
Thread: Female Swivel JIC end x NPT Male end&nbsp;
Material: Stainless steel 316 with higher resistance against corrosion
Size range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS&nbsp;
Cut the tube to the required length and flare the end to 37-degree before installation.
Lubricate the threads and the surface of the flare.
Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8" Swivel X 3/8" Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

rfs stainless steel ss316 jic female swivel male connector, 5/8" 3/8" npt, adjustable adapter connector tube hose, 37-degree flared compression fitting, sae j514 standard hidraulik 5/8 3/8 npt f-j-s-us-n-10-06 pipe adaptor pipa hydraulics keluli tahan karat perempuan pusing penyambung lelaki, penyesuai paip hydraulics/rfs 液压 不锈钢 内螺纹旋转外螺纹连接器，5/8 旋转

rfs-stainless-steel-ss316-jic-female-swivel-male-connector-5-8-swivel-x-3-8-npt-adjustable-adapter-connector-for-tube-and-hose-37-degree-flared-compression-fitting-sae-j514-standard

RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/4 Npt F-J-S-US-N-10-12

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

<h3 class="md-block-header-three">RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/4 Npt F-J-S-US-N-10-12</h3>Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 StandardJIC-FEMALE SWIVEL MALE CONNECTOR WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About JIC – FEMALE SWIVEL MALE CONNECTORUsage: Enables the rotation of fittings and hoses without causing excessive twisting and bending Thread: Female Swivel JIC end x NPT Male end Material: Stainless steel 316 with higher resistance against corrosionSize range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS Cut the tube to the required length and flare the end to 37-degree before installation.Lubricate the threads and the surface of the flare.Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

<h3>RFS Hydraulics Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/4 Npt F-J-S-US-N-10-12</h3>
Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8 Swivel X 3/4 Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard
JIC-FEMALE SWIVEL MALE CONNECTOR 
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About JIC – FEMALE SWIVEL MALE CONNECTOR
Usage: Enables the rotation of fittings and hoses without causing excessive twisting and bending&nbsp;&nbsp;
Thread: Female Swivel JIC end x NPT Male end&nbsp;
Material: Stainless steel 316 with higher resistance against corrosion
Size range: (1/4” – 1 ½”) Swivel X (1/8” – 1 ½”) NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS&nbsp;
Cut the tube to the required length and flare the end to 37-degree before installation.
Lubricate the threads and the surface of the flare.
Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.

Rfs Stainless Steel SS316 Jic Female Swivel Male Connector, 5/8" Swivel X 3/4" Npt, Adjustable Adapter Connector for Tube and Hose, 37-Degree Flared Compression Fitting, Sae J514 Standard

rfs stainless steel ss316 jic female swivel male connector, 5/8" 3/4" npt, adjustable adapter connector tube hose, 37-degree flared compression fitting, sae j514 standard hidraulik 5/8 3/4 npt f-j-s-us-n-10-12 pipe adaptor pipa hydraulics keluli tahan karat perempuan pusing penyambung lelaki, penyesuai paip hydraulics/rfs 液压 不锈钢 内螺纹旋转外螺纹连接器，5/8 旋转

rfs-stainless-steel-ss316-jic-female-swivel-male-connector-5-8-swivel-x-3-4-npt-adjustable-adapter-connector-for-tube-and-hose-37-degree-flared-compression-fitting-sae-j514-standard

Rfs Stainless Steel SS316 Jic Male Connector, 3/8" Jic X 1/8 Npt, 37-Degree Flared Compression Fitting, Jic Adapter for Tube and Hoses, Sae J514 Standard F-J-S-MC-N-06-02

Usage: Used in installation of hoses. Straight JIC male connector with threaded JIC and NPT ends.

Size range: (1/4” – 2”) JIC X (1/8” – 2”) NPT

RFS Stainless Steel SS316 JIC Male Connector, 3/8" JIC x 1/8” NPT, 37-Degree Flared Compression Fitting, JIC Adapter for Tube and Hoses, SAE J514 Standard

<h3 class="md-block-header-three">Rfs Stainless Steel SS316 Jic Male Connector, 3/8&quot; Jic X 1/8 Npt, 37-Degree Flared Compression Fitting, Jic Adapter for Tube and Hoses, Sae J514 Standard F-J-S-MC-N-06-02</h3>JIC – MALE CONNECTOR (JIC X NPT)WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About JIC – MALE CONNECTOR (JIC X NPT)Usage: Used in installation of hoses. Straight JIC male connector with threaded JIC and NPT ends.Thread: Male JIC x Male NPTMaterial: Stainless steel 316 with higher resistance against corrosionSize range: (1/4” – 2”) JIC X (1/8” – 2”) NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS <ol class="md-block-ordered-list-item"><li>Cut the tube to the required length and flare the end to 37-degree before installation.</li><li>Lubricate the threads and the surface of the flare.</li><li>Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.</li></ol>RFS Stainless Steel SS316 JIC Male Connector, 3/8&quot; JIC x 1/8” NPT, 37-Degree Flared Compression Fitting, JIC Adapter for Tube and Hoses, SAE J514 StandardJIC-MALE CONNECTOR3/8&quot;JIC x 1/8&quot;NPT SS316 MALE	CONNECTOR,M x MSPECIFICATION<ul class="md-block-unordered-list-item"><li>BRAND 	 : RFS</li><li>EAN 		 : 8886481701290</li><li>SKU 		 : HMC-6T-2N-SS</li><li>PART NO 	 : F-J-S-MC-N-06-02</li><li>ROUND WEIGHT(KG) : 0.025</li><li>LENGTH (MM)	 : 36.32</li><li>WIDTH (MM)	 : 14.2</li><li>HEIGHT (MM)	 : 14.2</li></ul>

<h3>Rfs Stainless Steel SS316 Jic Male Connector, 3/8" Jic X 1/8 Npt, 37-Degree Flared Compression Fitting, Jic Adapter for Tube and Hoses, Sae J514 Standard F-J-S-MC-N-06-02</h3>
JIC – MALE CONNECTOR (JIC X NPT)
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About JIC – MALE CONNECTOR (JIC X NPT)
Usage: Used in installation of hoses. Straight JIC male connector with threaded JIC and NPT ends.
Thread: Male JIC x Male NPT
Material: Stainless steel 316 with higher resistance against corrosion
Size range: (1/4” – 2”) JIC X (1/8” – 2”) NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS 
<ol>
<li>Cut the tube to the required length and flare the end to 37-degree before installation.</li>
<li>Lubricate the threads and the surface of the flare.</li>
<li>Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.</li>
</ol>
RFS Stainless Steel SS316 JIC Male Connector, 3/8" JIC x 1/8” NPT, 37-Degree Flared Compression Fitting, JIC Adapter for Tube and Hoses, SAE J514 Standard
JIC-MALE CONNECTOR
3/8"JIC x 1/8"NPT SS316 MALE	
CONNECTOR,M x M
SPECIFICATION
<ul>
<li>BRAND 	 : RFS</li>
<li>EAN 		 : 8886481701290</li>
<li>SKU 		 : HMC-6T-2N-SS</li>
<li>PART NO 	 : F-J-S-MC-N-06-02</li>
<li>ROUND WEIGHT(KG) : 0.025</li>
<li>LENGTH (MM)	 : 36.32</li>
<li>WIDTH (MM)	 : 14.2</li>
<li>HEIGHT (MM)	 : 14.2</li>
</ul>

Rfs Stainless Steel SS316 Jic Male Connector, 3/8" Jic X 1/8" Npt, 37-Degree Flared Compression Fitting, Jic Adapter for Tube and Hoses, Sae J514 Standard

rfs stainless steel ss316 jic male connector, 3/8" 1/8" npt, 37-degree flared compression fitting, adapter tube hoses, sae j514 standard konektor male, 1/8 pemasangan kompresi menyala 37 derajat, adaptor untuk tabung dan selang, standar f-j-s-mc-n-06-02 pipe pipa hydraulics keluli tahan karat penyambung lelaki, mampatan bernyala darjah, penyesuai tiub hos, paip hydraulics/rfs 液压 不锈钢 外螺纹接头，3/8" npt，37 度喇叭形压缩接头，用于管子和软管的 适配器，sae 标准 1/8

rfs-stainless-steel-ss316-jic-male-connector-3-8-jic-x-1-8-npt-37-degree-flared-compression-fitting-jic-adapter-for-tube-and-hoses-sae-j514-standard

Rfs Stainless Steel SS316 Jic 90-Degree Male Elbow, 3/8" Jic X 3/8 Npt, 37-Degree Flared Compression Fitting, Jic Flared Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L90M-N-06-06

Usage: To connect and disconnect pipes at 45-degree angle

Thread: JIC Male thread x NPT Male thread

Size range: 3/8”-1 ½” JIC X 3/8”-1 ½” NPT

<h3 class="md-block-header-three">Rfs Stainless Steel SS316 Jic 90-Degree Male Elbow, 3/8&quot; Jic X 3/8 Npt, 37-Degree Flared Compression Fitting, Jic Flared Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L90M-N-06-06</h3>WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About 45D ELBOW FITTINGUsage: To connect and disconnect pipes at 45-degree angleThread: JIC Male thread x NPT Male threadMaterial: Stainless steel 316 with higher resistance against corrosionSize range: 3/8”-1 ½” JIC X 3/8”-1 ½” NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS <ol class="md-block-ordered-list-item"><li>Cut the tube to the required length and flare the end to 37-degree before installation.</li><li>Lubricate the threads and the surface of the flare.</li><li>Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.</li></ol>

<h3>Rfs Stainless Steel SS316 Jic 90-Degree Male Elbow, 3/8" Jic X 3/8 Npt, 37-Degree Flared Compression Fitting, Jic Flared Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L90M-N-06-06</h3>
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About 45D ELBOW FITTING
Usage: To connect and disconnect pipes at 45-degree angle
Thread: JIC Male thread x NPT Male thread
Material: Stainless steel 316 with higher resistance against corrosion
Size range: 3/8”-1 ½” JIC X 3/8”-1 ½” NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS 
<ol>
<li>Cut the tube to the required length and flare the end to 37-degree before installation.</li>
<li>Lubricate the threads and the surface of the flare.</li>
<li>Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.</li>
</ol>

Rfs Stainless Steel SS316 Jic 90-Degree Male Elbow, 3/8" Jic X 3/8" Npt, 37-Degree Flared Compression Fitting, Jic Flared Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard

rfs stainless steel ss316 jic 90-degree male elbow, 3/8" npt, 37-degree flared compression fitting, elbow connector adapter tube hoses, sae j514 standard 3/8 adaptor konektor untuk tabung dan selang, standar f-j-s-l90m-n-06 -06 pipe pipa siku hydraulics keluli tahan karat lelaki 90 darjah, pemasangan mampatan bernyala 37 penyesuai penyambung tiub hos, paip hydraulics/rfs 液压 不锈钢 度外螺纹弯头，3/8" npt，37 度喇叭形压缩接头，jic 喇叭形弯头接头适配器，用于管和软管，sae 标准 3/8 f-j-s-l90m-n-06-06

rfs-stainless-steel-ss316-jic-90-degree-male-elbow-3-8-jic-x-3-8-npt-37-degree-flared-compression-fitting-jic-flared-elbow-connector-adapter-for-tube-and-hoses-sae-j514-standard

Rfs Stainless Steel SS316 Jic 45-Degree Male Elbow, 3/8" Jic X 3/8 Npt, 37-Degree Flared Compression Fitting, Jic Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L45M-N-06-06

<h3 class="md-block-header-three">Rfs Stainless Steel SS316 Jic 45-Degree Male Elbow, 3/8&quot; Jic X 3/8 Npt, 37-Degree Flared Compression Fitting, Jic Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L45M-N-06-06</h3>WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About 45D ELBOW FITTINGUsage: To connect and disconnect pipes at 45-degree angleThread: JIC Male thread x NPT Male threadMaterial: Stainless steel 316 with higher resistance against corrosionSize range: 3/8”-1 ½” JIC X 3/8”-1 ½” NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS <ol class="md-block-ordered-list-item"><li>Cut the tube to the required length and flare the end to 37-degree before installation.</li><li>Lubricate the threads and the surface of the flare.</li><li>Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.</li></ol>

<h3>Rfs Stainless Steel SS316 Jic 45-Degree Male Elbow, 3/8" Jic X 3/8 Npt, 37-Degree Flared Compression Fitting, Jic Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L45M-N-06-06</h3>
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About 45D ELBOW FITTING
Usage: To connect and disconnect pipes at 45-degree angle
Thread: JIC Male thread x NPT Male thread
Material: Stainless steel 316 with higher resistance against corrosion
Size range: 3/8”-1 ½” JIC X 3/8”-1 ½” NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS 
<ol>
<li>Cut the tube to the required length and flare the end to 37-degree before installation.</li>
<li>Lubricate the threads and the surface of the flare.</li>
<li>Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.</li>
</ol>

Rfs Stainless Steel SS316 Jic 45-Degree Male Elbow, 3/8" Jic X 3/8" Npt, 37-Degree Flared Compression Fitting, Jic Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard

rfs stainless steel ss316 jic 45-degree male elbow, 3/8" npt, 37-degree flared compression fitting, elbow connector adapter tube hoses, sae j514 standard 3/8 adaptor konektor untuk tabung dan selang, standar f-j-s-l45m-n-06- 06 pipe pipa siku hydraulics keluli tahan karat lelaki 45 darjah, pemasangan mampatan bernyala 37 penyesuai penyambung tiub hos, paip hydraulics/rfs 液压 不锈钢 度外螺纹弯头，3/8" npt，37 度扩口压缩接头，用于管和软管的 弯头接头适配器，sae 标准 3/8 f-j-s-l45m-n-06-06

rfs-stainless-steel-ss316-jic-45-degree-male-elbow-3-8-jic-x-3-8-npt-37-degree-flared-compression-fitting-jic-elbow-connector-adapter-for-tube-and-hoses-sae-j514-standard

Rfs Stainless Steel SS316 Jic 90-Degree Male Elbow, 3/4" Jic X 1/2 Npt, 37-Degree Flared Compression Fitting, Jic Flared Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L90M-N-12-08

<h3 class="md-block-header-three">Rfs Stainless Steel SS316 Jic 90-Degree Male Elbow, 3/4&quot; Jic X 1/2 Npt, 37-Degree Flared Compression Fitting, Jic Flared Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L90M-N-12-08</h3>WHAT IS JIC FITTING?JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and bodyIt is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.About 45D ELBOW FITTINGUsage: To connect and disconnect pipes at 45-degree angleThread: JIC Male thread x NPT Male threadMaterial: Stainless steel 316 with higher resistance against corrosionSize range: 3/8”-1 ½” JIC X 3/8”-1 ½” NPTWorking temperature: ​-60 °C to 200 °CWorking pressure: Depending on the type and size of fitting, can withstand up to 6200 PSISTEPS TO INSTALL JIC FITTINGS <ol class="md-block-ordered-list-item"><li>Cut the tube to the required length and flare the end to 37-degree before installation.</li><li>Lubricate the threads and the surface of the flare.</li><li>Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.</li></ol>

<h3>Rfs Stainless Steel SS316 Jic 90-Degree Male Elbow, 3/4" Jic X 1/2 Npt, 37-Degree Flared Compression Fitting, Jic Flared Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard F-J-S-L90M-N-12-08</h3>
WHAT IS JIC FITTING?
JIC fittings are manufactured in compliance with ISO 8434-2 and SAE J514 standards. JIC is also known as flared fittings as it has 37-degree flared seating, which is different from NPT thread. JIC is applied with the assembly of hoses, used to connect various tube sizes with sleeve and nut. A complete set of JIC fittings includes sleeve, nut and body
It is suitable to be applied in general application where the fluid is conveyed under high pressure such as hydraulics or industrial. Fitting sizes are designed according to outer diameter of tubes and to be used to connect various types of tube ends. JIC fittings with NPT thread are able withstand higher pressure, temperature, and resistance than NPT thread. Depending on the type and size of fitting, the maximum working pressure is up to 6200 PSI (430 Bars). There are also several connection types; Type 1: JIC (1st connection) x JIC (2nd connection), Type 2: JIC (1st connection) x BSPP (2nd connection), and Type 3: JIC (1st connection) x NPT (2nd connection).
JIC fittings are available in either stainless steel, carbon steel or brass material. The JIC fitting made from stainless steel 316 grade is with higher resistance against corrosion and rust, and it can withstand temperature between ​-60 °C to 200 °C.
About 45D ELBOW FITTING
Usage: To connect and disconnect pipes at 45-degree angle
Thread: JIC Male thread x NPT Male thread
Material: Stainless steel 316 with higher resistance against corrosion
Size range: 3/8”-1 ½” JIC X 3/8”-1 ½” NPT
Working temperature: ​-60 °C to 200 °C
Working pressure: Depending on the type and size of fitting, can withstand up to 6200 PSI
STEPS TO INSTALL JIC FITTINGS 
<ol>
<li>Cut the tube to the required length and flare the end to 37-degree before installation.</li>
<li>Lubricate the threads and the surface of the flare.</li>
<li>Insert the nut and sleeve onto the tube end connection. Align the components and turn the flare nut until the sealing surface is fully contacted.</li>
</ol>

Rfs Stainless Steel SS316 Jic 90-Degree Male Elbow, 3/4" Jic X 1/2" Npt, 37-Degree Flared Compression Fitting, Jic Flared Elbow Connector Adapter for Tube and Hoses, Sae J514 Standard

rfs stainless steel ss316 jic 90-degree male elbow, 3/4" 1/2" npt, 37-degree flared compression fitting, elbow connector adapter tube hoses, sae j514 standard 1/2 adaptor konektor untuk tabung dan selang, standar f-j-s-l90m-n-12 -08 pipe pipa siku hydraulics keluli tahan karat lelaki 90 darjah, pemasangan mampatan bernyala 37 penyesuai penyambung tiub hos, paip hydraulics/rfs 液压 不锈钢 度外螺纹弯头，3/4" 1/2ª npt，37 度喇叭形压缩接头，jic 喇叭形弯头接头适配器，用于管子和软管，sae 标准 1/2 f-j-s-l90m-n-12-08

rfs-stainless-steel-ss316-jic-90-degree-male-elbow-3-4-jic-x-1-2-npt-37-degree-flared-compression-fitting-jic-flared-elbow-connector-adapter-for-tube-and-hoses-sae-j514-standard