水泥

Cements

Semen

Simen

ซีเมนต์

cements

施工

Construction

construction

Konstruksi

Pembinaan

การก่อสร้าง

建筑材料

Building Materials

building materials

Bahan Bangunan

Bahan Binaan

วัสดุก่อสร้าง

building-materials

• Improved bonding strength by 2 to 3 times to 30.57 kg/cm2. Especially good for bonding  homogeneous tiles, granites and marble tiles, and to prevent staining. 

• Increased flexural and compressive strength by 40% to 100%. Compressive strength to 56.00 N/mm2 . Flexural strength to 10.00 N/mm2 . (ASTM C 39). 

• Quicken cement setting time. Reduced surface cracking and dusting, forming a very tight seal. Good for wall plaster, wet area and swimming pool waterproofing. 

• 10 to 20 times more resistant to oil, salt water, chloride, acid and vapour penetration. A feature  particularly important in steel reinforced concrete structure. 

• Improved plasticity and flow (ASTM C 124-71), easier to work with, reduces porosity. 

• W1 cement strengthener is deemed to be suitable for use in contact with water intended for human consumption tested against SS375 : 2001. 

• The amount of water needed is 24 % by weight of cement. 

• This can be replaced totally with 24 % or lesser of W1 for optimum performance. 

Tile Bonding Aid, Grouting Vapour & Waterproofing: 

• Dilute W1 + Water = 1 + 1 by Volume, before adding into the Cement. 

• It will waterproof and bond tiles very strongly onto glass, glazed tile, steel and wood. Fine silica sand of 0.5 mm diameter can be added for grouting the tile joints. 

• Thinly brush a coat the Old tile surface with W1 + Cement to about 1.0-mm. 

• While it is still wet, bond on the tile. 

 Wall Plaster & Cement Mortar for diverse range of Sealing, Repairs & Waterproofing: 

• Wall plastering, spalling concrete, corrosion preventing prime coat on reinforced steel bar, mending worn out floor and holes, patching works around piping, re-pointing of brick works, tile joints, sealing of old concrete, Asbestos sheet, fish tank & swimming pool. 

Coating or Injection into Floor Screed, Wall & Absorbent Surface to Prevent Seepage & Waterproof: 

• Use W1 or Mix W1 + W5 MULTI-BOND, dilute as needed, to coat, or inject into the brick or cement, to seal up porosity. Injection pressure is 100 psi. Normal drying time is 10 days at 30°C. 

Slant Shear Bond Strength: Type 1 9.7 N/mm2  

                                                   Type 2 10.5 N/mm2  

FEATURES Cement added with W1 will have • Improved bonding strength by 2 to 3 times to 30.57 kg/cm2. Especially good for bonding homogeneous tiles, granites and marble tiles, and to prevent staining. • Increased flexural and compressive strength by 40% to 100%. Compressive strength to 56.00 N/mm2 . Flexural strength to 10.00 N/mm2 . (ASTM C 39). • Quicken cement setting time. Reduced surface cracking and dusting, forming a very tight seal. Good for wall plaster, wet area and swimming pool waterproofing. • 10 to 20 times more resistant to oil, salt water, chloride, acid and vapour penetration. A feature particularly important in steel reinforced concrete structure. • Improved plasticity and flow (ASTM C 124-71), easier to work with, reduces porosity. • W1 cement strengthener is deemed to be suitable for use in contact with water intended for human consumption tested against SS375 : 2001. APPLICATION METHOD Based on Cement: Sand ratio of 1: 3. • The amount of water needed is 24 % by weight of cement. • This can be replaced totally with 24 % or lesser of W1 for optimum performance. Tile Bonding Aid, Grouting Vapour &amp; Waterproofing: • Dilute W1 + Water = 1 + 1 by Volume, before adding into the Cement. • It will waterproof and bond tiles very strongly onto glass, glazed tile, steel and wood. Fine silica sand of 0.5 mm diameter can be added for grouting the tile joints. Tile-Over-Tile Bonding: • Dilute W1 + Water = 1 + 1 by Volume, before adding into the Cement. • Thinly brush a coat the Old tile surface with W1 + Cement to about 1.0-mm. • While it is still wet, bond on the tile. Wall Plaster &amp; Cement Mortar for diverse range of Sealing, Repairs &amp; Waterproofing: • Wall plastering, spalling concrete, corrosion preventing prime coat on reinforced steel bar, mending worn out floor and holes, patching works around piping, re-pointing of brick works, tile joints, sealing of old concrete, Asbestos sheet, fish tank &amp; swimming pool. Coating or Injection into Floor Screed, Wall &amp; Absorbent Surface to Prevent Seepage &amp; Waterproof: • Use W1 or Mix W1 + W5 MULTI-BOND, dilute as needed, to coat, or inject into the brick or cement, to seal up porosity. Injection pressure is 100 psi. Normal drying time is 10 days at 30°C. Specific Gravity: 1.01 pH: 9.5 Alkaline Colour: Milky Solution Shelf Life: 12 months Slant Shear Bond Strength: Type 1 9.7 N/mm2 Type 2 10.5 N/mm2 Shelf Life: 12 months

FEATURES&nbsp;
Cement added with W1 will have&nbsp;
• Improved bonding strength by 2 to 3 times to 30.57 kg/cm2. Especially good for bonding homogeneous tiles, granites and marble tiles, and to prevent staining.&nbsp;
• Increased flexural and compressive strength by 40% to 100%. Compressive strength to 56.00 N/mm2 . Flexural strength to 10.00 N/mm2 . (ASTM C 39).&nbsp;
• Quicken cement setting time. Reduced surface cracking and dusting, forming a very tight seal. Good for wall plaster, wet area and swimming pool waterproofing.&nbsp;
• 10 to 20 times more resistant to oil, salt water, chloride, acid and vapour penetration. A feature particularly important in steel reinforced concrete structure.&nbsp;
• Improved plasticity and flow (ASTM C 124-71), easier to work with, reduces porosity.&nbsp;
• W1 cement strengthener is deemed to be suitable for use in contact with water intended for human consumption tested against SS375 : 2001.&nbsp;
APPLICATION METHOD&nbsp;
Based on Cement: Sand ratio of 1: 3.&nbsp;
• The amount of water needed is 24 % by weight of cement.&nbsp;
• This can be replaced totally with 24 % or lesser of W1 for optimum performance.&nbsp;
Tile Bonding Aid, Grouting Vapour &amp; Waterproofing:&nbsp;
• Dilute W1 + Water = 1 + 1 by Volume, before adding into the Cement.&nbsp;
• It will waterproof and bond tiles very strongly onto glass, glazed tile, steel and wood. Fine silica sand of 0.5 mm diameter can be added for grouting the tile joints.&nbsp;
Tile-Over-Tile Bonding:&nbsp;
• Dilute W1 + Water = 1 + 1 by Volume, before adding into the Cement.&nbsp;
• Thinly brush a coat the Old tile surface with W1 + Cement to about 1.0-mm.&nbsp;
• While it is still wet, bond on the tile.&nbsp;
&nbsp;Wall Plaster &amp; Cement Mortar for diverse range of Sealing, Repairs &amp; Waterproofing:&nbsp;
• Wall plastering, spalling concrete, corrosion preventing prime coat on reinforced steel bar, mending worn out floor and holes, patching works around piping, re-pointing of brick works, tile joints, sealing of old concrete, Asbestos sheet, fish tank &amp; swimming pool.&nbsp;
Coating or Injection into Floor Screed, Wall &amp; Absorbent Surface to Prevent Seepage &amp; Waterproof:&nbsp;
• Use W1 or Mix W1 + W5 MULTI-BOND, dilute as needed, to coat, or inject into the brick or cement, to seal up porosity. Injection pressure is 100 psi. Normal drying time is 10 days at 30°C.&nbsp;

Specific Gravity: 1.01&nbsp;
pH: 9.5 Alkaline&nbsp;
Colour: Milky Solution&nbsp;
Shelf Life: 12 months&nbsp;
Slant Shear Bond Strength: Type 1 9.7 N/mm2&nbsp;&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Type 2 10.5 N/mm2&nbsp;&nbsp;
Shelf Life: 12 months&nbsp;&nbsp;

Merek:	SY
Model:	W1