UHU GLUE

艺术与学校用品

Art & School Supplies

Perlengkapan Seni & Sekolah

Kelengkapan Seni & Sekolah

อุปกรณ์ศิลปะและโรงเรียน

art-school-supplies

办公& 家居

Office & Home

office & home

Kantor & Rumah

Pejabat & Kediaman

บ้านและสำนักงาน

office-home

文具

Stationeries

stationeries

Alat Tulis

Alatulis

เครื่องเขียน

UHU Epoxy Ultra Strong, UHU Plus Endfest 300  

Universal strong dual-component epoxy adhesive 

Resistant to temperatures between -40 °C and +100 °C

Suitable for repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex®).

Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Only apply at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and the hardener.

The surface must be dry, clean and free of dust and grease.

Degrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper).

Mix the components by means of the supplied mixing bowl and spatula.

1 ml = approx 10 cm² at a film thickness of 1 mm

Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour. Apply the mixture, which at room temperature (+20 °C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials. Join the materials and keep them in place for 7 hours. Be careful not to move the parts before the adhesive has cured. Resin and hardener must not come into contact with each other unless for usage.

Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.

Close well after use. For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5 °C.

Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.

Store in tightly closed packaging in a dry, cool and frost-free place.

<h3 class="md-block-header-three">UHU Epoxy Ultra Strong, UHU Plus Endfest 300 </h3>TUBE 2 X 10 ML or TUBE 33 G Universal strong dual-component epoxy adhesive PROPERTIESSuper-strong (up to 170 kg/cm²)Resistant to temperatures between -40 °C and +100 °CFillingWater resistantChemical resistantPaintable APPLICATIONSUITABLE FOR:Suitable for repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex®).NOT SUITABLE FOR:Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber. HANDLINGBEFORE USE:Working conditionsOnly apply at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and the hardener.Personal safetyPreferably wear gloves.Surface requirementsThe surface must be dry, clean and free of dust and grease.Preliminary surface treatmentDegrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper).ToolsMix the components by means of the supplied mixing bowl and spatula.Mixture ratio1:1Coverage1 ml = approx 10 cm² at a film thickness of 1 mmDURING USE:Directions for usePress out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour. Apply the mixture, which at room temperature (+20 °C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials. Join the materials and keep them in place for 7 hours. Be careful not to move the parts before the adhesive has cured. Resin and hardener must not come into contact with each other unless for usage.AdviceSome types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.Points of attentionClose well after use. For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5 °C.AFTER USE:Stains/residueRemove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.Storage conditionsStore in tightly closed packaging in a dry, cool and frost-free place. Comes in box of 10

<h3>UHU Epoxy Ultra Strong, UHU Plus Endfest 300&nbsp;&nbsp;</h3>
TUBE 2 X 10 ML or TUBE 33 G&nbsp;
Universal strong dual-component epoxy adhesive&nbsp;

PROPERTIES
Super-strong (up to 170 kg/cm²)
Resistant to temperatures between -40 °C and +100 °C
Filling
Water resistant
Chemical resistant
Paintable

APPLICATION
SUITABLE FOR:
Suitable for repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex®).
NOT SUITABLE FOR:
Not suitable for Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

HANDLING
BEFORE USE:
Working conditions
Only apply at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and the hardener.
Personal safety
Preferably wear gloves.
Surface requirements
The surface must be dry, clean and free of dust and grease.
Preliminary surface treatment
Degrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper).
Tools
Mix the components by means of the supplied mixing bowl and spatula.
Mixture ratio
1:1
Coverage
1 ml = approx 10 cm² at a film thickness of 1 mm
DURING USE:
Directions for use
Press out an equal amount of both components onto the enclosed mixing tray. Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour. Apply the mixture, which at room temperature (+20 °C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials. Join the materials and keep them in place for 7 hours. Be careful not to move the parts before the adhesive has cured. Resin and hardener must not come into contact with each other unless for usage.
Advice
Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.
Points of attention
Close well after use. For optimum performance it is important to create a larger amount of adhesive and mix it very well. Curing time depends on the temperature. Adhesive does not cure below +5 °C.
AFTER USE:
Stains/residue
Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.
Storage conditions
Store in tightly closed packaging in a dry, cool and frost-free place.

Comes in box of 10

UHU Epoxy Ultra Strong 2X10ML, Plus Endfest 300 15MLX2

uhu epoxy ultra strong 2x10ml, plus endfest 300 15mlx2 art & school supplies perlengkapan seni sekolah glue kelengkapan glue/乌湖胶 环氧树脂超强 2x10ml，加上 艺术与学校用品 乌湖胶

Unit	Diskon	Harga Satuan
1	-	Rp 1.046.244
2 ~ 3	2% OFF	Rp 1.023.227
4 ~ 5	4% OFF	Rp 1.002.302
6 ~ 7	6% OFF	Rp 979.285
8 ~ 9	10% OFF	Rp 946.851
10++	13% OFF	Rp 910.233

UHU Epoxy Ultra Kuat, UHU Plus Endfest 300