Wago

Interface Modules

interface-modules

电气 & 电力

Electrical & Power

electrical & power

Tenaga Listrik

Elektrik & Kuasa

ไฟฟ้าและพลังงาน

electrical-power

自动化 & 控制

Automation & Controls

automation & controls

Otomatisasi & Kontrol

Automasi & Kawalan

ระบบอัตโนมัติและการควบคุม

automation-controls

Wago 750-504 Module Field Bus Out 4C Digital

This digital output module transmits control signals from the automation device to the connected actuators.

Field and system levels are electrically isolated.

Actuator connection: 2 x (2-wire, 3-wire); A suitable field side connection module (e.g., 750-614) must also be used to connect other actuators.

Output characteristic: high-side switching

Load type: Resistive, inductive, lamp load

Inductive load switch-off energy dissipation (max.): 0.3J

Supply voltage (system): 5 VDC; via data contacts

Current consumption (5 V system supply): 10mA

Supply voltage: (field)	24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (supply voltage field side only) via spring contact)

Current consumption, field supply (module with no external load):	30mA

Indicators: LED (A-D) green: Status DO 1 … DO 4

Number of incoming power jumper contacts: 2

Number of outgoing power jumper contacts: 2

Current carrying capacity (power jumper contacts): 10A

<h3 class="md-block-header-three">Wago 750-504 Module Field Bus Out 4C Digital</h3> This digital output module transmits control signals from the automation device to the connected actuators.All outputs are short-circuit-protected.Field and system levels are electrically isolated.<ul class="md-block-unordered-list-item"><li>Number of digital outputs	:4</li><li>Total number of channels (module): 4</li><li>Signal type: Digital</li><li>Signal type (voltage): 24 VDC</li><li>Actuator connection: 2 x (2-wire, 3-wire); A suitable field side connection module (e.g., 750-614) must also be used to connect other actuators.</li><li>Output characteristic: high-side switching</li><li>Output current per channel: 0.5A</li><li>Output current: short-circuit-protected</li><li>Switching frequency (max.): 1 kHz</li><li>Load type: Resistive, inductive, lamp load</li><li>Inductive load switch-off energy dissipation (max.): 0.3J</li><li>Output data width (internal) max.: 4Bit</li><li>Supply voltage (system): 5 VDC; via data contacts</li><li>Current consumption (5 V system supply): 10mA</li><li>Supply voltage: (field)	24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (supply voltage field side only) via spring contact)</li><li>Current consumption, field supply (module with no external load):	30mA</li><li>Isolation: 500 V system/field</li><li>Indicators: LED (A-D) green: Status DO 1 … DO 4</li><li>Number of incoming power jumper contacts: 2</li><li>Number of outgoing power jumper contacts: 2</li><li>Current carrying capacity (power jumper contacts): 10A</li></ul>

<h3>Wago 750-504 Module Field Bus Out 4C Digital</h3>
&nbsp;
This digital output module transmits control signals from the automation device to the connected actuators.
All outputs are short-circuit-protected.
Field and system levels are electrically isolated.
<ul>
<li>Number of digital outputs	:4</li>
<li>Total number of channels (module): 4</li>
<li>Signal type: Digital</li>
<li>Signal type (voltage): 24 VDC</li>
<li>Actuator connection: 2 x (2-wire, 3-wire); A suitable field side connection module (e.g., 750-614) must also be used to connect other actuators.</li>
<li>Output characteristic: high-side switching</li>
<li>Output current per channel: 0.5A</li>
<li>Output current: short-circuit-protected</li>
<li>Switching frequency (max.): 1 kHz</li>
<li>Load type: Resistive, inductive, lamp load</li>
<li>Inductive load switch-off energy dissipation (max.): 0.3J</li>
<li>Output data width (internal) max.: 4Bit</li>
<li>Supply voltage (system): 5 VDC; via data contacts</li>
<li>Current consumption (5 V system supply): 10mA</li>
<li>Supply voltage: (field)	24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (supply voltage field side only) via spring contact)</li>
<li>Current consumption, field supply (module with no external load):	30mA</li>
<li>Isolation: 500 V system/field</li>
<li>Indicators: LED (A-D) green: Status DO 1 … DO 4</li>
<li>Number of incoming power jumper contacts: 2</li>
<li>Number of outgoing power jumper contacts: 2</li>
<li>Current carrying capacity (power jumper contacts): 10A</li>
</ul>

Merek:	Wago
Model:	750-504

Modul Wago 750-504 Field Bus Out 4C Digital